PSC SECURE EZBR-1W User manual

Revised: 04/03/17
Personal Safety Corporation • Hiawatha, Iowa 52233 • 800.373.2873 • www.PadAlarm.com
ASSEMBLY INSTRUCTIONS
CAUTION: Please inspect all parts carefully for
cracks/breaks prior to use.
1. Assemble underbed
frame parts (A), (B), and
(C) with spring buttons.
For positive assembly,
be sure all spring
buttons pop through the
frame hole and you hear
a “click”. Tighten parts
(B) and (C) together by twisting plastic ring (D).
E
C
2. Insert frames (B) into support rail legs (E).
3. Attach support rail (F) to
underbed frame and support
rail legs.
4. Maximum weight limit: 300 lbs.
Continued
ADJUSTABLE FALL
MANAGEMENT BED RAIL
WITH FLOOR SUPPORT
Model #: EZBR-1W • Made in Taiwan

ADJUSTMENT INSTRUCTIONS
1. To adjust depth of frame to go under mattress:
2. To adjust leg height:
3. To adjust handle height:
STRAP ASSEMBLY
Safety strap provides extra stability, especially
for hospital and twin beds where the
mattresses are lighter and smaller. Strap
is designed to fit all mattress sizes.
1. Insert bed rail under mattress.
2. Go to the
opposite side
of the bed and
lift mattress until
bottom stability bar of bed rail is visible.
3. Place strap around bed rail bottom stability bar and
around bed frame bar directly below. Insert buckle
ends of strap and adjust until strap is secured with a
snug fit.
USER INSTRUCTIONS
Side rails are for the purpose of aiding in turning and
repositioning within the bed and are not intended to be
used for restraint purposes.
CAUTION: Be sure push buttons are aligned
equally. Push buttons must fully protrude through
the adjustment hole to ensure a positive lock.
This product can be used as an aid in balance and
support when getting in and out of the bed. This product
is NOT designed to support the total weight of the user.
CARE INSTRUCTIONS
Periodically check that all push buttons are securely
engaged and tightening rings are tight.
CAUTION: POSSIBLE INJURY. Make sure side rails
are secured properly before use.
RISK OF SERIOUS INJURY. Individuals with
physical limitations who cannot prevent
themselves from rolling or climbing out of the bed
may require other means of safe positioning.
Side rails do not fall within any weight limitations
and may be damaged if excessive pressure is
placed on them.
One Year Limited Warranty
Personal Safety Corporation warrants this product to be
free from factory defects and workmanship for a period
of one year from date of purchase. Void if this product is
misused, abused altered, modified or used for purposes
other than as an adult bed rail. No warranty of use
expressed or implied.
3
2
1
CAUTION! This product is not a restraint. It will not prevent a resident from getting out of their bed.
This product is to be used in conjunction with a total fall prevention program.
ADJUSTABLE FALL
MANAGEMENT BED RAIL
Continued
Revised: 04/03/17
Please see our complete line of Secure
®
fall/wandering prevention & patient safety products
at www.SecureSafetySolutions.com
Highest Quality...Lowest Prices...Guaranteed!
Personal Safety Corporation • Hiawatha, Iowa 52233 • 800.373.2873
Handle Height (from
bottom of mattress) is
adjustable from 19" to
21" to accommodate
thick pillow top
mattresses
Under mattress support section
is adjustable from 43" to 26"
to fit all bed sizes. Included
safety strap provides additional
support and peace of mind
Support leg height
is adjustable from
21" down to 12" to
accommodate low
rise box springs and
bed frames