Connection
Any questions? dulconnex@prominent.com
dulconnex.prominent.com
06/20
DULCOnneX &
UV System Dulcodes LP
Quickstart
English
On your Mobile / Tablet / PC,
connect to a WiFi network with
Name / SSID: DULCOnneXgwXXXX
Password: FD1960de01
(„XXXX“ are the last 4 digits of the
serial number of your DULCOnneX Gateway)
2. Connect to WiFi
“DULCOnneXgwXXXX“
Name / SSID
DULCOnneXgwXXXX
Password
FD1960de01
3.
Open your web browser and type in following address:
192.168.42.101
Enter Name / SSID & Password of the WiFi network
you want the DULCOnneX Gateway to be connected to.
Enter the serial number of your Dulcodes LP.
You can find the serial number on a sticker on the
device housing.
Also make sure to choose the correct region:
0= Europe (default) 1= North America 2 = Asia
Press Save and wait for the DULCOnneX Gateway
to reboot.
Connect the DULCOnneX Gateway to the web
http://192.168.42.101
Name / SSID Your_WiFi
Password xxxxxxxx
Region Europe
(0)
North
America
(1)
Asia
(2)
Serial number xxxxxxxx
Page 2
Start the DULCOnneX Gateway
by connecting the power cable.
1. Start the
DULCOnneX Gateway
Setup DULCOnneX Gateway
Drill a hole into the cabin of your Dulcodes LP and put the
2m CAN cable through it, using the M25 Skintop and Locknut.
1.
Connect your flange to the connector XC2 on top of the board.
2.
Connect your 2m CAN cable to both the flange and your
DULCOnneX Gateway, using CAN Bus cables,
CAN Bus T-connectors and CAN Bus terminators.
3.
Checklist
Please make sure you
have the following items:
DULCOnneX Gateway
DULCOnneX access code
Dulcodes LP
Flange M12 5pol. cpl. MASCON
XXXXXX
M12 CAN Bus cable 2,0m
M12 CAN Bus cable 0,5m
M12 CAN Bus terminators
(male / female)
M12 CAN Bus T-Connectors
Drill
WiFi connection
Smartphone, tablet or PC
M25 Skintop and a locknut
