PumpSpy Smart Outlet Manual
Setting up your PumpSpy Sump Pump Smart Outlet is
very easy and only takes a few minutes.You should setup your outlet
at a convenient location in your home and move it to your sump
pump later. Don’t worry, the Smart Outlet will remember your
settings when you unplug it.
STEP 1: Download and Install the PumpSpy App from
the App Store.
STEP 2: Open the app and create a new PumpSpy Account.
• After entering your info, press Done.
• Press the home button on your Apple device.
STEP 3: Plug in the PumpSpy Smart Outlet.
• Plug the Smart Outlet into any AC outlet.
• The LED ring will light up and turn yellow (setup mode).
• If the LED ring is not yellow, gently press and hold the button with the
PumpSpy logo. The unit will turn yellow/enter setup mode after 3 seconds.
STEP 4: Connect to the PumpSpy Smart Outlet
• On your Apple device, open Settings.
• Select WiFi.
• Select the WiFi network named “PumpSpy.”
• Press the home button on your Apple device.
STEP 5: Setup the PumpSpy Smart Outlet
• Open the PumpSpy app.
• The PumpSpy app will ask your permission to send you notications. Click OK.
• Select your WiFi network from the list of available networks.
• Enter the password for the selected WiFi network and press Done.
• The LED ring will turn green. A Green ring means the outlet is connected to
PumpSpy and is ready for use.
• A Success message will be displayed once connected. Press OK.
• Continue the setup process on the app by entering the location
of the Smart Outlet.
STEP 6: Enter Alert Contacts
• On the PumpSpy App, select Contacts.
• Following the onscreen prompts, enter cell phone numbers and/or email
addresses that should receive PumpSpy alerts.
STEP 7: ConnectYour Sump Pump to the Smart Outlet
(Refer to Owner’s Manual)
STEP 8: Install the High Water Sensor (Refer to Owner’s Manual)
SMART OUTLET SETUP INSTRUCTIONS WATCHING YOUR SUMP PUMP SYSTEM 24/7
1. 2.
3. 4.
5.
7. 8.
6.
PumpSpy
RED LED
Cannot connect to Internet,
or High Water Alarm
Setting up your PumpSpy Sump Pump Smart Outlet
is very easy and only takes a few minutes.You should setup your
outlet at a convenient location in your home and move it to your
sump pump later. Don’t worry, the Smart Outlet will remember
your settings when you unplug it.
STEP 1: Download and Install the PumpSpy App
from Google Play.
STEP 2: Open the app and create a new PumpSpy Account.
• After entering your info, press Done.
• Press the home button on your Android device.
STEP 3: Plug in the PumpSpy Smart Outlet.
• Plug the Smart Outlet into any AC outlet.
• The LED ring will light up and turn yellow (setup mode).
• If the LED ring is not yellow, gently press and hold the button with the
PumpSpy logo. The unit will turn yellow/enter setup mode after 3 seconds.
STEP 4: Connect to the PumpSpy Smart Outlet
• On your Android device, open Device Settings.
• Select WiFi.
• Connect to the WiFi network named “PumpSpy.”
• Press the home button on your Android device.
STEP 5: Setup the PumpSpy Smart Outlet
• Open the PumpSpy app.
• Select your WiFi network from the list of available networks.
• Enter the password for the selected WiFi network.
• The LED ring will turn green.A Green ring means the outlet is connected
to PumpSpy and is ready for use.
• A Success message will be displayed. Press OK.
• Continue the setup process on the app by entering the
location of the Smart Outlet.
STEP 6: Enter Alert Contacts
• On the PumpSpy App, select Contacts.
• Following the onscreen prompts, enter cell phone numbers and/or email
addresses that should receive PumpSpy alerts.
STEP 7: ConnectYour Sump Pump to the Smart Outlet
(Refer to Owner’s Manual)
STEP 8: Install the High Water Sensor (Refer to Owner’s Manual)
1. 2.
3.
5.
7. 8.
6.
PumpSpy
WATCHING YOUR SUMP PUMP SYSTEM 24/7
4.
SMART OUTLET SETUP INSTRUCTIONS
RED LED
Cannot connect to Internet,
or High Water Alarm
ADD DEVICE MANUALLY
If you are having issues with setting up your PumpSpy
device via the app, you can manually setup the device.
This process works on all Apple and Android devices.
• On your Apple/Android device, go to Wi-Fi
settings and connect to the PumpSpy device’s
Wi-Fi network
• If your device warns you that there is no internet
connection available, that is normal. Stay
connected to the PumpSpy Wi-Fi network.
• Some Android devices will request that you sign in
to the PumpSpy network. In this event, click the
sign in notication. When you reach the PumpSpy
Provisioning page, select options (3 dots) at upper
right, then select “Use this network as is”.
• Once successfully connected, open a web browser
on your Apple/Android device
• Enter the following address:
10.10.115.1/cong/scan_page_outer.html
• Select your Wi-Fi network from the displayed
list of available networks
• Enter your network password
• The screen will go dark and a message will
be displayed. Close your browser.
• Your PumpSpy devices Wi-Fi indicator will turn red
for several seconds, then green once successfully
connected to PumpSpy’s servers. If it stays red after
60 seconds, start over. (Make sure you enter the
correct Wi-Fi password!)
• Once the Wi-Fi indicator is green, open the
PumpSpy app and select “Connect Device Manually”
• Enter your PumpSpy device’s 15-digit serial number
and press “Submit”
MANUAL SETUP INSTRUCTIONS WATCHING YOUR SUMP PUMP SYSTEM 24/7
