Provision ISR S3 User manual

Installation Guide
S3

1. Package Contents
2. Camera Controls Introduction
3. Recorder Installation
4. Initial Settings
5. Video Recording Mode Operation
6. Photo Mode Operation
7. Playback Mode Operation
8. Menu Settings Operation
9. Special Features
10. How to connect to the camera
11. The RoadCam APP
12. Specifications
Page 1
Page 2-3
Page 4-6
Page 7
Page 7
Page 7
Page 7
Page 8-9
Page 9-10
Page 11
Page 12
Page 13
CONTENTS

Package Contents:
1
1
Car Camera
Back Camera Car Charger Trim Removal Tool
Quick Guide Car Air Freshener
3M Sticker

Camera Controls Introduction
2
2
13 14
1
2
3
48
7
6
5
Speaker
9
3” screen
11
12
10

3
IconNo. Name Operating Instructions
1
9
10
8
6
11
POWER
Menu
TF card slot
TYPE-C port
- Under Standby mode, press for system settings.
- Under Standby mode, long press to enter WiFi function.
Micro SD (TF) card slot.
Power
Indicator - Red LED: power indicator, LED will turn off after fully charged.
- Connect to a PC for data transmission.
- Connect to the car charger for power supply.
13
14
Reset
R
MIC Microphone
Reset the device to factory settings.
Microphone
7UP
- Under Menu, use the UP/DOWN keys to navigate.
- Under Playback mode, press to browse between playback files.
- Under Playing mode, press to speed Backward.
- Press for more than 3 seconds to turn on/off the camera.
3MODE
- Under Recording mode, press to take a picture.
- Under Standby mode, press to switch between Video mode,
Photo mode and Playback mode.
(Notice: You must stop video recording before mode switching)
M
DOWN
5
- Under Menu, use the UP/DOWN keys to navigate.
- Under Playback mode, press to browse between playback files.
- Under Playing mode, press to speed Forward.
- Under standby mode, press to turn on/off the recording voice.
OK
- Under Video mode, press to stop/start recording.
- Under Photo mode, press to take a picture.
OK
4
- Under Menu mode, press OK to confirm the settings.
- Under Playback mode, press to play/stop video files.
AV Connect the Back Camera.
2LOCK Under recording mode, press to Lock Current video.
- Blue LED: indicating the camera is recording.
Recording
Indicator
12

Recorder Installation
3
1. Before starting video recording, please insert a Micro SD (TF) card (not
included) into the slot until it locks in place.
- The Micro SD (TF) card capacity can
be up to 128GB (class 10 and above).
- The Micro SD (TF) card needs to be
formatted. You can format it using the
camera (explained in step 6, page 6).
2. Slide in the bracket provided in the box to the camera, stick the 3M adhesive
mount and place the camera on the car's windshield.
(Recommended: locate behind the rear-view mirror to ensure it won’t block
your driving view.)
4
Slide-inSlide-out
3M Sticker

3. Lay the "Car Charger" cable provided in the box between the camera and the
car's cigarette-lighter socket (see suggested diagram).
4. Lay the "Back Camera" cable (see suggested diagram) and plug the back
camera connector into the Dash camera.
5
5. Plug in the “TYPE-C” side to the camera and the Car Charger side to the
car's cigarette lighter socket.
TYPE-C side: Car Charger Side:
A
B
Rear Camera
Front Camera

7. Ready to go.
When the car engine starts, the camera will turn on automatically and start
the video recording. Likewise, the camera will automatically turn off when
the car’s engine is turned off.
D. Press the “MENU” button to leave the menu mode. Then, press the “OK”
button to start recording.
C. Press the “DOWN” button to select
the “OK” option and press the “OK”
button to format it.
6
B. Press the “DOWN” button to select
the “Format” option and press the
“OK” button to confirm.
6. Start the engine, and the dash camera will automatically turn on. Press the
“OK” button to enter the “Standby Mode”.
A. Press the “MENU” button twice to
enter the SETUP list.
>
>
>
>
>
>
Format
All data will be deleted
Cancel
OK
>
>
>
>
>
>
Date/Time
Auto Power Off
Beep Sound
Language
Frequency
Auto Display Off
>
>
>
>
>
>
Format
Default Setting
Version

