PROAIM CINEMA DL-PLRS-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Polaris Portable Dolly with Universal Track Ends (DL-PLRS-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
Polaris Dolly with 16 wheels
& ight Case
Conversion
Ring 75mm Bowl
Adapter 100mm Bowl
Adapter
Break System
2 x Universal Track
Ends
Center Support

2
Note: Here we have used 8 track
(not included) for assembling purpose. So, for
longer track, you need to place the central
support in the middle of the track, as shown in
photo.
Polaris Dolly Setup
 Now place the dolly onto the track. The
handles part of the dolly plaorm should be
inside of the track as shown. Make sure all
wheels are aligned correctly on the track and
dolly runs smoothly.
 Mount the break bracket on side of the dolly
plaorm & ghten the knob. Adjust the
posion of the bracket so it goes under the
track to prevent the plaorm from lng
out.
 Insert the universal track ends on the track
(not included). Use the supplied long thumb
screws to lock the track into posion.
 Now mount the 75mm bowl adapter onto
the dolly plaorm and ghten properly with
the help of Allen key, as shown.
Note: If you need higher level shots, then you
can put Polaris Dolly on C-Stands (not
included).
Note: Assembly steps for 75mm/100mm
Bowl are same.
 Mount the track ends onto C-stand (not
included) and ghten the provided knob to
secure it properly.

3
 Aach the Centre Support Bar under the
centre of the track system with help of a
Support stand (not included).
 Now mount your Fluid Head (not included)
onto the Plaorm, and ghten the knob.
YOUR PROAIM POLARIS PORTABLE CAMERA DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Then mount your camera setup.