
2
Document Revision History
Copyright Notice
© Copyright 2007-2011 Performance Technologies, Inc. All Rights Reserved.
The PT logo is a registered trademark of Performance Technologies, Inc.
All product and brand names may be trademarks or registered trademarks of their respective owners.
This document is the sole property of Performance Technologies, Inc.
Errors and Omissions
Although diligent efforts are made to supply accurate technical information to the user, occasionally
errors and omissions occur in manuals of this type. Refer to the Performance Technologies, Inc. web site
to obtain manual revisions or current customer information:
http://www.pt.com.
Performance Technologies, Inc., reserves its right to change product specifications without notice.
Part Number Date Explanation of changes
126p0609.10 April 16, 2008 Initial Production Release
126p0609.11 June 3, 2008 Updated Battery Documentation. Updated LED definitions.
126p0609.12 October 20, 2008 Updated Table 5-1, “PMI/PICMG Command Subset Supported by
the MMC Firmware.” Updated Web references.
126p0609.13 December 16, 2008 Expanded SW2 (now SW1) description.
126p0609.14 March 18, 2009 Added warning and caution about product handling in Chapter 9,
“Agency Approvals” on page 103.
126p0609.15 June 10, 2009 Standardized “Module Management Controller (MMC)” on page 28
and Chapter 5, “System Monitoring and Alarms” on page 53.
Updated “SDRAM” on page 25, “Memory Configuration” on
page 35, “200-pin SDRAM Sockets (P6, P7)” on page 48, “Battery
Socket (BT1)” on page 48, and “Battery Backup Characteristics” on
page 101 to indicate that memory and batteries are not field
servicable items. Changed name of SW2 (now SW1) to
Multifunction Switch. Clarified “SW2-3: Spread Spectrum
Generation” on page 40. Corrected board dimensions on
Page 102.
126p0609.16 October 2, 2009 Standardized Chapter 9, “Agency Approvals” on page 103.
126p0609.17 May 11, 2010 Updated Table 2-4, “SERDES Port Mapping,” on page 27. Added
“Working with the MiniSD Card” on page 35. Updated throughout
for SRIO option. Updated “SW2-2: FCLKA Configuration - PCIe
only” on page 39 to document the new default settings. Removed
“Manual PCI Express Configuration” topic. Updated “Power Reset”
on page 79.
126p0609.18 September 13, 2010 Updated throughout for 1.5 GHz version.
126p0609.19 January 13, 2011 Corrected “DC Operating Characteristics” on page 100 for 1.5 GHz
version.