PureLink EZ-H User manual

EZ-H Owner’s Manual
Integrated HDMI over Fiber Optic Cable
PureLinkTM
535 East Crescent Avenue
Ramsey, NJ 07446
USA
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.purelinkav.com
For order support, please contact your local dealer.
For technical support, please contact us at [e-mail]

PureLink by Dtrovision
2
TABLE OF CONTENTS
Chapter 1. Product Overview
1.1 Safety Precautions --------------------------------------------------------------- 3
1.2 Product Description --------------------------------------------------------------- 4
1.3 Product Features --------------------------------------------------------------- 4
1.4 What’s in the Box --------------------------------------------------------------- 5
1.5 Installation Guidelines --------------------------------------------------------------- 6
Chapter 2. Product Specifications
2.1 EZ-H Specification --------------------------------------------------------------- 7
2.2 HDMI Receptacle Pin Assignment -------------------------------------------------- 8
2.3 Troubleshooting --------------------------------------------------------------- 8
2.4 Maintenance --------------------------------------------------------------- 9
Chapter 3. Additional Information
3.1 Manufacturer’s Warranty (2-Year) ------------------------------------------------- 10
3.2 Customer Service ------------------------------------------------------------------- 10

PureLink by Dtrovision
3
Chapter 1. Product Overview
1.1 Safety Precautions
 All safety instructions should be read and understood before the unit is operated.
 The owner’s manual and safety instructions should be retained for future reference.
 Unplug this unit from the AV devices before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth only.
 Keep away from wet, magnetic, and flammable surfaces or substances.
 Do not place any heavy objects or equipment on top of the unit.
If you experience any malfunctioning of product or have any question as to operation of the
product, please contact our customer service center.
PureLinkTM
Tel: [phone]
Email: [e-mail]

PureLink by Dtrovision
4
Welcome!
Congratulations on your purchase of the PureLink EZ-H Integrated HDMI over Fiber Optic Cable.
This manual contains information that will assist you in installing and operating the product.
1.2 Product Description
The TOTALWIRE™ EZ-H offers the easiest install solution for HDMI, supporting resolutions up to 4K / Ultra
HD over long cable runs (up to 100 meters) without the need for an external power supply or additional
extenders. With its ultra thin, flexible cable and small connector, the EZ-H delivers ultimate reliability and
convenience.
Smaller is Better
With its ultra thin, flexible cable (3mm jacket diameter) and small connector, the EZ-H can easily be pulled
through conduits and sustain difficult turns for quick, versatile installations. The EZ-H Integrated Optical HDMI
Cables support all PC and HDTV resolutions up to 4K/Ultra HD with 36 bit Deep Color and HDCP compliance
at a distance of up to 100 meters.
All the Advantages, None of the Hassle
PureLink’s TOTALWIRE EZ-H fiber cables are completely self-powered and available in pre-terminated lengths
with both plenum and UL riser sleeves. The EZ-H can simply be used as a regular HDMI cable for powerful,
long-distance extension without the need for additional extenders, equalizers, or power supplies.
The EZ-H delivers ultimate reliability and convenience for an EZ-In, EZ-Out fiber transport solution.
1.3 Product Features
 Supports all PC and HDTV resolutions up to 4K / Ultra HD
 3D Support with 36-bit Deep Color
 Pre-terminated lengths up to 100 meters (328 ft.)
 Incorporates active transceivers inside connectors
 Plug-n-play (no additional power supply required)
 HDCP Compliant
 Plenum-rated cable
 Immune from EMI and RFI
 No signal loss
Common Application
 Digital Home Theater

PureLink by Dtrovision
5
 Conference Room AV System
 Medical Display System
 Data Center
 Digital Signage
1.4 What’s in the Box
 EZ-H series HDMI Fiber Optic Cable : One (1) unit
 User’s Manual
Figure 1 – EZ-H Series HDMI over Fiber Optic Cable
 Hardware requirements
 You have to have a video source that has HDMI output port such as PC, media player, portable
devices with appropriate adapter/converter. It should support the maximum graphic resolution
feature of displays to be connected.
 No special requirements memory size, CPU speed and chipsets, if you’ve already properly
installed your HDMI graphic controllers or cards.
 Software requirements
 No requirements.

