Pyle PDA99BU User manual
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER OF THIS UNIT. THERE ARE NO USERSERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the device and receiver.
•Connect the device into an outlet on a circuit dierent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help
Changes or modications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS)
d'Innovation, Sciences et Développement économique Canada.
Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un
fonctionnement indésirable de l'appareil
1. Read these instructions thoroughly before using this item.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. WARNING: To prevent re or electric shock, do not expose this equipment to
rain or moisture. Do not store or operate this product near any liquids.
6. Clean only with a dry cloth.
The lighting ash with arrow head symbol within an equilateral triangle is intended
to alert the user to the presence of “dangerous”voltage within the product’s
enclosure that may be of sucient magnitude to constitute a risk of electric shock
to humans. Users should exhibit extra safety when this symbol appears in this
instruction manual and follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
this manual.
www.PyleUSA.com
2
www.PyleUSA.com
3
7. Do not store or operate this product near any heat sources such as radiators, heat
registers, stoves, or other apparatuses (including ampliers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a round grounding prong. The wide blade or third prong is
provided for your safety. If the provided plug does not t your outlet, consult an
electrician for the replacement of the obsolete outlet.
9. Protect the all wires connected to this unit from being walked on or pinched,
particularly plugs and the point where they exit from the unit. When removing the
cord from the power outlet, remove it by holding the plug not by pulling the cord.
10. Unplug the unit during lighting storms or when unused for long periods of time.
11. When wiring this unit and all other equipment used in connection to this unit
make sure that all of your equipment is turned OFF.
12. Once installation and wiring is complete power on all your equipment with the
volume and level controls turned DOWN. Once all the equipment is ON slowly
raise the volume or level controls to their proper positions.
13. When grounding this unit, be sure to do so correctly, so as not to defeat the
built-in grounding in this unit.
14. Before placing, installing, rigging, or suspending any product, inspect all
hardware, suspension, cabinets, transducers, brackets and associated equipment
for damage. Any missing, corroded, deformed, or non-load rated component
could signicantly reduce the strength of the installation, placement or array.
Any such condition severely reduces the safety of the installation and should
be immediately corrected. Use only hardware which is rated for the loading
conditions of the installation and any possible short-term, unexpected overloading.
Never exceed the rating of the hardware or equipment.
15. Consult a licensed, professional engineer regarding physical equipment installation.
Ensure that all local, state and national Regulations regarding the safety and
operation of equipment are understood and adhered to.
16. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Introduction
To get the most from the Wireless BT Streaming Amplier, it is recommended
that you review all of the information provided in the instruction manual before
operating the equipment.
ATTENTION
1. A: Connect the audio input with the CD/DVD/TV audio output.
NOTES:
• These jacks does not support video signal, so make
sure that the CD/DVD/AUX terminal are connected.
• Noise will be heard when you connect the unit with
CD/DVD/TV video output by mistake.
2. B: Signal output that can be connected with other
amplier or powered speakers.
3. STEPS FOR FM RADIO CONTROL
A. Connect the FM antenna before using the FM radio.
B. Press MODE button on the front panel or remote control to select FM mode.
C. Press PLAY/PAUSE button on the front panel or remote control, and will auto
scan and sore FM Radio station from 87.5Mhz to 108Mhz.
D. Press NEXT/PREV button to select the FM station.
4. REMOTE CONTROL
Remote control gives you commanding access only to USB/SD, Wireless BT and
FM functions and not the Master volume, microphone, bass, treble and other
functions.
www.PyleUSA.com
4
1. Press this button to enter folder control mode in
USB or SD play mode.
2. Press these buttons to select 8 types DSP eect
directly.
3. Press two buttons to adjust the sound Bass, BASS- is
to reduce bass output, BASS+ is to increase bass
output.
4. Press two buttons to select the previous or next
track in USB or SD or BT working mode, to select
previous or next station in FM working mode.
5. Press two buttons to adjust the sound Treble,
TREBLE- is to reduce TREBLE output, Bass+ is to
increase TREBLE output.
6. These buttons are Multifunction, press the numbers
to select the tracks directly. The units takes 2-3 sec.
to response in USB or SD mode. Hold these buttons
for 3 seconds to select source input. For example,
press and hold the 4 button for 3 seconds to select
the Bluetooth working mode.
7. Press this button to mute sound.
www.PyleUSA.com
5
8. Press this button to select one source input, swtich HD1, HD2, Opitcal, Coaxial, FM,
USB, SD, BT, DVD, CD and AUX input.
9. Play and Pause function for all working modes. Press this button to auto scan the
channel in FM mode and auto store channel.
10. Press these two buttons to increase or decrease the sound volume.
11. Press this button to select repeat mode. One-Repeat current play le, All-Repeat
all play les in the USB or SD.
