Purtek PT3802 User manual

Big Button Emergency Phone
with Remote Pedant
PT3802
Thank you for purchasing your Remote Dialing/Answering
Big Button Phone. Combining a speakerphone and a Caller
ID unit in one system, your phone can display available call
information. This telephone is hearing aid compatible.
Telephone
Remote Pendant
7 feet Long Phone Cord
7 inch Short Phone Cord
Coiled Cord
AC Adapter
Wall Mounting Bracket
User’s Guide
What’s Included
www.leiproducts.com
PT3802-OM-EN.indd 1 04/08/2008 11:53:15 AM

2
Important Safety Instructions ............................................................................. 3
Controls ..................................................................................................................... 4
Preparing Your Phone ........................................................................................... 6
Mounting the Phone .............................................................................................. 6
Installing Batteries ................................................................................................. 7
In the Phone ......................................................................................................................7
In the Pendant ..................................................................................................................7
Battery Notes ....................................................................................................................7
Setting Your Phone ................................................................................................ 8
Setting the Remote Pendant ......................................................................................8
Making calls ............................................................................................................. 9
Caller ID .................................................................................................................... 9
Call Back from the Caller ID Memory .....................................................................10
Saving Caller ID Numbers ...........................................................................................10
Deleting Caller ID Records .........................................................................................10
Memory .................................................................................................................... 10
Storing Numbers in Memory Locations ................................................................10
Storing Numbers in the Phone Book .....................................................................10
Deleting Numbers in the PhoneBook .................................................................... 11
Recording Name ............................................................................................................. 11
Dialing a Memory Number .......................................................................................... 11
Recording a Message for Emergency Calls .........................................................12
Checking Your Emergency Message ......................................................................12
Using the Emergency Call ..........................................................................................12
Cautions ................................................................................................................... 13
Industry Canada Statement (CS03) ................................................................. 14
Industry Canada Statement (RSS 210) ............................................................ 15
Limited One-year Warranty ................................................................................ 16
Contents
PT3802-OM-EN.indd 2 04/08/2008 11:53:15 AM

3
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
1. Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightening.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with local
codes for possible special disposal instructions.
Save these instructions!
Important Safety Instructions
PT3802-OM-EN.indd 3 04/08/2008 11:53:15 AM

4
Controls
CALL BACK/OK
Press to confirm phone functions
or automatically dial the selected
caller ID record or phonebook
number.
DELETE
To delete selected
number/name/option.
SOS
Hold down to activate or
deactivate emergency call.
MI & M2
Store 2 numbers and dial with one
touch of a button.
UP/DOWN
Scroll up or down to select option.
PHONE/CID
Switch between phone book and
Caller ID when in standby mode.
FLASH
Press to produce a switchhook
signal for special services or to
disconnect the current call.
REDIAL/PAUSE
Press to view the last dialed
number, press REDIAL/
PAUSE or SPKPHONE or
pick up the handset to dial
the number. When on a call,
press to pause for about 4
seconds.
MENU
To select
options.
PT3802-OM-EN.indd 4 04/08/2008 11:53:16 AM

BOOSTER
LED lights when BOOSTER is activated.
Adjust BOOSTER/VOLUME for the desired
volume. Press BOOSTER again to deactivate.
This function is for the handset only.
5
Controls
SPKPHONE
Press to switch between the
handset and speakerphone, or
to make, answer or end call.
RINGER LO MID HI
Set the ringer volume: LO/MID/HI.
TONE
Slide to adjust the tone volume for the
handset when BOOSTER is activated.
VOLUME
Slide to adjust the speaker volume.
Hold down to activate or deactivate emergency call.
LED lights when the red button is pressed.
You can also press the red button to answer or end
a call in speakerphone mode.
PT3802-OM-EN.indd 5 04/08/2008 11:53:16 AM

6
Preparing Your Phone
1. Peel the plastic label from your phone’s display before using your
phone.
2. Connect the supplied AC adapter to the DC 9 V 200 mA jack and a
standard AC outlet.
3. Plug one end of the supplied modular cord into the TEL. LlNE jack
(RJ11) on the back of the phone. Plug the other end into a modular
phone line jack.
4. Plug one end of the supplied coiled cord into the jack on the left side
of the phone. Plug the other end into the modular jack on the handset.
Mounting the Phone
You can place your phone on a flat surface or mount it on a telephone
wall plate (not included). To mount it on the wall:
1. Connect one end of the short phone
cord to the telephone wall plate and
the other the telephone.
2. Insert the supplied mounting bracket
into the slots on the back of the
phone and push the bracket up until
it clicks. To detach the bracket, press
the tab and slide down the bracket.
3. Insert the two keyhole slots on the
phone with the wall plate and slide
the phone down, being careful not
to pinch the telephone line.
4. Slide out the tab in the phone’s cradle and
rotate the tab 180 degrees. Then insert it
back to hold the phone in the cradle.
DC 9 V jack
TEL LINE jack
Mounting
bracket
Wall plate
Tab
Tab
PT3802-OM-EN.indd 6 04/08/2008 11:53:16 AM

