PROAIM Cinema Series Magnus User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Magnus Camera Rickshaw Support (RCSW-MGNS)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
Main Frame of Magnus Camera Rickshaw Jockey Wheels
Seat & Seat Post
Wheels

2
ATTACHING JOCKEY WHEELS
Remove the caster lock nut and, connect it with
the mainframe.
Magnus Rickshaw Setup
NOTE: We recommend to aach the caster
locking nut from the top of the jockey wheel
sha for safekeeping.
 For adjusng the fricon of jockey wheel,
ghten / loosen the provided knob.
 Open up the outer locking lever on the main
axle to aach both main wheels. The pull-pin
will click on its place, now secure the locking
lever to secure main wheels.
Begin by taking out the mainframe from the
case.
 Now open up the Steering bar secon, adjust
it at the desired angle, and secure with
provided knobs.
 To disassemble the wheel, open-up outer
locking lever and pull the Lever to release the
wheel.

3
ATTACHING SEAT
Place seat post onto seat-bridge, set the
desired height posion, insert safety pin to
secure as shown.
NOTE: Tyres are deated for shipping, please inate to desired pressure. Maximum pressure limits are
printed on the tyres.
 Jockey Wheel: The rear pneumac Jockey
wheels run in any direcon smoothly;
straight, le/right or circular. Angle
adjustment knob provides dierent shoong
angles with stable performance. The Jockey
wheels are removable.
 Foot Rest Posion: To Adjust the foot rest
posion, loosen the locking knob, adjust the
foot rest to the appropriate posion and
ghten the locking knob.
 Use locking knob to secure seat.
Seat Posion: Adjust fore/a seat posion by
loosening the seat bridge locking knobs.
remembering to re-ghten them once the
required posion is found.

4
YOUR PROAIM MAGNUS VERSATILE CAMERA RICKSHAW SUPPORT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 To adjust the axle width, release the inner
axle locking lever and extend the axle on
both sides to desired length and lock the
inner lever.