ATTENTION!
Switch to the USB or SD mode only after inserting USB Flash driver or SD Card.
5. FILE FORMAT
Only MP3 and WAV format are supported for USB/SD stored les.
The unit may skip the unsupported track les in USB or SD cards.
6. USB PORT
The USB port is only used for playing audio les on your USB ash drive.
DO NOT use it for power supply as it may damage the unit.
DO NOT use USB port for power supply to other devices as it may damage the unit
to cause smoke.
FRONT & BACK PANEL
1. SD Card Reader/USB Port: For using external media on this device, just plug your
SD/USB into these ports.
2. LED Screen: All information regarding external media or this device will be
displayed from this screen.
3. Folder and track selection
4. Master Volume Knob: Adjust the master volume.
5. Power Switch: Press this Switch to turn the unit on and o.
6. MICROPHONE INPUTS: For connecting KARAOKE or EXTERNAL MIC.
7. Microphone Volume Control Knob: Turn this knob to adjust the microphone
volume level.
8. Microphone Delay time Control Knob: Turn this knob to adjust the microphone
delay time.
9. Microphone Reverb Depth Control Knob: Turn this knob to adjust the microphone
Reverb Depth.
10. Bass Control: Turn this knob to adjust the low frequencies of L CH and R CH.
11. Treble Control: Turn this knob to adjust the high frequencies of L CH and R CH.
12. Balance: Control the volume balance from left Chanel to right Chanel.
13. Headphone Output Jack: Connect the Headphone.
14. Input Selector: Turn this button to choose the favorable input.
15. AUX Input: IPOD/MP3 JACK-IPOD/MP3 connects to this jack.
16. AUDIO INPUT: Connect the audio output jacks of DVD/CD to these jacks.
17. LINE OUTPUT: Connect the RECORD input jacks to these jacks.
18. Optical Input: Connect the Optical Output Jack frorn TV, DVD etc.
19. Coaxial Input: Connect the Coaxial Output Jack from TV, DVD etc.
20. HD 1 Input: Connect the HD Output Jack from TV, DVD etc.
21. HD 2 Input: Connect the HD Output Jack from TV, DVD etc.
22. HD Output: Connect the HD Input Jack to TV, Monitor etc.
23. SPEAKER OUTPUT: Connect your speaker system to these terminals.
24. FM ANTENNA CONNECTOR: Connect for FM antennas.
25. BlUETOOTH ANTENNA: Pull the antenna out when using Bluetooth input
26. POWER SUPPLY: Connect to AC 115V/60Hz and 230V/50Hz outlet.
27. POWER VOLTAGE SELECTOR: 115V/230V.
www.PyleUSA.com
6
www.PyleUSA.com
7
CONTROL PANEL BUTTON
A. MODE BUTTON: Press this button to select one input from HDl, HD2, Opitcal,
Coaxial, FM, USB, SD, BT, DVD, CD and AUX input.
USB/SD mode will be set automatically after turning ON the unit.
Automatically plays mp3 les after inserting a USB ash drive or SD card.
B. Repeat BUTTON: Press this button to select repeat mode.
One-- Repeat current play le.
All-- Repeat all play les in the USB or SD.
Random-- Play les in the usb or SD without any regular pattern.
C. PREV BUTTON: Use this button to select previous track depending on these
dierent modes as below.
• In USB/SD mode: Use to select previous track.
• In Wireless BT mode: Use to select previous track.
• In FM mode: Use to select previous radio channel.
D. Each press of the PLAY/PAUSE BUTTON causes the operation to change from play
to pause. Press the PLAY/PAUSE BUTTON one time to auto scan all frequencies
from 87.5MHz to 108MHz in FM mode. Press the button to auto scan channels
when you use FM radio for the rst time. After searching, the unit will auto store
all the radio channels and play from the rst radio channel.
You don't need to rescan every FM radio start up.
E. NEXT BUTTON: Use this buttons to select next track depending on these dierent
modes as below.
• In USB/SD mode: Use to select next track.
• In Wireless BT mode: Use to select next track.
• In FM mode: Use to select next radio channel.
STEPS FOR RECEIVE SCAN FM STATIONS
a-- Please connect the come with FM Antenna to FM Jack on back Pannel, the other
end is in a relatively open position.
b-- Press MODE button to enter into FM mode.
c-- Press the PLAY/PAUSE BUTTON one time to auto scan all frequencies from 87.5MHz
to 10BMHz, after searching, the unit will auto store all the radio channels.
d-- Press the PREY BUTTON or NEXT BUTTON to select previous radio channel or
next radio channel.
www.PyleUSA.com
8
USB/SD Card Control Console Display Screen
1. MODE: The display will show "USB" when set to USB mode, "SD" when set to SD
card mode, "BLUE" when set to bluetooth mode, "87.5-108" when set to FM mode.
