PVI NickelShield PV 6382 07 User manual

LOW NOx MAXIM ▪PACKAGED GAS WATER HEATER
NICKELSHIELD®NICKEL-PLATED STORAGE TANK
PVI reserves the right to change
the design and specification
without notice.
PV 6382 11/07
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
[phone] ▪[phone] ▪www.pvi.com
STANDARD FEATURES AND EQUIPMENT
• 82% thermal efficiency
• SCAQMD compliant
•NOx emissions certified at <55 ppm at 3% 02and/or less than 40 nanograms per joule (199 to 399 MBtu/h)
•NOx emissions certified at <30 ppm at 3% 02(above 399 MBtu/h)
• NICKELSHIELD®nickel-plated tank with 10-year warranty, three-year scale failure warranty and one-year cost-free service policy 
•Nonferrous, removable fittings at all tank connections
• Nickel-plated, copper-clad steel firetubes
• SCALEGUARD®tubesheet protection
• Upper and lower immersion operating thermostats
• Immersion temperature limiting device (high limit control)
• ASME-rated temperature and pressure relief valve
•Drain valve
•Handhole tank cleanout
• Power combustion burner
•Spark ignition
• Electronic combustion sequencer and flame safeguard with pre-purge
•Combustion sequence indicating lights (> 399,000 Btu/h)
•Differential pressure air flow switch
• Second main gas valve (> 399,000 Btu/h)
•Compliant with ASHRAE 90.1 for thermal efficiency and standby loss
• Fiberglass insulated tank
•Draft regulator (barometric damper)
• Steel jacket panels with industrial-grade finish
• Factory-authorized start up
•ASME stamped—150 psi MAWP
• National Board Registered for 150 psi working pressure
• UL listed to safety standard UL 795 “Commercial-Industrial Gas Heating Equipment”
• FM compliant
OPTIONAL FEATURES AND EQUIPMENT
 Long-life service policy 
 AGA-rated temperature and pressure relief valve(s)
 2,500,000 Btu/h FM controls package. Adds electronic low-water cutoff, manual-reset high limit, single-try firing control and high-low
gas pressure switch. (not required for FM compliance below 2,500,000 Btu/h) (available only on 540,000 and 650,000 Btu/h)
 CSD-1 / IRI compliant components include manual reset electronic low water cut off, manual reset temperature limiting device and
Hi-Lo gas pressure switch (as required)
 Electronic combustion sequencer and flame safeguard with pre– and post-purge
 Electronic low-water cutoff
 Manual-reset, temperature limiting device
 DUO-SET™controls for dual-temperature applications
 Dial temperature and pressure gauges
 Tridicator
 Alarm bell with silencing switch
 Seven-day time clock
 Digital seven-day time clock with battery backup
 Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
Consult factory for other codes
 See complete warranty and/or service policy for details