7
In the Phone
(Optional) Insert 4 AA alkaline batteries (not supplied) in the battery
compartment with correct polarities. When appears or the display dims,
replace the batteries.
In the Pendant
Your pendant comes with one 12 V A23 battery, when
the LED on the pendant dims, replace the battery.
Use a screwdriver to open the battery cover, insert
a new battery with correct polarity, and replace the
battery cover.
Battery Notes
• Replace batteries quickly to save records.
• Use only fresh batteries of the required size and recommended type.
• Do not mix batteries of different sizes or chemistries.
• Always remove old or weak batteries. Batteries can leak chemicals that
can damage electronic parts.
• The PT3802 Big Button Emergency Phone will work during a power
failure. The 4 AA batteries (not included) will provide 30~40 hours of
back up time.
Installing Batteries
PT3802-OM-EN.indd 7 04/08/2008 11:53:17 AM

8
After your phone is powered on, system information appears in the
display.
1. Press MENU. LCD CONTRAST appears in the display. Press CALL
BACK/OK to display the current level, then press UP/DOWN to select
one of five settings. Press CALL BACK/OK to confirm and go to time
and date setting. TIME/DATE appears.
2. Press CALL BACK/OK to display the time, then press UP/DOWN
to set the time, month and date. Press CALL BACK/OK to confirm.
LANGUAGE appears.
3. Press CALL BACK/OK to display the current language, then press
UP/DOWN to select the desired language. Press CALL BACK/OK to
confirm and go to voice setting. VOICE appears.
4. Press CALL BACK/OK to display the language, then press UP/DOWN
to select the desired language or VOICE OFF. Press CALL BACK/OK
to confirm.
5. Repeatedly press MENU until FLASH appears, press CALL BACK/OK
to display the current setting, then press UP/DOWN to select flash
time. Press CALL BACK/OK to confirm and go to tone/pulse setting.
6. TONE/PULSE appears, press CALL BACK/OK to display the current
setting, then press UP/DOWN to select tone or pulse 40/60 setting.
Press CALL BACK/OK to confirm.
Notes:
• If you do not press a button within 20 seconds, the phone returns to
the standby mode, or press PHONE/CID to return to standby mode.
• The default setting for voice is English, if you select other languages,
the phone will announce the phone number, digits and phone/CID
only.
Setting the Remote Pendant
The phone comes with one remote pendant for emergency, you can pair
up to 5 pendants to your phone, FULL appears if you pair the 6th pendant.
To pair the pendant to your phone:
1. Repeatedly press MENU until REMOTE PENDANT appears, press CALL
BACK/OK, press UP/DOWN to pair (PAIRING appears) or cancel
pairing (DELETE? appears) your pendant.
Setting Your Phone
PT3802-OM-EN.indd 8 04/08/2008 11:53:17 AM

9
2. To pair your pendant to your phone, select PAIRING, press CALL
BACK/OK on the phone, PAIRING... appears, press the red button on
the pendant. If the pendant is successfully paired, PAIRED appears, if
not, PAIRING FAILURE would appear.
3. To cancel, select DELETE? and press CALL BACK/OK to confirm.
Making calls
Press SPKPHONE to switch between the handset and speakerphone for
convenient hands-free use. To end a call, press SPKPHONE again.
When on a call, press SPKPHONE to make or answer calls.
Caller ID
Your phone stores up to 64 Caller IDs. If you subscribe to Caller ID
service, your phone displays the following call information:
• Caller’s phone number - Your phone displays up to 14 digits. If the
number is longer, the display shows only the last 14 digits.
• Time and date of the call.
• Caller’s name (if you have this service).
If the Caller... Display Shows
New number not previously displayed NEW
Call more than once REPEAT
Blocked number or name PRIVATE
No information sent (International or PBX call) UNAVAILABLE
Calling from long distance LONG DISTANCE
Invalid or uncompleted Caller ID LINE ERROR
Your phone stores the caller information. To see Caller ID records,
repeatedly press UP or DOWN.
Note: The Caller ID’s time and date can update the time on you phone.
PT3802-OM-EN.indd 9 04/08/2008 11:53:17 AM

10
Call Back from the Caller ID Memory
Press PHONE/CID repeatedly until CLIP appears, pick up the handset,
press UP or DOWN to select the desired number, then press CALL BACK/
OK.
Note: If the Caller ID number is 10 digits, press CALL BACK/OK once,
1 will added before the Caller ID number automatically. Press UP or
DOWN to select or deselect adding 1. Press CALL BACK/OK again, the
speakerphone turns on automatically and dials the displayed number.
Saving Caller ID Numbers
To save a Caller ID number, use UP or DOWN to find the desired number,
then hold down MENU until COPY TO MEMORY appears. Press CALL
BACK/OK to save the number, SAVED appears.
Deleting Caller ID Records
You cannot delete unviewed Caller ID records or during a call.
• To delete a single record, press DELETE. DELETE? appears. Hold down
DELETE until the number disappears.
• To delete all records, hold down DELETE until DELETE ALL? appears.
Then, hold down DELETE until NO CALLS appears.
Memory
You can store 2 direct memory locations and 30 phone numbers in the
phone book.
Storing Numbers in Memory Locations
1. Repeatedly press MENU until STORE NUMBER appears.
2. Press CALL BACK/OK.
3. Enter the phone number you want to store, including 1+ area code for
long distance numbers. Press CALL BACK/OK. Then press M1 or M2 to
save.
Storing Numbers in the Phone Book
1. Repeatedly press MENU until STORE NUMBER appears.
2. Press CALL BACK/OK.
3. Enter the phone number you want to store, including 1+ area code for
PT3802-OM-EN.indd 10 04/08/2008 11:53:17 AM