Prodigy P500 User manual

OWNER’S MANUAL
PRODIGY
P500

2 3
PRODUCT INFORMATION
Safety Instructions....................................................4
Proper Usage...............................................................6
Parts..................................................................................7
Preparation....................................................................8
Parts..................................................................................11
PRODUCT OPERATION
How to Use.................................................................10
Maintenance................................................................12
Troubleshooting........................................................14
Specifications.............................................................16
WARRANTY
Warranty........................................................................18
TABLE OF CONTENTS

4 5
SAFETY INSTRUCTIONS
Use this appliance only for its intended use as described in this manual. When
using electric appliances, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
Warning- To reduce the risk of burns, electric shock, fire, or injury:
1. Do not touch the power cord with wet hands or use while bathing.
2. Do not splash water or detergent on the main body or power plug.
3. Unplug immediately if dropped into water. Do not reach into the water.
4. Handle the power cord carefully. Do not forcibly bend or pull it.
5. Do not use a damaged power cord or electrical outlet, and do not plug
the appliance in until water is connected.
6. Keep the power cord away from heated surfaces.
7. Close supervision is necessary when this appliance is used by, on,
or near children.
8. Never drop or insert any objects into any openings or hoses.
Only throw toilet paper into the toilet.
9. Do not let hair, lint, or similar materials block any openings on
the appliance.
10. Do not step on or place heavy objects on the seat, lid or main body.
11. Do not use outdoors.
12. Connect this product to a properly grounded outlet only.
Do not exceed the rated voltage of the outlet.
13. Do not place hands or clothing on the warm air dryer.
14. Do not place fire sources near the appliance, such as cigarettes.
15. Avoid exposing to product to direct sunlight for extended
periods of time.
This product should only be serviced by qualified technicians. Consult
customer support if you have any questions. Consult customer support if you
have any questions.
E: [email protected]om
P: 847.458.2334

6 7
PROPER USAGE PARTS
•Turn off the power when the
product will not be used for an
extended period of time.
•Save water by pressing the
corresponding flush button.
Function Description
Seat Sensor Detects when a user is seated
Seat Temperature Adjust the seat to a preset temperature.
(93.2°F, 98.6°F, 104°F)
Night Light Turn the night light on or off.
Full Flush Activate a full flush (1.25 gallons*)
Small Flush Automatically activates the proper size flush
when user is finished. (0.84 gallons*)
Auto Flush Automatically activates the proper size flush
when user is finished.
Manual Flush Allows for manual flushing during a power outage.
Smart Protection Turns off the heated seat when a user is detected
for over 30 minutes.
Anti Bacterial Specially coated seat and lid to protect against bacteria.
Self Check Automatically detects any malfunctions before use.
*See specifications for flush details.

8 9
PREPARATION
1. Place the batteries into the remote control.
•Open the battery cover on the back.
•Put the 3 AA batteries in the proper position.
•Close the cover.
2. Plug in the power cord
3. Adjust the water flow with the shutoff valve.
•If the water pressure is too high, water may splash or overflow when
flushing. Reduce the water pressure by turning the water shutoff valve.
4. Check the display panel
•Is the power indicator on? If not, press the button to turn on the product.
•Is the seat indicator on? If not, press the seat temp button to activate the
heated seat.
Battery Tips
•Use the same battery type when replacing old batteries.
•Remove the batteries when the product will not be used for an extended
period of time.
•Settings may be initialized after replacing batteries. Configure the
settings again.
Notice: Turn off the power on the main body when replacing batteries or
cleaning the product.

10 11
HOW TO USE
1. Sit on the seat
•Skin contact is required to activate the seat sensor
2. Seat temperature
•Press the seat temperature button on the remote or main body controls
to cycle between preset temperatures. (93.2°F, 98.6°F, 104°F)
3. Flush the toilet
•Stand up to activate th auto flush, or press the desired flush button on
the remote or main body controls.
4. Night light
•Press the night light button on the remote or main body controls to turn
the light on or off.
Notice: The Flush button cannot be used continuously.
Wait about 10 seconds for next flush
5. Manual Flushing
Use the manual flush buttons during a power outage.
•Press the Bowl button for 3 seconds.
•Press the Jet button for 5 seconds.
•Press the Bowl Flush button again for 3 seconds.
Jet
Bowl
•The Bowl button
circulates water around
the toilet bowl.
•The Jet button flushes
debris away.

