PROCET EN-PEX4GBC User manual

ＥＮ－ＰＥＸ４ＧＢＣ ＰｏＥ Ｅｘｔｅｎｄｅｒ
ｗｗｗ．ｐｒｏｃｅｔｐｏｅ．ｃｏｍ
Ｑｕｉｃｋ Ｉｎｓｔａｌｌａｔｉｏｎ Ｇｕｉｄｅ

Ｄｅｃｌａｒａｔｉｏｎ
The symbol indicates that the product should not be
discarded as unsorted waste but must be sent to separate
This document belongs to PROCET company. It is not
allowed to reproduce and modify without the original
author's permission. It is PROCET's policy to improve its
products as new technology, components, software, and
firmware at any time. PROCET, therefore, reserves the right
to change specifications without prior notice. Please
follow WEEE (Waste Electrical and Electronic Equipment)
disposal instructions for old electronic products.Please do
not dispose of the old product in your general household
Declaration
waste bin.
collection facilities for recovery and recycling.
Ｃｏｐｙｒｉｇｈｔ©２０２3Ｃｒｅａｔｉｖｅ Ｌｉａｎｊｉｅ Ｎｅｔｗｏｒｋ Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．Ｌｔｄ
Ａｌｌ ｒｉｇｈｔｓ ｒｅｓｅｒｖｅｄ．

Ｉｎｔｒｏｄｕｃｔｉｏｎ
Ｏｖｅｒｖｉｅｗ
Network Engineers
Network Administrators
Ｔｈｅ ｉｎｓｔａｌｌａｔｉｏｎ Ｇｕｉｄｅ ｆｏｒ ＥＮ－ＰＥＸ４ＧＢＣ ａｎｄ ｍａｉｎｌｙ ｉｎｔｒｏｄｕｃｅｓ ｔｈｅ ｈａｒｄｗａｒｅ
ｓｐｅｃｉｆｉｃａｔｉｏｎ， ｉｎｓｔａｌｌａｔｉｏｎ ｍｅｔｈｏｄｓ， ａｎｄ ｐｒｅｃａｕｔｉｏｎｓ ｏｆ ｔｈｅ ｉｎｓｔａｌｌａｔｉｏｎ． Ｔｈｅｒｅ
ｍａｙ ｂｅ ｄｉｆｆｅｒｅｎｃｅｓ ｉｎ ｔｈｅ ａｐｐｅａｒａｎｃｅ ａｎｄ ｃｏｎｆｉｇｕｒａｔｉｏｎ ｆｒｏｍ ｏｔｈｅｒ ｍｏｄｅｌｓ． Ａｌｌ
ｐｒｏｄｕｃｔ ｉｍａｇｅｓ ｉｎ ｔｈｉｓ ｍａｎｕａｌ ａｒｅ ｆｏｒ ｉｌｌｕｓｔｒａｔｉｏｎ ｐｕｒｐｏｓｅｓ ｏｎｌｙ ａｎｄ ｍａｙ ｄｉｆｆｅｒ
ｆｒｏｍ ｔｈｅ ａｃｔｕａｌ ｐｒｏｄｕｃｔ．
Ｔｈｉｓ ｍａｎｕａｌ ｉｎｃｌｕｄｅｓ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｃｈａｐｔｅｒｓ：
１． Ｐｒｏｄｕｃｔ Ｉｎｔｒｏｄｕｃｔｉｏｎ． Ｉｎｃｌｕｄｉｎｇ ｔｈｅ ｂａｓｉｃ ｆｕｎｃｔｉｏｎｓ ａｎｄ ｓｐｅｃｉｆｉｃａｔｉｏｎ ｏｆ ＥＮ－
ＰＥＸ４ＧＢＣ， ａｓ ｗｅｌｌ ａｓ ｔｈｅ ｐｒｏｄｕｃｔ ａｐｐｅａｒａｎｃｅ ａｎｄ ａｐｐｌｉｃａｔｉｏｎｓ ｉｎｔｒｏｄｕｃｔｉｏｎ．
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｉｎｔｒｏｄｕｃｔｉｏｎ． Ｉｎｔｒｏｄｕｃｉｎｇ ｔｈｅ ｐｒｅｐａｒａｔｉｏｎ ｗｏｒｋ ａｎｄ ｐｒｅｃａｕｔｉｏｎｓ
ｂｅｆｏｒｅ ｉｎｓｔａｌｌｉｎｇ ｔｈｅ ｐｒｏｄｕｃｔ．
３． Ｐｒｏｄｕｃｔ Ｉｎｓｔａｌｌａｔｉｏｎ． Ｔｗｏ ｍｅｔｈｏｄｓ ｏｆ ｐｒｏｄｕｃｔ ｉｎｓｔａｌｌａｔｉｏｎ．
Field Technicians
Fｏｒ Ｗｈｏｍ

１．１ Ｉｎｔｒｏｄｕｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０１
１．２ Appearance．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０１
Ｔａｂｌｅ ｏｆ ｃｏｎｔｅｎｔｓ
１．３ Specification．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０３
２．１ Ｐａｃｋａｇｅ ｃｏｎｔｅｎｔｓ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０４
２．２ Ｉｎｓｐｅｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０４
Ｔａｂｌｅ ｏｆ Ｃｏｎｔｅｎｔｓ
１． Ｉｎｔｒｏｄｕｃｔｉｏｎ 01
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ 04
３．１ Ｉｎｓｐｅｃｔｉｏｎ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．０６
３． Ｉｎｓｔａｌｌａｔｉｏｎ 06

Ｉｎｔｒｏｄｕｃｔｉｏｎ ０１
１． Ｉｎｔｒｏｄｕｃｔｉｏｎ
１．１ Ｉｎｔｒｏｄｕｔｉｏｎ
１．２ Ａｐｐｅａｒａｃｅ
Ｕｐｐｅｒ Ｖｉｅｗ
ＥＮ－ＰＥＸ０４ＧＢＣ ｉｓ ａ ４－ｐｏｒｔ Ｇｉｇａｂｉｔ ＰｏＥ ｅｘｔｅｎｄｅｒ， ｃａｎ ｄｅｌｉｖｅｒ ｐｏｗｅｒ ａｎｄ
ｔｒａｎｓｍｉｔ ｄａｔａ ｔｏ ４ ８０２．３ａｆ/ａｔ ＰＤｓ ｓｉｍｕｌｔａｎｅｏｕｓｌｙ， ｔｏｔａｌ ｐｏｗｅｒ ｂｕｄｇｅｔ ｉｓ ７１Ｗ．
Ｉｔ ｉｓ ｐｏｗｅｒｅｄ ｂｙ ａｎ ｕｌｔｒａ ８０２．３ｂｔ／ＰｏＥ＋＋ ｓｗｉｔｃｈ ｏｒ ＰＳＥ， ｄｏｅｓ ｎｏｔ ｎｅｅｄ ａｎ
ｅｘｔｅｒｎａｌ ｐｏｗｅｒ ａｄａｐｔｅｒ． Ｔｈｅ typical ｐｏｗｅｒ ｉｎｐｕｔ ｉｓ ９０Ｗ． Ｔｈｅ ｔｏｔａｌ ｅｆｆｅｃｔｉｖｅ
ｄｉｓｔａｎｃｅ ｆｒｏｍ ｄａｔａ ｓｏｕｒｃｅ ｔｏ ＰＤ ｉｓ ２００ ｍｅｔｅｒｓ ｏｖｅｒ ＣＡＴ５ｅ／ＣＡＴ６ ｃａｂｌｅｓ．
Ｄａｉｓｙ－ｃｈａｉｎ ２ ｕｎｉｔｓ ｒｅａｃｈｉｎｇ ３００ｍ ｆｒｏｍ ｅｎｄ ｔｏ ｅｎｄ ｏｒ ｂｙ ｓｔａｒ ｔｏｐｏｌｏｇｙ ｃａｎ
ｐｏｗｅｒ ｕｐ ７ ＰＤｓ．
Ｅｑｕｉｐｐｅｄ ａ ＵＳＢ－Ｃ ｐｏｒｔ， ｗｈｉｃｈ ｃａｎ ｄｅｌｉｖｅｒ ｐｏｗｅｒ ｔｏ ｍｏｂｉｌｅ ｐｈｏｎｅ，ｔａｂｌｅｔ ｏｒ
ＵＳＢ－Ｃ ｄｅｖｉｃｅｓ． Ｄｅｓｉｇｎｅｄ ｗｉｔｈ ＯＶＰ， ＯＣＰ， ＳＣＰ ｆｕｎｃｔｉｏｎ．
１－１ Ｕｐｐｅｒ Ｖｉｅｗ
Ｃｏｏｌｉｎｇ ｈｏｌｅ

