Puqpress Q1 User manual

Coee gets everywhere. One day a week, spend 5 minutes
cleaning to prevent Puq from gaining weight it doesn’t need.
1. Press “Cleaning”. 2. Remove top cover
and get the Allen key.
3. Unscrew by turning
counter-clockwise.
4. Remove bolt 5. Remove tamper base by
turning counter-clockwise.
6. Clean cavity with a brush.

WARNING:
Failure to adjust the lower clamp to optimum working position may allow
contact with moving parts. Portafilter should not wiggle
For instruction video check www.puqpress.com/support
1. Insert power cable and turn on
PUQpress. The tamper base will
move to the upper position.
2. Remove the power cable.
3. Remove the top cover. 4. Turn Puq upside down on the table
and unscrew the lower clamp.
5. Push Portafilter (PF) in-between
the upper- and lower clamp.
Push lower clamp downward and
tighten the screws.
6. Check fitting and tighten screws
firmly.
7. Put Puq back on its feet and
test if the PF fits well.
Cleaning during your shift
Coffee can stick to your tamper while making
coffees. Give it a quick wipe with a dry towel or
cloth and you’re good to go again!