PulseAudio PASTREAM2 User manual

vanco1.com | 800.626.6445
WIFI STREAMING
RECEIVER
PART NUMBER PASTREAM2
STREAM MUSIC OVER A WIRED OR WIRELESS
INTERNET CONNECTION

2
1. Do not install or place this unit
in a built-in cabinet, or other
confined space without adequate
ventilation.
2. To prevent risk of electrical shock
or fire hazard, due to overheating
do not obstruct unit’s ventilation
openings.
3. Do not install near any source of
heat, including other units that
may produce heat.
4. Do not place unit near flames.
5. Only clean unit with a dry cloth.
6. Unplug unit during lightning
storms or when not used for an
extended period of time.
7. Protect the power cord from being
walked on or pinched, particularly
at the plugs.
8. Use unit only with accessories
specified by the manufacturer.
9. Refer all servicing to qualified
personnel.
WARNING
THIS PRODUCT IS 100% INSPECTED AND TESTED IN THE
UNITED STATES TO VERIFY PERFORMANCE PARAMETERS.
Thank you for purchasing this product. For optimum
performance and safety, please read these instructions
carefully before connecting, operating or adjusting this
product. Please keep this manual for future reference.
DEAR CUSTOMER

3
The PulseAudio PASTREAM2 is an analog and digital audio streamer that allows
amplifiers and distributed audio systems to stream music over a wired or wireless
internet connection. A great solution to stream music to any audio device, or create
a wireless distributed audio system, all with an easy to use and intuitive app! Play and
control music, downloaded or streamed from your phone, tablet, or computer. The
PASTREAM2 is compatible with Airplay, and WiFi Direct (Miracast) devices that are
found within the same network, allowing for songs to be shared easily in a distributed
audio system. In addition, the PulseAudio Streaming mobile app is available on the
iOS and Google Play App Stores, and allows the end user to sync their Spotify, Qplay,
TuneIn, iHeartRadio, Amazon Music, and Tidal accounts for an eortless and enhanced
listening experience. Multiple PASTREAM, PASTREAM2, and PA230SWA devices (sold
separately) can be managed within the same system using the PulseAudio Streaming
app, allowing everyone to listen to their own music and playlists, or be combined for
party mode!
WIFI STREAMING RECEIVER
Part # PASTREAM2
FEATURES
PACKAGE CONTENTS
• PASTREAM2 WiFi Streaming Receiver
• 3.5mm audio cable
• USB A to Micro USB Cable
• USB Power Adapter (5V, 1A)
• Product Manual
• Allows amplifiers and distributed audio systems to stream music over a
wired or wireless internet connection
• A great solution for streaming music to any audio device, or creating a
wireless distributed audio system
• Stream music directly or through a connected network
• PulseAudio Streaming mobile control app available on iOS and Android
App Stores compatible with Airplay and WiFi Direct (Miracast) devices
that are found within the same network, allowing for songs to be shared
easily in a distributed audio system
• Allows user to sync their Spotify, Qplay, TuneIn, iHeartRadio, Amazon
Music and Tidal accounts for an eortless and enhanced listening
experience
• Multiple PASTREAM devices such as the PASTREAM2 and PA230SWA
(sold separately) can be managed within the same system allowing
everyone to listen to their own music and playlists or combine into a party
mode
• Works well with distributed audio systems
• Dimensions: 4.6” x 3.4” x 1” (118mm x 87mm x 25mm)

4
PANEL DESCRIPTIONS
6
5
4
321
1. SPDIF Optical Audio Input: Connect a digital optical audio source
2. 3.5mm Stereo Audio Input: Connect to an analog audio source
3. 3.5mm Stereo Audio Output: Connect to an amplifier, A/V receiver,
distributed audio system, etc.
4. Indicator Link Status Light:
a. No Light: Unit powered o or connected to line in input
b. Blue flashing: Startup mode, searching for network
c. Green flashing: In the process of connecting to internet
d. Solid Green: Connected to internet and ready for use
5. Power (Micro USB): Connect included USB cable and power adapter
6. Ethernet connection: Connect to network for hardwired connection
7. WPS Button for wireless connectivity: Press to activate WPS, long press
for factory reset
7