１－２
０２ Ｉｎｔｒｏｄｕｃｔｉｏｎ
Ｓｉｄｅ Ｖｉｅｗ
１－３
Ｓｉｄｅ Ｖｉｅｗ
Ｆｒｏｎｔ Ｖｉｅｗ
ＰｏＥ
Ｉｎｐｕｔ
Ｆｒｏｎｔ Ｖｉｅｗ
ＰｏＥ Ｌｏａｄ Ｉｎｄｉｃａｔｏｒ
Ｐｏｒｔ
ＰｏＥ Ｉｎｐｕｔ Ｐｏｒｔ
ＰｏＥ Ｌｏａｄ Ｉｎｄｉｃａｔｏｒ
Ｄａｔａ Ｉｎｄｉｃａｔｏｒ
Type-C Output
Port Ｄａｔａ Ｉｎｄｉｃａｔｏｒ

Ｉｎｔｒｏｄｕｃｔｉｏｎ ０３
１．３ Ｓｐｅｃｉｆｉｃａｔｉｏｎ
Items
ＰｏＥ Ｉｎｐｕｔ
ＰｏＥ Ｏｕｔｐｕｔ：802.3af/at, 30W(max)*4 Ports, total 71W
Ｔｙｐｅ－Ｃ Ｏｕｔｐｕｔ：５Ｖ ／ ２．０Ａ （10 W max）
３／６（＋）， １／２（－）
Ｄｅｓｃｒｉｐｔｉｏｎ
Ｏｕｔｐｕｔ
ＰｏＥ out Ｐｏｗｅｒ Ｐｉｎｓ
Ｗｏｒｋ Ｔｅｍｐ．
Ｏｐｅｒａｔｉｎｇ Ｈｕｍｉｄｉｔｙ
Ｏｐｅｒａｔｉｎｇ Ａｌｔｉｔｕｄｅ
Ｓｔｏｒａｇｅ Ｔｅｍｐ．
Ｓｔｏｒａｇｅ Ｈｕｍｉｄｉｔｙ
０℃ ｔｏ ４０℃
２０％－８０％，ｎｏｎ－ｃｏｎｄｅｎｓａｔｉｏｎ
Ｕｐ ｔｏ ２０００ ｍｅｔｅｒｓ
－２０℃ ｔｏ ７０℃
ＩＥＥＥ８０２．３ｉ ／ ＩＥＥＥ８０２．３ｕ ／ ＩＥＥＥ８０２．３ａｂ
ＲＪ４５:
１１６．４ｍｍ Ｘ ７１．３ｍｍ Ｘ ３０．５ｍｍ （１５１．３ｇ）
１０／１００／１０００Ｍｂｐｓ
ＣＥ
ＩＰ２０
Ｎｅｔｗｏｒｋ Ｐｒｏｔｏｃｏｌ
Data Speed
ＩＰ Ｒａｔｅｄ
Ｒｅｇｕｌａｔｏｒｙ Ｃｏｍｐｌｉａｎｃｅ
Ｄｉｍｅｎｓｉｏｎｓ & NW
PoE++/802.3bt/Passive, 44-57Vdc, Typical: 90W
ＥＮ ５５０３２:２０１５／Ａ１１:２０２０
ＥＮ ５５０３５:２０１７／Ａ１１:２０２０
ＥＭＣ
ＰｏＥ Ｌｏａｄ
Ｉｎｄｉｃａｔｏｒ
Green
Ｉｔｅｍｓ Ｓｔａｔｕｓ
Ｓｏｌｉｄ Light
Light Off
Light Off
Ｆｌａｓｈｉｎｇ Light
Light Ｏff
Ｉｎｄｉｃａｔｏｒ Ｄｉｓｐｌａｙ：
PoE Switch is powered off/defective.
No Data transmission
No connection to PD
PD is powered(Default/Normal)
Ｄｅｓｃｒｉｐｔｉｏｎ
10％－90％，ｎｏｎ－ｃｏｎｄｅｎｓａｔｉｏｎ
Ｄａｔａ ａｖａｉｌａｂｌｅ（Ｎｏｒｍａｌ）
Ｄａｔａ
Ｉｎｄｉｃａｔｏｒ
Yellow

