PVI NickelShield Tank Series User manual

Product is patented in the U.S., Canada, and Mexico.
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
PV 6299 03/04 [phone] •www.pvi.com
MAXIM• PACKAGED OIL WATER HEATER
NICKELSHIELD®NICKEL-PLATED STORAGE TANK
250 GALLON TANK SERIES
MODEL NUMBER 27N250A-MXO 40N250A-MXO 54N250A-MXO 72N250A-MXO 100N250A-MXO 120N250A-MXO 140N250A-MXO
GPH Recovery at 40° to 120° F 340 500 670 900 1250 1500 1750
GPH Recovery at 40° to 140° F 270 400 540 720 1000 1200 1400
Input Btu/h 270,000 399,000 540,000 720,000 1,000,000 1,200,000 1,400,000
Input, gph #2 Fuel Oil 2.0 2.8 3.8 5.0 7.1 8.6 10.0
A Cold Inlet - NPT 2 2 2 2 2 2 2
B Hot Outlet - NPT 2 2 2 2 2 2 2
C Drain - NPT 1 1 1 1 1 1 1
D I - Beam Skids 3 X 45 3 X 45 3 X 45 3 X 45 3 X 45 3 X 45 3 X 45
F Overall Height 75 75 82 82 82 82 82
G Flue Outlet Diameter 6 7 8 10 10 12 12
H Oil Inlet - NPT 1/2 1/2 1/2 1/2 1/2 1/2 1/2
J Motor HP 120 V, 1Ø, 60 Hz. 1/3 1/2 1/2 1/2 1/2 1/2 1/2
Motor Amps 8 10 10 10 10 10 10
L Height to Outlet 65 65 73 73 73 73 73
M Height to Inlet 28 28 36 36 36 36 36
Approx. Shipping Weight - lbs 1470 1520 1600 1710 1870 2000 2120
Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form # PV 6293.
STANDARD ELECTRICAL REQUIREMENTS:
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS
MOTOR VOLTAGE: 120V, 1Ø, 60 HZ.
SEE ABOVE CHART FOR BLOWER MOTOR AMPS
VENTING REQUIREMENTS:
-.02" TO -.06" W.C. (NEGATIVE PRESSURE).
THE ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED UPON THE
VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER SIZING, CONSULT VENTING SUPPLIER.
1. Control Enclosure
2. ASME Temperature &
Pressure Relief Valve
3. 3” NPT Handhole
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN AND
SPECIFICATION WITHOUT NOTICE.