PS FURNITURE WALS Maintenance manual

STEP 1:
Insert plastic bushing into both wheel assemblies.
STEP 2:
Insert plastic bushings into both sides of panel.
STEP 3:
Insert axle into wheel assembly. Ensure axle is
fully inserted into wheel assembly.
STEP 4:
Using an allen wrench, loosely install set screw.
Set screw should align with notch in axle.
*Do not fully tighten set screw until STEP 6.
STEP 5:
Slide axle through panel and into opposite wheel
assembly. Push both wheel assemblies tight
against panel.
STEP 6:
While pushing inward on both wheels, install set
screw into second wheel assembly. Set screw
should align with notch in axle. Give both set
screws a final hand tighten.
1.800.762.0415 | psfurniture.com
WALS™ & WALS-X™ Care & Maintenance

• Attached are the assembly/disassembly instructions.
• Accidental Spills: Spilled liquids should be wiped up immediately with a soft
absorbent cloth.
• Periodic Dusting: Clean with a slightly damp cloth, using another soft cloth to dry.
• Always wipe in the direction of the wood grain. Oil, ammonia and silicon products
should never be used on wood furniture.
• Regularly/Monthly Cleaning: Lightly soiled areas may be cleaned with Guardsman
Wood Cleaner products, following the cleaner’s directions.
• Surfaces should be cleaned with a soft cloth, wiping in same direction as the wood
grain and dried with a soft cloth. Oil, ammonia and silicon products should never be
used on wood furniture.
Cleaning Para Wood Wheels
We do not recommend the use of commercial wax or polish which may leave undesirable residues.
If polishing is desired, use a polish that is silicone free such as Guardsman Wood Polish. Oil,
ammonia and silicon products should never be used on wood furniture.
Polishing Wood Furniture
• Dust should be removed with a vacuum brush attachment.
• Stains should be treated gently with water and mild soap.
Cleaning Bio-Felt
1.800.762.0415 | psfurniture.com
WALS™ & WALS-X™ Care & Maintenance
©PS2019-14347