Pyle Blue Series User manual

PTA22BT
WirelessBTMiniBlueSeriesAudioAmplifier
Compact Desktop StereoAmplifier Receiver
with USB/SD/FM/Wireless BT, Pager
& Mixer Karaoke Mode, Mic Input (40 Watt x 2)
Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]

FOREWORD
Your New Pyle Amplier gives you the power and versatility you need in a
professional sound system. The amplier's wide frequency response makes it
suitable for amplifying music or vocal program material. It can be used in
meeting halls, house, restaurant, schools, stores, or for paging systems.
Please read this manual thoroughly before you attempt to set up and use
the amplier. It contains a range of installation suggestions as well as
instructions to ensure safe usage.
Installed properly, you can expect years of trouble-free service from this
product.
FEATURES AND CONTROLS
FRONT PANEL
1. POWER ON LED Indicator: Lights to indicate power is turned ON/OFF.
2. USB Charge Port: USB port for smartphone charging only, no USB reader
function
3. MODE, PLAY, PREV and NEXT Function Control buttons:
• MODE Button: For audio selection like WIRELESS BT/SD/LINE IN
• PLAY/PAUSE BUTTON: Play and Pause control button
• PREV/NEXT: Quick backward or next song
4. SD/MMC Socket for playing SD/MMC cards
5. 1/8" AUX/CD IN: Connect the MP3 Device (player) sources such as PC
(CD ROM), laptop, walkman, iPod and mobile phones
6. Main Power ON Switch: Switch ON/OFF the amplier by using this switch.
7. 1/4" PHONE JACK: Accepts headphones with 1/4" plug.
8. MIC VOLUME CONTROL: Turn the knob clockwise to increase the
connected MIC volume
9. Master Volume: Adjusts main audio system volume level.
10. BALANCE CONTROL: Adjust the sound balance between the left and
right amplier output.
11.BASS AND TREBLE TONE CONTROL: Lets you boost or attenuate bass
and treble for the desired sound.
12. AUX1/AUX2/CD INPUT SELECTOR: Lets you select the desired input
music source.
www.PyleUSA.com
2
www.PyleUSA.com
3
This product can expose you to a chemical or group of checmicals, which may include
“Nickel Carbonate” which is known in the state of California to cause cancer, birth defects,
or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

WIRELESS BT STREAMING OPERATION INSTRUCTION
External devices which have a built-in BT feature can be connected to this
amplier wirelessly to play through the amplier's speakers. If your amp is
connected to speakers, you will hear audible tones which will help for
connecting.
1. At rst be sure that the amplier is powered ON, and turn the volume to
low. Pull out the BT Antenna at the back panel for better receiving signal.
Press MODE button on the front panel then the BT Indicator light will be lit.
(The unit is automatically ready to pair with your device)
2. Turn ON the Wireless BT function of your external device.
3. Search for available devices within range of your external Wireless BT device.
4. Wait for a while then nd the “PYLEUSA” on the paired devices list on your
external device and select “PYLEUSA”, or nd the “BT” on the paired devices
list on your external device and select “BT”.
5. Your amplier will beep and the lights will ash once when pairing is
successful.
6. You can now play music and other audio on your external device through
your amplier.
7. The amplier will beep and the lights will ash once again when the
external device is turned o or unpaired.
CARING FOR YOUR PYLE AMPLIFIER
Your Pyle Amplier is an example of superior design and craftsmanship.
The following suggestions will help you care for your amplier so you can
enjoy years of use:
• Keep the amplier dry. If it gets wet, wipe immediately.
• Use the amplier only in well-ventilated installations.
• Handle the amplier away from dust and dirt.
• Wipe occasionally with a damp cloth to keep it looking new.
• Do not use harsh chemical, solvents or detergents!
13. SWITCHABLE MIC PAGER AND MIXING MODES: Set to PAGER, allows a
voice to be heard clearly through the microphone by attenuating auto-
matically all the audio input source.This is good to use when paging the
person in oce, store, or restaurant.
Set to MIXING, both of the voices from the microphone and music will
exist at the same time. It is similar like playing at KARAOKE events.
BACK PANEL
14. Wireless BT Antenna: Wireless BT Streaming receiver
15. Fuse: The amplier uses fuse for protection against surges and short
circuit. If the amplier suddenly turns o and will not turn on, check the
fuse. If necessary, replace it with a 1-amp, 250-volt, fast-acting, 5x20mm
fuse (not supplied).
16. 1/4" MIC INPUT JACK: Lets you connect a microphone with a 1/4" plug.
17. AUX1/AUX2/CD RCA INPUT: Lets you connect to most high-level audio
sources such as CD player, tape deck, tuner, camcorder or VCR.
18. REC RCA OUTPUT: Lets you connect the amplier to a tape deck for
recording.
19. Push Type Speaker L/R Terminals: Let you easily connect the speaker
wires directly to the amplier
20. 110V/220V Switch: According to power voltage, push this button to the
correct station of the 110V or 220V.
21. AC IN Power Cord: Connect to AC 110V/60Hz or 220V/50Hz
22. FM ANTENNA CONNECTOR: Connect for AM and FM antennas
www.PyleUSA.com
4
www.PyleUSA.com
5

