Pyle Pro PTCDCS32BT Instruction Manual

PTCDCS32BT
,BLUETOOTH

Bluetooth Indicator.

PTCDCS32BT
PTCDCS32BT

PTCDCS32BT
PTCDCS32BT
PTCDCS32BT

1.Turn on the unit,rotate the volume control to desert level.
Turn the Function Knob to PH mode, and make sure the tone-arm is on the resetting state.
A short Bluetooth starting tone can be heard, then the Bluetooth indicator will be flashing.
2.Turn on your Bluetooth device and scan. It will be displayed as "Pyle Turntable" when
discovered by your Bluetooth device. Enter password "0000" during pairing if necessary
3.When the unit is paired with your Bluetooth device, you can hear a short tone from the
speakers.
Play your Bluetooth device as you normally do and the sound will be played from this unit.
Then you may enjoy the music.
Note:
1.Make sure your Bluetooth device and this unit is within 10 meters
2.Check and see if there are other bluetooth devices nearby interfering the signal and
connection.
3.This unit could be paired by multiple different Bluetooth devices, but could
only be connected and played by one of them at a time. Make sure no others device is
actively connected to it already when you are trying to connect the one you are working on.
BLUETOOTH FUNCTION OPERATION:
PTCDCS32BT

18