PROAIM Gravita User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Gravita 75mm Camera Tripod Stand
(TP-GVTA-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Gravita 75mm
Dual Stage Tripod
3 x Feet
Bag
What’s In The Box

2
Gravita Tripod Stand Setup
• Properly spread and open all the legs of the
tripod stand and aach rubber tripod shoes
to the feet of the stand.
• Then, pull the rubber tripod shoe grip &
secure it. Follow the same process to aach
the remaining rubber tripod shoes.
NOTE: It has rubber feet equipped with twin
spikes, suited for indoor and outdoor use, as
well as any terrain.
• Loosen all the three knobs of the dual stage
tripod and you can adjust height according to
your requirement by sliding.
• Aer adjusng the height, re-ghten the
knobs and properly secure it.
• To adjust the height of the tripod, loosen all
the three adjustment knobs. You can adjust
the tripod to the desired height and then
re-ghten the knobs securely.
NOTE: The tripod legs are independently
adjustable in length and extend from 17" to 61".

3
• The spreader can be adjusted according to
the requirement by loosening the knob of the
mid level spreader. Then secure the spreader
ghtly with the help of the knob.
NOTE: It uses a mid-level spreader for
signicant control over the tripod footprint.
• You can also collapse the spreader by
loosening the center knob on the mid-level
spreader.
NOTE: This two-stage aluminum tripod has
3-secon dual tandem legs that oer excellent
torsional rigidity along with easy height
adjustment.
• Remove the knob of the 75mm Bowl Fluid
Head (Not Included) and mount it on the
Tripod Stand.
• Then, properly ghten and secure the knob of
the Fluid Head (Not Included) from the
boom.

4
• Loosen the uid head (Not Included) knob
and then remove the plate.
• Aach the camera plate to the boom of the
camera (Not Included), then secure it with
the help of a screwdriver, as shown in the
image.
• Pull the knob of the uid head, then slide and
mount the camera (Not Included), same as
shown in image.
• Gravita Tripod Stand Setup is ready to use.
Fluid Head Setup

5
YOUR PROAIM GRAVITA 75MM CAMERA TRIPOD STAND
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.