EnGenius EOC5510 User manual

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 4/26/2010
Wireless 802.11 a AP/CB
EOC
5
5
10
5GHz 54Mbps 802.11 a 24V PoE
EOC5510 is a long range outdoor wireless Access Point / Client Bridge that
operates in 5GHz frequency. t provides high bandwidth up to 54Mbps and
features high transmitted output power as well as superior sensitivity.
EOC5510 extends radio coverage, avoids unnecessary roaming between
Access Points and ensures a stable wireless connection while reduces the
number of required equipments.
EOC5510 provides user friendly interface including user friendly distance
control ranges from 1KM up to 30KM and RSS LED indicator offering real
time signal status. t comes with PoE injector for convenient outdoor
installation.
EOC5510 enforces transmission security with full support of latest
encryption mechanism including 64/128-bit WEP, WPA and WPA2. With
13dBi internal antenna and superior performance, EOC5510 makes an
optimal wireless solution for both small and large scale projects.
Packa e Content
1* EOC5510
1* PoE njector (EPE-1212)
1* Power Adaptor(24V/0.6A)
1* CD with User’s Manual
1* Q G
1* Metal strap
2* Special screw set

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 4/26/2010
Features
Wireless
- 5GHz t works in 5GHz frequency spectrum
- High output power Transmit output power programmable for different country selections
- High Data Rate High speed transmitting rate up to 54Mbps, supports large payload such as MEPG video
streaming
- Multifunction application Access Point/Client Bridge/Client Router/WDS AP/WDS Bridge
- Long range transmitting Transmit power control and distance control (ACK timeout)
- ignal trength Display LED indicators have the best transmit and receive signal for traffic
communication. And RF signal strength status shown LEDs of 3 colors, making network build-up easier
- Public wireless solution An AP interface that is especially useful in public areas such as hotspots and
enterprise
- Qo (WMM) Enhance performance and density
Networkin
- PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when
failed or disconnected
- VPN Pass Through
Security
- 802.11i WEP, WPA, WPA2 (Encryption support TK P/AES)
- MAC address functions MAC address filter (AP mode)
- 802.1x EEE802.1x Authenticator
- tation isolation
Mana ement
- Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
- Reset & Backup Reset to factory default. User can export all setting into a file via WEB
- MIB M B , M B (RFC1213)
- NMP V1, V2c

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 4/26/2010
Technical Specifications
Hardware Specification
MCU/RF Atheros AR2313+AR5112
Memory 32MB SDRAM
Flash 8MB
Physical nterface 1 x 10/100 Fast Ethernet RJ-45
1 x Reset Button
1 x Antenna Switch ( nternal and External Switch )
1 x SMA Connector
LED indicators Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality
Power Requirements Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC
Regulation Certifications FCC Part 15E, EN301 893, EN 301 489-1/-17, EN60950, C Certification
RF Specification
Frequency Band 802.11a = 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
Modulation Technology OFDM = BPSK, QPSK, 16-QAM, 64-QAM
Operating Channels 802.11a = See the Table1
Receive Sensitivity (Typical) 802.11a -92dBm @ 6Mbps, -73dBm @ 54Mbps
Available transmit power
(Average power)
FCC ETS
Frequency Power Frequency Power
5.150~5.350
GHz
IEEE802.11a
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps
5.150~5.350
GHz
IEEE802.11a
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps
5.470~5.725
GHz
IEEE802.11a
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps
5.470~5.725
GHz
IEEE802.11a
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps
5.725~5.825
GHz
IEEE802.11a
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps
5.725~5.825
GHz
IEEE802.11a
23dBm@6~24Mbps
23dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 4/26/2010
Internal Antenna
(Dual Polarization)
Antenna Specification
Gain 10dBi
Radiation Directional
Frequency Band Ran e 5.1-5.8GHz
Horizontal -3dB Bandwidth 40
o
Vertical -3dB Bandwidth 40
o
Internal Antenna Pattern
External Antenna 1 x SMA connector
Software Features
General
Topology nfrastructure
Protocol / Standard EEE 802.3 (Ethernet)
EEE 802.3u (Fast Ethernet)
EEE 802.11a(2.4GHz WLAN)
Operation Mode 802.11 a
Access Point
Client Bridge
Client Router
WDS AP/CB
LAN DHCP Server
DHCP Client
VPN VPN Pass through
Wireless Channel Selection (Setting varies by countries)
Transmission Rate
11 a : 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Long distance transmission : 1km to 30km
Transmit power table
Antenna Diversity with Dual Polarization
Signal Strength indication using LEDs
PPPoE(CR mode) and PPTP
Narrow Bandwidth 5MHz/10MHz/20MHz Support
P NG function and Trace Route function
MSS D Support
VLAN Support
Preferred SS D
Security WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TK P or AES)
WPA/WPA2 Enterprise (WPA-EAP using TK P)
802.1x Authenticator

* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice. 4/26/2010
Hide SS D in beacons
MAC address filtering, up to 50 field
Wireless STA (Client) connected list
QoS WMM
Management
Configuration Web-based configuration (HTTP)
Firmware Upgrade - Upgrade firmware via web-browser
- Keep latest setting when f/w update
Administrator Setting Administrator password change
Reset Setting - Reboot (Press 1 second)
- Reset to Factory Default (Press 5 seconds)
System monitoring Status, Event Log
SNMP V1, V2c
M B M B , M B (RFC1213)
Backup & Restore Settings through Web
Time setting NTP (Auto-setting of time)
Time setting manually
Environment & Mechanical
Temperature Range Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing) 0%～95% typical
Dimensions 200mm (L) x 50mm (W) x 45mm (H)
Weight 195g
Table1
(Americas (FCC)):
2.412 to 2.462 GHz; 11 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz)
5.745 to 5.825 GHz; 5 channels
(China):
2.412 to 2.472 GHz; 13 channels
5.745 to 5.825 GHz; 5 channels
(ETSI):
2.412 to 2.472 GHz; 13 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.700 GHz, 11 channels
(Israel):
2.412 to 2.472 GHz, 13 channels
5.180 to 5.320 GHz; 8 channels
(Korea):
2.412 to 2.472 GHz; 13 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.620 GHz, 7 channels
5.745 to 5.805 GHz, 4 channels
(Japan2):
2.412 to 2.472 GHz; 13 channels
5.180 to 5.320 GHz; 8 channels
(Sin apore):
2.412 to 2.472 GHz; 13 channels
5.180 to 5.320 GHz; 8 channels
5.745 to 5.825 GHz; 5 channels
(Taiwan):
2.412 to 2.462 GHz; 11 channels
5.280 to 5.320 GHz; 3 channels
5.500 to 5.700 GHz, 11 channels
5.745 to 5.825 GHz; 5 channels