Pronto Networks Unifi OneBox User manual

Unifi OneBox
Quick Start Guide
Package of Contents
1 Unifi OneBox
1 Power adapter
1 Unifi OneBox Holder
Version - V3 - 23rd June 2014

Unifi OneBox
The Unifi OneBox provides a plug and play solution to Wi-Fi networks ranging from 100 to 500
concurrent users. An ideal solution for Budget Hotels, Educational Campus, and other networks
where Wi-Fi authentication and monetization is essential, the Unifi OneBox includes a Dashboard
for easy network configuration, drag and drop Login pages, guest session monitoring, graphical
reports, voucher management, and many other salient features.
Step 1: Network Installation
❏Connect an Ethernet cable from the ISP modem/router to the LAN1 port of the Unifi
OneBox.
❏Connect the power adapter to the Unifi OneBox and power ON the unit. The PWR LED on
Unifi OneBox will light up in Solid Blue.
❏Connect one end of another RJ45 Ethernet cable to the LAN2 port and other end to your
network switch.
❏Connect your computer to the network switch. Ensure your computer network setting is in
DHCP mode.
❏Please refer to the network diagram below:

Step 2: DashBoard Configuration
Launch a web browser from your computer connected to the network switch and access the dash
board link “http://192.168.4.1/OneBox”.
Your dashboard appears with ‘’Initial Configuration’’ web page.
1. Owner Info
❏Enter the owner information, such as Name, Email ID, Address and Contact Number. The
contact number provided in this tab is used by the OneBox HelpDesk team to contact the
Location if required.
❏Choose ‘’Time Zone’’ from the drop down list, to set time in Unifi OneBox.
2. New Login
❏Enter the desired User Name , Password and Confirm Password for Unifi OneBox Login.
3. Tax Configuration
❏Click on the settings ‘’ICON’’ on “TAX” window and configure the “TAX” parameters and click
Create.
❏Select the “TAX” checkbox to apply TAX for vouchers, if TAX is not required uncheck the
‘’TAX’’ checkbox.
4. Fast Vouchers
❏Select the required vouchers to be distributed to Guests from preconfigured Fast vouchers,
such as Hourly, Half Day and Full Day.
5. Network Configuration
❏Select the ‘’Network type’’, if Static IP is chosen a new window ‘’Static Configuration’’ is
opened. Enter the Static IP address, Default Gateway, Bitmask, Primary DNS and Secondary
DNS. If ‘’DHCP’’ is chosen you can proceed without entering IP address.
Note : Contact your Internet Service Provider to know the ‘’Network Type’’.
6. Available WAN Bandwidth

❏Enter the WAN Bandwidth in ‘’MB’’ to be used by OneBox and Hotel Guests.
7. Click on Save and Continue to complete the configuration.
❏Upon successful configuration, you will see ‘’Unifi OneBox’’ welcome page.
❏Enter the “User Name” and Password configured in ‘’Initial Configuration’’ and login.
Congratulations! Your “Unifi OneBox” is ready to go live.
Click here to know more about ‘’Unifi OneBox’’ and user manual.
For additional assistance, please contact OneBox support at
[e-mail]