Protech Systems KF-7131 User manual

If you discover any item below damaged or lost,
please contact your vendor.
KF-7130 Kiosk Main Unit x1
This Quick Reference Guide x1
KF-7131
Quick
Reference
Guide
This Quick Reference Guide x1
Ver. Q1
All Rights Reserved. Copyright 2016
Packing Checklist
KF-7131
KF-7131 KF-7131
Specifications
System View
KF-7131 Kiosk Main Unit X1
This Quick Reference Guide X1
Manual / Driver CD X1
Barcode Scanner
Ticket Printer
Card Printer &
Dispenser
NFC Module &
iBeacon
System
CPU Type Intel®Celeron J1900
Chipset Intel®Platform Bay Trail SoC
Memory Support 1 x 204-pin DDR3L-1600 SO-DIMM socket on board, up to 4GB
HDD 512GB 2.5" MLC SSD
Speaker 2 x 2W system speakers
Dimension (WxHxD) 650 mm x 1565 mm x 650mm
System Weight 120 Kg
Power Supply 72 W 100-240V , 7.2A , 50-60HZ
Display
LCD Panel 17” 4:3 LED backlight LCD
Touch 17” Projected Capacitive Touch
Max. Resolution 1280x1024 dots SXGA
Integrated Devices
Wi-Fi_Bluetooth Module FANGTEC AR9462 Combo Mini Card
& Antenna
Web Cam FANGTEC AG5120C24-S1-3F0
Barcode Scanner Riotec FS5022J Barcode Scanner
RFID Module EWTA-M1252U (NFC Reader)
Card Printer & Dispenser HiTi CS-220e Transparent Card Printer
Thermal Printer RING 408PE+
UPS APC Back-UPS 550
I/O Ports
LAN Port 1 x RJ-45, 10/100/1000 Mbps
USB Ports 8 x USB2.0 ports on M/B
8 x USB2.0 on D/B board
Serial Ports 3 x COM ports on M/B
Environment
Operating Temp. 10°C~ 32°C (50°F ~ 90°F)
Storage Temp. 0°C~ 60°C (32°F~ 140°F)
Humidity 20%~ 85% (no condensation)
17” operation touch screen
Speaker
Speaker
Web Cam
If you discover any item below are damaged
or lost, please contact your vendor.
AC Power Cord Cable X1

Quick Setup
KF-7131
All Rights Reserved. Copyright 2016
Safety Precaution
17” Projected Capacitive Touch Kiosk
Step 1.
Connect the AC power cord to the AC power jack and
connect the Ethernet cable to the LAN port. Step 2.
Unlock the top front door and open it. Press the Power Button located on the back of
the top front cover. See the picture below:
LAN Port
AC Power
Jack
Power
Button
• Don’t allow foreign objects to fall into this product.
• If water or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
• When the outside of the case is stained, remove the stain with a neutral washing agent with a dry
cloth.
• Never use strong agents such as benzene and thinner to clean the system.
If heavy stains are present, moisten a cloth with diluted neutral washing agent or with alcohol and
then wipe thoroughly with a dry cloth.
• If dust has been accumulated on the outside, remove it by using a special made vacuum cleaner
for computers.
• Don’t contact the surface of capacitive touch before entering your operation system, or capacitive
touch may have position problems for electrostatics interface.
• Don't exchange the M/B battery by yourself or serious damage may incur.
The following messages are reminders for safety on how to protect your systems from damages and to
extend a long life of the system.
1. Check the Cable Voltage
• Make sure the range of operating voltage between AC 100~240V. Otherwise, the system could be
damaged.
2. Environmental Conditions
• Place your KF-7131 on a sturdy, level surface. Be sure to allow enough space to have easy
access around the system.
• Avoid extremely hot or cold place to install the system.
• Avoid exposure to sunlight for a long period of time or in an airtight space.
• Avoid the system from any heating device or using it outdoors in a cold winter day.
• Bear in mind that the operating ambient temperature is from 10~32°C (50~90°F).
• Avoid moving the system rapidly from a hot place to a cold one and vice versa for condensation
may come from inside of the system.
• Place KF-7131 in strong vibration(s) may cause hard disk failure.
• Don’t place the system close to any radio active device in case of signal interference.
3. Handling
• If the system isn’t fully in DOS mode, adjust BIOS setting as the instruction:
Advanced Chipset Feature →Boot display →choose “LFP”.
• Avoid putting heavy objects on top of the system.
• Don’t turn the system upside down. This may cause the hard drive to malfunction.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
WARNING! Some internal parts of the system may have high electrical voltage. And therefore we strongly
recommend that qualified engineers can open and disassemble the system. The LCD and Touchscreen are
easily breakable, please handle them with extra care.