PROAIM CINEMA LV-4WAY-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is
listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Assembly Manua l
4-Way Camera Leveller (LV-4WAY-01)
Proaim 4-Way Leveller

2
4-Way Leveller Setup
 Loosen and remove Castle Ring from the
boom of the 4-Way Leveller, as shown in the
image.
 Mount the Leveller on a tripod stand
(Not Included) and ghten it with the castle
ring from the boom.
 As shown in the image, you can loosen an
unlocking knob to rotate/swivel the Leveller.
 The 4 An-Slip Levelling Knobs provide a lt
angle of up to 7°. Loosen any knob and adjust
the lng angle according to your setup
requirement.
YOUR PROAIM 4 WAY CAMERA LEVELLER – MITCHELL TO MITCHELL/EURO MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OTPIONAL ACCESSORIES)

3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling
in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.