2. Repeat: Switch Repeat mode.
3. Previous track for USB/SD/BT model or Previous Station for FM mode.
4. Play and pause button; in FM mode, press this button to automatic search
FM Station and automatic save Station.
5. Next track for USB/SD/BT model or next radio Station for FM mode.
6. Folder search mode: Press the folder/track knob, "F001" will show on LED display
screen, and rotate the folder/track knob to select a folder.
7. Track search mode: Rotate the folder/track knob or press the previous and next
buttons, the current track number will be showed here.
8. Elapsed time: The elapsed time of the current track will show here.
9. Show FM frequency of the current station.
www.PyleUSA.com
9
Track/Folder Searching Knob
• Turn this knob clockwise to search through all of the tracks inside the USB ash
drive/SD Card. Each track will appear by the number of the track. It will show the
tracks or folders chronologically (from when the les were loaded onto the USB
ash drive/SD Card. Press the knob to begin playing the desired track. First the tracks
on the root le will be displayed and then the tracks that are in folders.
• Press this knob to activate the folder searching function. Once pressed the word
"F001" will begin show on the display screen. Then, turn this knob clockwise to
search the folders inside the USB ash drive/SD Card.
Press the knob to begin playing the tracks from that folder.
STEPS FOR CONNECTING WITH BLUETOOTH DEVICE
A. Press MODE button or Press BT button and enter into Wireless BT mode.
B. Search for the Wireless BT device and nd the BT name “PYLEUSA or BT”.
C. Select the PYLEUSA or BT pairing name and wait for the device to pair.
D. The unit will make a sound conrming that the devices have successfully paired.
E. Once paired you can play music from your Wireless BT device. You can also use
the control buttons on the unit to select the tracks from your Wireless BT device.
F. Use the other controls, play/pause, previous track & next track to play audio from
Wireless BT.
NOTE:
The USB input is ONLY meant to connect to a USB dash drive (thumb drive).
Connecting a MP3 player or computer directly to the USB ash drive input will result
the unit failing to play audio from those devices.
What’s in the Box:
• Amplier Receiver
• Remote Control
• FM Antenna
www.PyleUSA.com
10
Features:
• HIFI 2.0 Channel Audio Amp Design
• Bluetooth Wireless Audio Streaming Ability
• USB Flash & SD Memory Card Readers
• FM Radio with Big Digital LED Display
• FM Station Auto-Search Scan
• 8 DSP eects (General, Live, VBass, POP, Classic, Jazz, Rock, 3D)
• Loudness On/O
• (1) Optical Inputs
• (1) Coaxial Inputs
• (2) HDMI Inputs
• (1) HDMI Outputs
• FM Radio with Big Digital LED Display
• Aux (3.5mm) Input Jack
• Connect & Stream Audio from External Devices
• Multi-Source RCA (L/R) Audio Input Connectors
• (2) 1/4’’ Microphone Inputs
• Support 2K/4K and 3D Video for HDMI
• (1) 1/4’’ Headphone Outputs
• (2) Pairs RCA (L/R) Audio Input Connectors
• (1) Pair RCA (L/R) Audio Output Connectors
• Combo Screw-Type Banana Plug Speaker Jacks
• Front Panel Button Control Center
• Independent Input Source Select-able
• Bass, Treble, Balance, Source Volume Adjustable
• Unique 'Folder /Track ' Music Search Control Knob
• Repeat & Random' Audio File Functions
• Headphone Volume independent control
www.PyleUSA.com
11
Bluetooth Connectivity:
• Built-in Wireless Music Streaming Receiver
• Compatible with All of Your Favorite Bluetooth Devices
(iPhone, Androids, Smartphones, iPad, Tablets, etc.)
• Bluetooth Version: 5.0
• Wireless Range: 45’+ ft.
Technical Specs:
• RMS Power Output: 35-Watt x 2 @ 8 Ohm
• Construction Material: Metal, Aluminum Alloy Panel
• LED Screen Size: 3.3’’x1’’
• MAX Power Output:300 Watt (@ 4 Ohm)
• Tone Control: Bass, f=100Hz +/-12dB, Treble, f=10 KHz +/-12dB
• Frequency response: 20-20KHz, +/-2dB
• S/N Ratio: >85dB
• T.H.D.: <1.0%
• Input sensitivity: 200mV
• Maximum USB Flash & SD Memory Card Support Size: 64GB
• Digital Media File Support: MP3, WAV, WMA, APE
• Battery Operated Remote Control, Requires AAA Battery (Not included)
• Power Cable Length: 4.5’ft.
• Product Dimensions (L x W x H): 10.2'' x 9.8'' x 2.8'' -inches
• Power: 110/230V, Switchable
Table of contents
Other Pyle Amplifier manuals