1. When the car engine starts, the camera automatically turns on and starts the
video recording. Likewise, the camera will automatically turn off when the car’s
engine is turned off.
2. Press the “OK” button to Stop/Start recording.
Helpful Tips:
- You can set the recorder video file duration to 1/3/5 minutes from the settings
menu.
- As a default, when the camera’s “loop recording” is set “on”, it means that once
the memory card is full, the camera will start cycle recording and overwrite the old
file - from old to new (FIFO).
1. Press the “OK” button to stop recording and press the “Mode” button to
switch to the photo mode. The camera icon will appear on the screen’s
upper left corner.
2. Press the “OK” button to take a picture. The icon will flash to indicate a
photo was taken.
1. Press the “OK” button to stop the video recording.
2. Press the “Menu” button twice, choose the “Date / Time” option and press the
“OK” button to enter.
3. Press the “UP” / “DOWN” buttons to adjust the values, press the “MODE” button
to confirm, and press the “OK” button to exit.
Initial Settings
4
Video Recording Mode Operation
5
Photo Mode Operation
6
Set the Date and Time (watermark):
7
1. Press the “OK” button to stop recording and press the “MODE” button to
switch to the playback mode. The photo/video file icon / will appear on the
screen’s upper left corner.
2. Press the “UP”/ “DOWN” buttons to browse between the video/picture files.
3. Press the “OK” button to play the selected video file and press again to pause
the playback.
Playback Mode Operation
7

Menu Settings Operation
8
8
1. Press the “OK” button to stop recording and press the “Menu" button to enter the
“System Settings Menu”.
2. Use the “UP”/ “DOWN” buttons to navigate the menu options.
3. Press the “OK” button to enter a selected option, and use the “UP”/ “DOWN”
buttons to navigate between the settings. Finally, press the “OK” button for
confirmation and press “MENU” to exit.
VGA
Continuous
Shooting
Single shot
Single shot/ 2s/ 5s/ 10s
VGA/1M/2M/3M/5M/8M/10M
Auto/daylight/cloudy/Tungsten/
Fluorescent
Parking
G-sensor
Recording
Date Time
Stamp
HDR
VGA
1920x1080
1280x720
640x480
Off/1/3/5minutes
+3, +2, +1, 0, -1, -2, -3
720P
Audio
Recording
Off/On

9
1. Loop Recording
The camera will keep recording until the storage is full. The camera will overwrite
the earliest recording with new footage when this happens. This feature enables
the camera to record non-stop with limited storage space.
2. G-Sensor
The camera comes with a G-sensor, which detects movement. In the event of a
collision or sudden acceleration/deceleration, the camera will protect the most
recent footage from being overwritten.
Special Features
9
Off/30seconds/1minute/2 minutes
Off/3minutes/5minutes/10minutes
YY/MM/DD
Anti-Shaking
Date/Time
WiFI
Auto Display Off
Factory default: 50Hz
Factory default:
English
Auto Power Off
English, 한국, Français, תירבע,
简体中文，繁体中文，日本语,
Cancel/Ok
Normal/Black and White/Sepia
+3, +2, +1, 0, -1, -2, -3
Normal

3. Motion Detection
When motion detection is on, the camera will automatically record any
movement detected in front of the camera. This feature must be turned off
during regular driving/recording. The primary purpose of motion detection is
video surveillance. When parking your car, power the camera via any USB
power source, and let the camera record any movement in front of it.
4. Battery Charging
The internal battery will automatically charge while a power source is
connected (Whether the camera is on or off). When it’s charging, this icon
will flash. Once the internal battery is fully charged, this icon will be
displayed on the main screen.
10
5. USB mode
When connecting this Road Camera to a PC, it functions as a Mass Storage.
- USB Flash Drive
Allows you to access and download all recorded video files, like a regular
memory stick.
6. Reset
If the camera crashes or recordings become abnormal during use, you can
press the RESET button to reset the camera's operating system.

1. Download the mobile APP: The camera’s App is available on Apple Store and
Google Play. Scan the following QR code to auto-direct to the APP page. You
can also download the APP by searching “ RoadCam”.
5. After connection, go back to the APP. You are now connected to the APP
and can start using the Dashcam.
3. Open your App and click on “CONNECT MY
CAMERA”.
4. The APP will open the phone's WiFi network
page. Choose the network Provision-ISR_XXXX
(the XXXX is unique for each device). Connect to it
(the default password is 12345678).
How to connect to the camera:
10
2. Press the camera's “OK” button to stop recording, then long press the “Menu"
button (two seconds press) to turn the device's WiFi on.
11
Scan for iOS/Android:RoadCam App：

Once successfully connected to the APP, you will see the following window:
The Provision Dashcam APP:
11
Enter the
Dashcam’s Setting
View the pictures,
edit or share them
Stop/Start
recording
Take a picture
View the video files,
edit or share them
12

13
Specifications
12
Front: 150° / Back: 150°
VGA/1M/2M/3M/5M/8M/10M
3.0 inch Super HD IPS Screen
Micro SD (TF) card (Max support 128GB)
Off / 1 minutes / 3 minutes / 5 minutes
MOV H.264
Supported
Supported
SupportedWiFi
Supported
TYPE-C 5V
Power Port
English, 한국, Français, תירבע, 简体中文，繁体中文，日本语