12 13
MAINTENANCE
Press the button on the main body controls for 3 seconds to cancel the auto
flush function before performing maintenance.
Cleaning
Clean the Prodigy with a soft wet cloth. If necessary, a neutral cleaning
solution may be used. Be sure to wipe the product dry when finished.
Make sure the remote control transmitter and receiver are clear of any
dust or debris.
Extended Travel
Unplug the power cord if the product will not be used for an extended
period of time.

14 15
If your product is not operating properly, please refer to the following
information. If the problem persists, contact customer support.
Please unplug the power cord when requesting for repair service
ATTENTION
If water is leaking, immediately close the water shutoff valve.
Power Supply
Trouble Possible Causes Solution
The unit is
not working.
Is the circuit breaker
turned off?
Turn on the circuit breaker.
Is power indicator light on? Press the power button to
turn the unit on.
Flushing by Remote Control
Trouble Possible Causes Solution
I can’t flush
the toilet with
the remote
control.
Are the batteries
running low?
Replace the batteries
Did you press the button
multiple times.
Wait 10 seconds before
activating another flush.
Is the receiver or
transmitter dirty?
Clean the receiver
or transmitter.
Others
Trouble Possible Causes Solution
Debris is not completely
flushing down.
Is the shutoff valve
open enough?
Open the shutoff
valve sufficiently.
Water is not flushing. Is the shutoff valve
closed?
Open the shutoff
valve sufficiently.
Water is leaking at the
hose connection.
Is the hose loose? Tighten the hose.
TROUBLESHOOTING

16 17
SPECIFICATIONS
Model No. Prodigy P500
Rated Power AC 120V, 60Hz, 65 W
Power Cord Length 5 feet (1.5 meters)
Toilet Water
Consumption
Full flush: 1.28 gallons*
Small flush 0.83 gallons*
Flushing
System
Dual Jet Flushing
Heated Seat Seat
Temperature
Adjustable, 34°C - 40°C
/93.2°F - 104°F
Heat Capacity 55 W
Safety Device Thermal cutoff, Temperature sensor
Water pressure Min: 1.5 kgf/cm (with 20 l/min flow)
Max: 7.5 kgf/cm
Inlet Water Temperature 5°C - 35°C / 41°F - 95°F
Ambient Temperature 5°C - 40°C / 41°F - 104°F
Dimension W 161.4 in x L 283.4in x H 206.6in
*Average test results based upon a fixed water pressure of 40 psi.

18 19
WARRANTY
Our goal is to provide you with the highest quality products
and service possible.
If you have any questions about your product, please feel free
to contact support.
We warrant our products to be free from manufacturing defects under
normal use and service for a period of time limited to 3 years from the
date of purchase.
This warranty covers 100% of all Bio Bidet parts and Bio Bidet labor costs
associated with the product.
Our obligation to you under this warranty is limited to parts, repair,
or replacement, at our option, of defective products or parts, provided
the products were properly installed and used in accordance with the
instructions. We reserve the right to make inspections in order to determine
the cause of any defects. We will not charge for labor or parts in connection
with warranty repairs or replacement performed by our technicians. We are
not responsible for the cost of removal, return, 3rd part repair services, and/or
re-installation of products.
This warranty does not apply to:
1. Damage or loss from a fire, earthquake, flood, etc.
2. Damage or loss resulting from any unreasonable use, abuse, negligence
or improper maintenance.
3. Damage or loss from improper installation, removal, repair, or
modification.
4. Damage or loss resulting from sediment or other matters contained in
your water system.
For more warranty service information, please contact Bio Bidet.
Only the original purchaser may submit a claim under this warranty
This warranty is our only warranty covering your product. Repair or
replacement as provided under this warranty shall be the exclusive remedy
available to you. We shall not be responsible for the loss of the product or
other incidental or consequential damage or expenses you may incur, or for
labor or other costs due to installation removal, third party repairs, or other
expenses not previously stated. Except to the extent prohibited by applicable,
any implied warranties, including that of merchantability or fitness for use, are
expressly limited to the duration of this warranty.
Please keep your purchase record to validate your warranty.
The following information may be necessary for various services: Purchaser
Name, Address, Telephone Number, Product Model, Purchase Date.
Support agents are available Mon-Fri, 9:00 AM - 5:00 PM CST
847.458.2334
[email protected]om
www.biobidet.com

Thank You
Technical Support/Customer Service
7900 S Route 31 Crystal Lake, IL 60014
T: 847.458.2334
U.S. TOLL FREE: 877.339.5214
[email protected]om
www.biobidet.com