PROAIM TP-TRBS-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
13.4 Triple Riser Stand w 5/8” Mount (TP-TRBS-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Triple Riser 5/8” Baby Stand
What’s In The Box

2
Triple Riser Stand Setup
• Loosen the knob of the Triple Riser Stand and
spread the tripod legs.
• Aer spreading the legs, re-ghten its knob.
• Now, loosen both knobs of the Triple-Riser
Stand.
• Aer loosening the knob, adjust the height of
the Stand.
• Feature: Triple-Riser Stand features a broad
foot base, collapsible legs, and a middle-level
spreader, ensuring exceponal stability both
indoors and outdoors.
• Aer adjusng the height of the Stand,
re-ghten both the knobs.

3
• Loosen the boom knob of the Triple Riser
Stand and increase its height, as shown in the
image.
• Re-ghten the knob aer increasing its
height.
• Similarly, loosen the center knob of the Triple
Riser Stand and increase its height.
• Now, re-ghten the knob.
• Loosen the top knob of the Triple Riser Stand
and increase its height.
• Now, Re-ghten the top knob.
• You can adjust the height of the Triple Riser
Stand per your requirement.
NOTE: Triple Riser 5/8 Baby Stand provides
unparalleled support, stability, and elevaon for
heavy xtures and grip equipment.

4
• Loosen the knob of the Screen (Not Included)
and mount it on the Triple Riser Stand via the
5/8” baby pin.
Screen Setup
• Aer mounng the Screen, re-ghten the
knob.
Feature: The 5/8" baby pin allows mounng
studio equipment like lights, reectors, and
other support accessories, providing you with
versale opons for your creave endeavors.
4 Secon Adjustable Height Range

5
YOUR PROAIM 13.4FT TRIPLE RISER STAND W 5/8” MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Aer balancing the Leveling Leg, re-ghten
the locking knob.
NOTE: The stand is equipped with a leveling leg
that lts up to 6 inches, accompanied by a
convenient locking knob that facilitates
eortless adjustments.
• Loosen the locking knob of the levelling leg
and extend the leveling leg per your
requirement.
Leveling Leg For Uneven Surface

6
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.