Features:
• Hi-Powered Component Amplier System
• Compact Desktop Receiver System Design
• Built-in Wireless BT Audio Streaming
• Works with All of Today's Latest Wireless BT Devices
• Smartphones, Tablets, Laptops, Computers, etc.
• USB/SD/FM playing
• Switchable Mic Pager and Mixing/Karaoke Modes
• Page Mode: Allows Voice Transmission via Mic
• Mix Mode: Allows Both, Voice & Music Transmission
• RCA Audio Input (AUX 1, AUX 2, CD)
• AUX (3.5mm) Input Connector Jack
• (Connect Devices like Smartphones, Tablets, MP3 Players, etc.)
• Treble, Bass, Balance, Master Volume Adjustable
• Four Push Type Speaker L/R Terminals
• Input Selector Switch
• RCA Record Output
• 1/4'' Headphone Output
• 1/4” Mic Input Jack
• Built-in Short Circuit and Power Surge Protection
• Compatible with Audio/Computerized Devices
• Rotary Master & Microphone Volume Controls
• Front Facing Control Panel
• LED Indicator Lights
Wireless BT Connectivity:
• Built-in Wireless BT Audio Receiver
• Simple Pairing for Wireless Music Streaming
• Works with All of Today’s Latest Wireless BT Devices
(Smartphones, Tablets, Laptops, computers, etc.)
• Wireless BT Version: 5.0
• Wireless BT Network Name: ‘PYLEUSA’
• Wireless Range: Up to 40’ft.
Technical Specs:
• Power Output: 40 Watt x 2 (MAX)
• 10% RMS at 4-Ohm Impedance
• Signal-to-Noise Ratio: 75dB
• Frequency Response: 20Hz - 20 kHz
• Input Sensitivity: 150mV
• T.H.D.: 0.3%
• Bass/Treble: +/-10dB
• 110V/220 Voltage Selector, 50/60Hz
• Dimension (W x H x D): 7.48'' x 2.87'' x 5.31'' -inches
IMPORTANT
Replacing a fuse
This amplier requires fuse with the proper
rating for protection from power surges and
short circuits. If the amplier suddenly turns
o or would not turn on, the fuse is properly
blown.
• Let the amplier cool down and see if it starts again before you
assume a fuse needs to be replaced.
• Unplug the amplier from the AC outlet.
• Turn the fuse holder cap and pull out the cap.
• Remove the old fuse and replace it with an identical one.
CAUTION: Never use a fuse with a higher rating
TROUBLESHOOTING
www.PyleUSA.com
6
www.PyleUSA.com
7
NO POWER The fuse might be blown Check the amplier's fuse
and replace it if necessary.
NO SOUND
Sound source or speakers
may not be connected
properly
Check all connections
Master volume control
may be set to a minimum
Adjust the volume control
to a higher setting
The speaker's wire
might have the wrong
impedance
Make sure that the speakers
that you have connected to
the amp are matching in
impedance
The amplier is shutting
down or powering o
Turn the amplier o and let it
cool, make sure that the
amplier is properly ventilated,
and then tum it back on
Feedback Microphone and speakers
are to close together
Reposition the microphone
and speakers