Pureway ECO II Installation instructions

PureWay Compliance, Inc.
20501 Katy Freeway Suite 206
Katy, TX 77450
877.765.3030
www.PureWay.com
ECO II
AMALGAM
SEPARATOR
EQUIPMENT LOGBOOK
ASSEMBLY, OPERATION
AND MAINTENANCE

2
PureWay
• To be filled in by the technician, or the person maintaining the seperator
• Service and maintenance must be carried out as per the instructions for the installation,
operation and maintenance
Equipment Log Book
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 1
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 2
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 3
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 4
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 5
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 6
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 7
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 8
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 9
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 10
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 11
Name of the person
who inspected:
Date of Inspection: — —
Was the system operating properly? Yes No
Was the system needing to be replaced? Yes No
MONTH 12

3
PureWay
Index
ECO II
AMALGAM
SEPARATOR SECTION PAGE
Index 3
Technical Data 4
Explanation of how the system works 4
ECO II Application and explanation
of the type plate 5
ECO II Assembly Instructions 6
ECO II Installation Guide 8
ECO II Tandem 10
Maintenance and Replacing the
collection container 11
Disposal of the full collection container 13
Contact Us 14

4
PureWay
ECO II Application and
Explanation of Components
Explanation of how
the system works
The amalgam separator ECO II works on
the principle of sedimentation, divided into
several sections.
With dry vacuum systems the waste water
from the dental units runs from the air/water
separation tank into the inlet nozzle 3.1 of
the ECO II.
In wet ring systems, the water flows from the
suction line into the inlet nozzle.
From there the waste water is led
through the first large sedimentation
chamber 3.2. Afterwards it is led through
the first sedimentation cartridge 3.3,
through cascades 3.4 and the second
sedimentation cartridge 3.5 into the second
sedimentation chamber 3.6. Through the
third sedimentation cartridge 3.7 the cleaned
water is led directly into the sewage pipe 3.8.
In wet ring systems, the clean water is led
into the wet ring pump.
Technical Data
Low pressure range 50mbar - 300mbar
Separation rate > 99% in accordance with ISO 11143
Collection container volume 0.4 gal (1.5 liters), 4.5 lb (ca. 2 kg), > 0.18 gal (700 ml) amalgam waste
Max. ambient temprerature 104° F
Possible vacuum systems wet or dry
Max. airflow rate 400 gal/min, 1,514 l/min
Max. water flow rate 0.264 gal/min, 1 l/min
Dimensions (HxWxD) 12.2 x 7.7 x 8.4 in (309 x196 x 213 mm)
Eschange interval approx 12 months

5
PureWay
Application
The Economy System Type II (ECO II) is a sedimentation
amalgam separator.
When used in a wet ring system, the ECO II can be installed in
the vacuum line before the wet ring pump.
Possible Vacuum Systems
• dry vacuum system with air/water seperation
• wet ring systems
The type plate is located directly on the
front side of the amalgam separator.
The type plate is located directly on the front side
of the amalgam separator.
2.1 Equipment type
2.2 Serial number
2.3 Manufacturer’s address
2.4 Distributor’s address
2.5 Max. suction volume
2.6 Max. water flow rate
Type Plate
2.5 2.6 2.1 2.2
2.3 2.4

6
PureWay
ECO II Assembly Instructions
STEP 1
• 2 x black foundation brackets
• 1 ECO II Canister filtration system (blue top, clear cylinder)
• 6 Screws & nuts
• 2 x right angle 3/4” fittings
• 2 x 3/4” straight fittings
• 2 x 1” straight fittings
• 2 x 1.5” straight fittings
• 2 x adaptors
• 8 x black 0-rings
• 2 x grey U-clips to secure fittings onto the ECO II
• Two stainless steel cylinders
Remove all contents from the ECO II. Each system comes with the following components
Secure the black foundation brackets by placing bracket 1 on top of bracket two as shown
below ensuring the brackets fit securely into the alignment grooves.
Bracket # 1 Bracket # 2 Bracket #1 placed on top
of bracket #2
The ECO II Amalgam Separator requires minor assembly before ready to install to a dental vacuum
system. Follow the instructions below to assemble your ECO II and then proceed to install instructions.
STEP 2

7
PureWay
Place the hexagonal fastening nuts inside the brackets in the secure area below and
secure with the screws provided as shown below. There are 4 secure points on the back
of the brackets and 2 on the front.
Fit the stainless-steel cylinders onto the two-canister base support as shown in the
illustration below. Then fit the ECO II canister on top of the base support cylinders and
then secure with the small screws.
Identify the appropriate fittings you plan on using during installation and fit the O-rings
on to the applicable fittings as shown below. You are now ready to start the installation.
STEP 3
STEP 4
STEP 5

8
PureWay
STEP 1STEP 2
The ECO II allows a variety of different installation options. Please check if there is a wet ring / water
ring vacuum system, or a dry vacuum system.
Installation in the suction line before
a wet ring pump
In wet ring systems, the ECO II and the ECO II
Tandem are installed in the vacuum line before
the wet ring pump.
If you would like your ECO II to be mounted on a wall you must request these wall mounts at
877.765.3030 or go to www.PureWay.com contact page and request.
Optional Wall Bracket Installation
Installation Options of ECO II
The stainless steel wall mounts
are affixed to a wall using
screws provided.
Stainless steel rectangular wall mounts
are affixed on the back of the foundation
brackets using existing screws.