5
CONNECT AND OPERATE
The PASTREAM2 Receiver is a device that receives internet streaming music
or other wireless music from any wifi enabled device. Multiple PASTREAM
devices such as the PASTREAM2 and PA230SWA (sold separately) receivers
can be used in a single distributed audio system to create multiple streaming
sources.
1. Connect the output of the PASTREAM2 to an amplifier, A/V receiver,
distributed audio system, etc. (output) using the 3.5mm stereo jacks
2. OPTIONAL: Connect a source (input) to either the 3.5mm stereo input or
the SPDIF optical input of the PASTREAM2 for wired audio connection, if
utilizing wireless streaming, connection to this input is not necessary
3. Connect the provided USB cable and power adapter to power up the unit
4. Connect a mobile device that will be the audio source to the local WiFi
network
5. Connect the PASTREAM2 to the same WiFi network
6. Download the PASTREAM APP from the Google Play or Apple
Marketplace, follow the steps for connection provided by the instructions
within the app.
NOTE: The PASTREAM2 can only be utilized on a 2.4GHz network, a 5GHz
connection will not work
To play music:
• From an iOS device, open Airplay to choose the PASTREAM2 as a receiver.
• From an Android device, choose the PASTREAM2 and audio will be streamed to the
receiver
• Connection and stream can also be done with the PASTREAM app
Input
Smart Phone
Tablet
Amplifier
Speakers
Laptop
Output

6
SAFETY AND NOTICE
The PASTREAM2 has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic
equipment, the PASTREAM2 should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage
to the unit.
LIMITED WARRANTY
With the exceptions noted in the next paragraph, Vanco warrants to the
original purchaser that the equipment it manufactures or sells will be free from
defects in materials and workmanship for a period of two years from the date
of purchase. Should this product, in Vanco’s opinion, prove defective within
this warranty period, Vanco, at its option, will repair or replace this product
without charge. Any defective parts replaced become the property of Vanco.
This warranty does not apply to those products which have been damaged
due to accident, unauthorized alterations, improper repair, modifications,
inadequate maintenance and care, or use in any manner for which the product
was not originally intended. Items integrated into Vanco products that are
made by other manufacturers, notably computer hard drives and liquid
crystal display panels, are limited to the term of the warranty oered by the
respective manufacturers. Such specific warranties are available upon request
to Vanco. A surge protector, power conditioner unit, or an uninterruptible
power supply must be installed in the electrical circuit to protect against
power surges. If repairs are needed during the warranty period the purchaser
will be required to provide a sales receipt/sales invoice or other acceptable
proof of purchase to the seller of this equipment. The seller will then contact
Vanco regarding warranty repair or replacement.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning

7
TECHNICAL SUPPORT
In case of problems, please contact Vanco Technical Support by dialing
1-800-626-6445. You can also email technical support issues to techsupport@
vanco1.com. When calling, please have the Model Number, Serial Number
(axed to the bottom of the unit) and Invoice available for reference during
the call. Please read this Instruction Manual prior to calling or installing this
unit, since it will familiarize you with the capabilities of this product and its
proper installation. All active electronic products are 100% inspected and
tested to insure highest product quality and trouble-free installation and
operation. The testing process utilizes the types of high-definition sources and
displays typically installed for entertainment and home theatre applications.
For additional information please visit www.vanco1.com.
LIABILITY STATEMENT
Every eort has been made to ensure that this product is free of defects. The
manufacturer of this product cannot be held liable for the use of this hardware
or any direct or indirect consequential damages arising from its use. It is
the responsibility of the user and installer of the hardware to check that it is
suitable for their requirements and that it is installed correctly. All rights are
reserved. No parts of this manual may be reproduced or transmitted by any
form or means electronic or mechanical, including photocopying, recording
or by any information storage or retrieval system without the written consent
of the publisher. Manufacturer reserves the right to revise any of its hardware
and software following its policy to modify and/or improve its products where
necessary or desirable. This statement does not aect the legal rights of the
user in any way.

506 Kingsland Drive Batavia, Illinois 60510
call: 800.626.6445 | fax: [phone]
visit: www.vanco1.com
Vanco®International
Introducing a new brand from Learn more at pulseaudio1.com