PVI Platinum Gas-Fired Water Heater User manual

 See complete warranty and/or service policy for details
PLATINUM®CONDENSING GAS-FIRED WATER HEATER
POLYSHIELD®POLYMER-LINED TANK
PVI reserves the right to change
the design and specification
without notice.
PV6801 10/08
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
[phone] ▪[phone] ▪www.pvi.com
STANDARD FEATURES AND EQUIPMENT
• POLYSHIELD®polymer-lined tank with 5-year warranty 
• Five-year heat exchanger warranty 
• One-year cost-free service policy 
• Factory authorized startup
• Up to 94% thermal efficiency
• Electronic temperature control with LED readout; accurate to ±1°F
• Removable heat exchanger with non-ferrous waterside construction and solid copper fire tubes
• 100% submerged combustion
• Heat exchanger ASME stamped for 160 psi operating pressure
• Storage tank ASME stamped for 160 psi operating pressure and National Board of Pressure Vessels Registered
• Nonferrous, removable fittings at all tank connections
• Fan assisted, pre-mix, stainless steel burner
• Two safety shut off valves (single body)
• NOx emission levels compliant with SCAQMD
• Air proving switch
• Electronic combustion sequencer and safeguard with pre-purge
• Operating thermostat
• Redundant high limits with automatic reset
• ASME-rated temperature and 150 psi pressure relief valve
• Drain valve
• Fiberglass insulated tank
• Durable, corrosion-resistant, polyethylene jacket
• Heavy-duty steel stand
• Support stand is designed to allow tank to be rotated to horizontal position for heat exchanger removal
• 23"-diameter tank access after heat exchanger removal
• ASHRAE 90.1 compliant for thermal efficiency and standby loss
• UL listed for PVC venting material
• UL listed for zero clearance from combustible walls (non-combustible floor only)
• UL listed for NSF-5 compliance
• FM compliant
OPTIONAL FEATURES AND EQUIPMENT
 Electronic low water cutoff
 Manual-reset, immersion temperature limiting device
 Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
 Water pressure gauge
 L.P. gas operation
 Condensate neutralization system
 CSD-1 and IRI compliant components (includes manual reset electronic low water cut off and manual reset
temperature limiting device)
 AGA-rated temperature and pressure relief valve
 Tridicator (field installed)
 Lifting attachments
Other agency compliance _______________________ (consult factory)