PROAIM P-TMGC-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Tablemount Geared Column (P-TMGC-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Magnec Crank-Lever
Index Markings
3/8” Screw
(Camera Mounng)
Locking Knob
Grip Clamp
Proaim Tablemount Geared Column

2
Tablemount Geared Column Setup
 Attach the table mount Geared Column to
the table through the grip clamp affixed to
the geared column.
NOTE: The column comes with a jaw-like grip
clamp that ts on any table, shelf or ladder
with a width of 18-38mm and fastens securely.
 Pull out the magnetic Crank-Lever and adjust
the index marking accordingly with the help
of the Crank-Lever, as shown in the image.
 Aer adjusng the index marking, stabilize it
at the place where it is required with the
help of a knob.
NOTE: Index marking on the column facilitates
precise height adjustment between 2”-25”.
 After attaching the Tablemount Geared
column to the table, secure it properly with
the help of the locking knob from the bottom
side.
 Loosen the locking knob of the Tablemount
Geared Column.
NOTE: It comes with a crank lever that lets
you adjust the height with exact precision.
 Mount the Superball Camera Tripod Ball
Head on Tablemount Geared Column by
matching the threads.

3
 After mounting the camera (Not Included),
secure it properly using the knob, as shown
in the picture.
 After mounting the Superball Camera Tripod
Ball Head on the column, rotate it to secure
it properly and then mount the camera
(Not Included) on it.
NOTE: The camera can be rmly aached to
the column by means of a 3/8" screw.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM TABLEMOUNT GEARED COLUMN
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)