PureLink by Dtrovision
6
1.5 Installation
Important : Please use the installation procedure below. Improper or no operation may result if the
start up sequence is not correctly followed.
1. Carefully unpack the contents of the shipping group
2. Turn off the entire system before connecting
3. Plug directly the Tx (Video Source) connector of EZ-H cable in the HDMI output port of your video
source. Make sure cable is firmly inserted.
4. Plug the Rx (Display) connector of EZ-H cable to the HDMI input port of display (HDTV, Plasma screen,
Projector, etc). Make sure cable is firmly inserted.
5. Turn power on the source and the display

PureLink by Dtrovision
7
Chapter 2. Product Specifications
2.1 EZ-H Specification
Item
Description
Model
EZ-H
Input type
HDMI, 1 port
Output type
HDMI, 1 port
Graphic Resolution
VGA / SVGA / XGA / UXGA / WUXGA
480i/p , 720i/p , 1080i/p, 4K/UHD (3840x2160)
Available Cable Length
EZ-H-010 : 33 ft (10 m)
EZ-H-020 : 66 ft (20 m)
EZ-H-030 : 100 ft (30 m)
EZ-H-040 : 133 ft (40 m)
EZ-H-050 : 165 ft (50 m)
EZ-H-070 : 231 ft (70 m)
EZ-H-100 : 330 ft (100 m)
Audio
Up to PCM 8 channel, Dolby Digital TrueHD, and
DTS-HD Master Audio
Cable Jacket Material
Plenum Rated PVC
Cable Inner-jacket Material
Plastic Optical Fiber and Copper
Cable Diameter
0.12’’ (3 mm)
Bend Radius
0.2’’ (5 mm) minium
Pull weight
22 lbs (10 kg)
Compliance
HDMI, HDCP, CEC
Operating Temperature
32° - 122° F (0°–50°C)
Operating Humidity
5% - 85% RH
Power
5V via HDMI pin # 18
Power Consumption
0.07 watts

PureLink by Dtrovision
8
2.2 HDMI Receptacle Pin Assignment
HDMI Connector Pin Assignment
Pin No.
Signal Name
Pin No.
Signal Name
1
TMDS DATA 2+
11
TMDS Clock Shield
2
TMDS DATA Shield
12
TMDS Clock -
3
TMDS DATA 2-
13
CEC
4
TMDS DATA 1+
14
Reserved (HDMI 1.0–1.3c)
5
TMDS DATA Shield
15
SCL (I²C Serial Clock for DDC)
6
TMDS DATA 1-
16
SDA (I²C Serial Data Line for DDC)
7
TMDS DATA 01+
17
DDC/CEC/HEC Ground
8
TMDS DATA Shield
18
+5 V (max 50 mA)
9
TMDS DATA 0-
19
Hot Plug detect (all versions)
10
TMDS Clock +
20
2.3 Troubleshooting
The display shows only black screen.
- Ensure that the HDMI ports are firmly plugged in to the source and display.
- Ensure that the Video source (Tx) is connected to the video source and Display (Rx) is connected to the
display.
- Check if the source and display are powered on and properly booted.
- Re-boot up the system while connecting the optical HDMI extension module.
Screen is distorted or displays noises.
- Check if the graphic resolution is properly set for the sources. For PCs, go to the display properties of
Windows and tap the settings. For other AV video source, refer to the owner’s manual to adjust video
resolution.
- Reboot the system. Disconnect the optical HDMI cables if necessary.

PureLink by Dtrovision
9
2.4 Maintenance
No special maintenance is required for the EZ-H HDMI over Fiber Optic Cable. Ensure that the
EZ-H unit is stored or used in a benign environment free from liquid or dirt contamination. There are no user
serviceable parts. Refer all service and repair issues to PureLink.

PureLink by Dtrovision
10
Chapter 3. Additional Information
3.1 Manufacturer’s Warranty (2-Year)
PureLink warrants this EZ-H HDMI over Fiber Optic Cable to be free from defects in workmanship and
materials, under normal use and service, for a period of two (2) year from the date of purchase from
PureLink or its authorized resellers.
If the product does not operate as warranted during the applicable warranty period, PureLink shall, at its
option and expense, execute one of the following as necessary:
1. Repair the defective product or part
2. Deliver to customer and equivalent product or part to replace the defective item
3. Refund to customer the purchase price paid for the defective product
All products that are replaced become the property of PureLink. Replacement products may be new or
reconditioned. Repaired or replacement products or parts come with a 90-day warranty or the remainder of
the warranty period. PureLink shall not be responsible for any software, firmware, information, or memory
data loss of contained in, stored on, or integrated with any products returned to PureLink for repair under
warranty.
3.2 Customer Service
Any customer service inquiries can be submitted electronically through the Q&A form on our website
( www.purelinkav.com ).
For immediate assistance please contact us at [phone] to reach our customer care or tech support
team.