０４ Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ
２． Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ
２．１ Ｐａｃｋａｇｅ Ｃｏｎｔｅｎｔｓ
２．２ Ｉｎｓｐｅｃｔｉｏｎ
２．2．１ Connect the device to an 802.3bt standard or passive 90W
PSE or PoE switch and check the PoE Load Indicator is solid green
to ensure proper function before installation.
２．2．２ Ｃｏｎｎｅｃｔ ｔｈｅ ＰｏＥ ｐｏｒｔ ｔｏ ｔｈｅ ＰｏＥ ｐｏｗｅｒｅｄ ｄｅｖｉｃｅ（ＰＤ）． Ｓｕｃｈ ａｓ
ｔｈｅ ＩＰ Ｃａｍｅｒａｓ ｏｒ Ｗｉｒｅｌｅｓｓ ＡＰｓ．
Ａｓ ｓｈｏｗｅｄ ｉｎ Ｆｉｇｕｒｅ ２－１；
Ｃａｕｔｉｏｎ：
Ｐｌｅａｓｅ ｕｓｅ ＰｏＥ ｐｏｗｅｒｅｄ ｄｅｖｉｃｅ（ＰＤ） ｔｈａｔ ｃｏｍｐｌｉｅｓ ｗｉｔｈ
ＩＥＥＥ８０２．３ａｆ／ａｔ ｔｏ ｃｏｎｎｅｃｔ ｔｈｉｓ ｐｒｏｄｕｃｔ． Can not feed
non-802.3af/at standard PD, nor 24Vdc PD.25
!
ＥＮ－ＰＥＸ４ＧＢＣ Ｏｐｅｒａｔｉｏｎ Ｍａｎｕａｌ
Ｏｐｅｎ ｔｈｅ ｂｏｘ ｏｆ ｔｈｅ ＥＮ－ＰＥＸ４ＧＢＣ ａｎｄ ｃａｒｅｆｕｌｌｙ ｕｎｐａｃｋ ｉｔ， ｔｈｅ ｂｏｘ
ｓｈｏｕｌｄ ｃｏｎｔａｉｎ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｉｔｅｍｓ：