In order to guarantee a trouble-free connection of
different sizes of hoses, hose adapters supplied along
with the device must be inserted in the inlet and outlet
openings. In any case ensure that all connections are
properly secured!
The waste water must be able to drain freely into the
sewage pipe!
10.1 Waste water inlet: waste water from the dental unit
or from air water seperator
10.2 Waste water outlet: cleaned waste water directly
to the sewage pipe
Filling level
As soon as the solid content of the collection
container has reached the maximum flling level,
the ECO II must be replaced. However it has to be
replaced at least once a year even if the maximum
flling level has not yet been reached.
Installation with a dry
vacuum system
The ECO II / ECO II Tandem can be
installed before (option 1) or after
(option 2) the air/water separation
tank (waste water outlet).
Replacement Intervals
Installation of ECO II
9
PureWay

ECO II Tandem Installation Instructions
IN
In order to connect the ECO
II in tandem configuration,
take two ECO II systems
and connect them using a
Y-Connector as shown in the
illustrations below.
10
PureWay
STEP 1
STEP 3
STEP 2
OUT
IN

11
PureWay
STEP 1STEP 2
STEP 3STEP 4
3.1
Wear protective gloves and face mask! Avoid contact with the
contents of the amalgam separator!
It is not possible to open the ECO II and reuse it! Every attempt to
open the amalgam separator results in the malfunction of the device.
Moreover, the required separation rate will no longer be achieved!
The ECO II collection container must be exchanged according to the replacement intervals as defined
in the replacement interval table (cf. page 8, chapter 6).
Remove the adapter
with the tube at the
waste water inlet and
waste water outlet.
Detach the screws
from the bolts 3.1 and
take out
the full amalgam
separator by lifting it
off upwards.
Tightly close the
outlet of the full ECO
II with the sealing plug
(supplied with the
amalgam separator).
Position the full amalgam
separator horizontally
onto an even surface,
make sure that the inlet
opening is pointing
upwards!
Cut open the sanitizing
pouch (supplied with
new amalgam separator)
at one corner and pour
its content into the
inlet opening of the full
amalgam separator.
Maintenance and Replacing
the Collection Container

12
PureWay
STEP 5STEP 6
STEP 7STEP 8
12
Check inlet and outlet of the ECO II for tightness!
Suck in a large quantity of water (at least 0.5 gal or 2 l) to check
the system for leakages. If leakages are found, check the hose
connections.
Install the new
amalgam separator
and secure it with the
bolts and screws.
Reconnect the
adapter with the tube
to the “IN” and “OUT”
openings.
Put the amalgam separator into
the plastic liner (supplied with the
new amalgam separator), place it
into the styrofoam shells and then
into the carboard box.
Afterwards also tightly
close the inlet opening
with the sealing plug.

13
PureWay
For technical and hygienic reasons the collection container is designed for single use. The reuse of a
used container can lead to malfunction and violates the warranty regulations!
The recycling of the full amalgam
separator will be handled by a certified
mercury recycling.
The prepaid return label will ship your canister
to our recycling facility and you will receive a
certificate of recycling as soon as it is ready.
To sign up for e-certificates please visit
www.pureway.com
Certificates of recycling need to be stored
according to national law.
For installation and replacement how to
videos, please visit
www.pureway.com/ecoii-amalgam-separator
Need assistance installing your ECO II? Call
877.765.3030 and PureWay can assist you in
finding a qualified technician to install your system!
To access your e-certificates online and to sign up
to receive your e-certificates via e-mail,
please visit www.PureWay.com
Wear protective gloves and face mask!
Avoid contact with the contents of the container!
Disposal of the full collection container
Put the amalgam
separator and the
styrofoam shells into
the box and close it.
Place the properly sealed amalgam
separator into the plastic liner and then
into the two styrofoam shells.
Find the prepaid return UPS
shipping label inside the
box, and place the label on
top of the box. You are now
ready to return your system.
Please give the box to your
regular UPS carrier or you
can contact PureWay to
schedule a free pickup by
calling 877.765.3030 or
e-mailing us at support@
pureway.com
STEP 1
STEP 2
STEP 3

ECO II
AMALGAM
SEPARATOR
Contact Us
PureWay Compliance, Inc.
20501 Katy Freeway Suite 206
Katy, TX 77450
877.765.3030
www.PureWay.com