２－１
Ｉｎｓｔａｌｌａｔｉｏｎ Ｐｒｅｐａｒａｔｉｏｎ ０５
Ｄｅｖｉｃｅ Ｃｏｎｎｅｃｔｉｏｎ
!
ＰｏＥ Ｓｗｉｔｃｈ
Ｄａｔａ ＆ Ｐｏｗｅｒ
Ｔｙｐｅ－Ｃ Power
Ｏｕｔｐｕｔ
Ｉｎｐｕｔ
ＰｏＥ Data
& Power
Output
ＥＮ－ＰＥＸ４ＧＢＣ
ＰＤ
Ｔａｂｌｅｔ
Ｃａｕｔｉｏｎ：
１．Ｐｌｅａｓｅ ｒｅａｄ ｔｈｅ ｉｎｓｔｒｕｃｔｉｏｎｓ ｃａｒｅｆｕｌｌｙ ａｎｄ ｆｏｌｌｏｗ ｔｈｅ ｓｔａｎｄａｒｄ ｏｐｅｒａｔｉｎｇ
ｐｒｏｃｅｄｕｒｅｓ ｂｅｆｏｒｅ ｕｓｉｎｇ．
２．Ｐｌｅａｓｅ ｐｌａｃｅ ｉｔ ｉｎ ａ ｗｅｌｌ－ｖｅｎｔｉｌａｔｅｄ ａｎｄ ｄｒｙ ａｒｅａ， ａｎｄ ｉｔ ｉｓ ｆｏｒ ｉｎｄｏｏｒ ｕｓｅ
ｏｎｌｙ．
3. Connect a CAT5/5e/6 cable with the RJ45 connector into the RJ45
socket labeled PoE In.The total Ethernet cable length can not exceed 100
meters.
4. Connect a CAT5/5e/6 cable with the RJ45 connector into the RJ45
socket labeled PoE 1,PoE2, PoE3 and PoE4. On the other end of the
CAT5e/6 cable, connect to your PoE powered Device (PD, such as IP
Cameras etc). The total Ethernet cable length can not exceed 100 meters.
5.Daisy-chain 2 units reaching 300m from end to end or by star
topology can power up 7 PDs.
６． Ｔｈｅ ｄｅｖｉｃｅ ｍｕｓｔ ｂｅ ｐｌａｃｅｄ ｏｎ ａ ｓｔａｂｌｅ ｓｕｒｆａｃｅ， ｐｒｅｆｅｒａｂｌｙ ａｆｆｉｘｅｄ ａｎｄ
ｍｏｕｎｔｅｄ ｐｅｒｍａｎｅｎｔｌｙ． Ｄｏ ｎｏｔ ｌｅａｖｅ ｉｔ ＂ｄａｎｇｌｉｎｇ＂ ａｎｄ ｕｓｅ ｐｌｕｇｇｅｄ－ｉｎ
ｃａｂｌｅｓ ｉｎ ｔｅｎｓｉｏｎ ａｓ ｓｕｐｐｏｒｔ． Ｄｒｏｐｓ， ｆａｌｌｓ， ａｎｄ ｉｍｐａｃｔｓ ｅｘｐｅｒｉｅｎｃｅｄ ｂｙ ｔｈｅ
ｉｎｊｅｃｔｏｒ ｃａｎ ｃｏｍｐｒｏｍｉｓｅ ｔｈｅ ｉｎｔｅｒｎａｌ ｃｏｍｐｏｎｅｎｔｓ ＆ ｃａｕｓｅ ｐｒｅｍａｔｕｒｅ
ｆａｉｌｕｒｅ．
７． Ｄｏ ｎｏｔ ｐｌａｃｅ ｈｅａｖｙ ｏｂｊｅｃｔｓ ｏｎ ｔｏｐ ｏｆ ｔｈｉｓ ｉｎｊｅｃｔｏｒ． Ａｌｌｏｗ ａｔ ｌｅａｓｔ ５ｃｍ ｏｆ
ｃｌｅａｒａｎｃｅ ｏｎ ａｌｌ ｓｉｄｅｓ ｏｆ ｔｈｅ ｄｅｖｉｃｅ ｆｏｒ ｈｅａｔ ｖｅｎｔｉｌａｔｉｏｎ ／ ｎａｔｕｒａｌ
ｃｏｎｖｅｃｔｉｏｎ.

０６ Ｉｎｓｔａｌｌａｔｉｏｎ
３． Ｉｎｓｔａｌｌａｔｉｏｎ
Ｃａｕｔｉｏｎ：
If it is placed in an outdoor environment, please install the device
in a waterproof case with a height of 45cm if possible.
Ｗａｔｅｒｐｒｏｏｆ Ｅｔｈｅｒｎｅｔ ｃａｂｌｅｓ ｓｈｏｕｌｄ ｂｅ ｗｉｔｈ ａ ｐｒｏｔｅｃｔｉｖｅ ｓｈｅａｔｈ．
ＣＡＴ５ｅ／６ ｃａｂｌｅｓ ａｒｅ ｒｅｃｏｍｍｅｎｄｅｄ．
!
３．１ Ｉｎｓｐｅｃｔｉｏｎ
Inspect the installed equipment before putting it into operation：
· Make sure the PD is compliant with our product.
· Make sure the Ethernet cable connection is correct.
Make sure all connections are correct, inspect all the indicators.

Qualication Card
PASS
Ｃｒｅａｔｉｖｅ Ｌｉａｎｊｉｅ Ｎｅｔｗｏｒｋ Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．Ｌｔｄ
www.procetpoe.com