Pyle PJUB25BT User manual

JUKE BOX OWNERS MANUAL
MODEL: PJUB25BT
AM/FM VINTAGE CD JUKE BOX
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE

IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions –All the safety and operating instructions should be read before the
product is operated.
2. Retain Instructions –The safety and operating instructions should be retained for future
reference.
3. Heed Warnings –All warnings on the product and in the operating instructions should be
followed.
4. Follow all instructions –All operating and user instructions must be followed.
5. Cleaning –Unplug this product from the wall electric socket before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments –Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
7. Water & Moisture –Do no use this product near water –For example, near Bath tub, wash
bowl, kitchen sink or laundry tub, or near swimming pool etc.
8. Do not place this product on an unstable stand, tripod, bracket or table.
9. Ventilation –Slots and openings in the cabinet are provided for ventilation, to ensure
reliable operation of the product and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10. Power Source –This product should be operated nly from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company.
11. Power Cord Protection –Power supply cords should be routed so that they are not likely to
be walked on or by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the product.
12. Lightning –For added protection for this product, during a lightning storm or when it is left
unattended and unused for long period of time, unplug it from the wall outlet. This will
prevent damage to the product due to lightning and power-line surges.
13. Overloading –Do not overload the wall electric socket, extension cords as this can result in
a risk of fire or electric shock.
14. Do not attempt to service this product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
15. The product should be placed away from heat sources such as radiators, stoves or other
products (including amplifiers) that produce Heat.
1
Troubleshooting –
In case of trouble with the unit, please look through this chart and see if
you can solve the problem by yourself before calling the Service Center –
PROBLEM
CAUSE
SOLUTION
WHOLE UNIT
Power does not come
on when the power
switch is pressed
Unit is Unplugged
Connect the unit to the
power adaptor supplied
with the product
No sound comes out of
the speakers
The volume is turned down to
low level.
The input selector does not
match the playback/source
Adjust the volume.
Re-select the desired
input source.
The Sound is noisy
The unit is too close to a TV
Set or another such device
Turn off the TV or other
appliance or re-locate the
Jukebox device
TUNER
Cannot listen to any
station or signal
appears weak
The station is not tuned-in
properly.
A TV set is being used nearby
and is interfering with the
radio reception
Tune-in the desired
station properly.
Turn-Off the interfering
TV set.
The sound is distorted.
The antenna is not oriented
properly
Re-orient the antenna
until the reception
improves
CD PLAYER
CD stops immediately
after starting, or unit
pauses or stops during
play
The CD is inserted upside
down.
The CD is dusty or dirty or
there is condensation on the
CD.
Insert the CD with the
printed side right-side up.
Carefully clean and dry
the CD
No sound
The CD Player is Paused
Press the Play/Pause
button to resume playing
the track
Specific CD is noisy or
playback stops or skips
The CD is scratched or
damaged.
The disc is very dirty.
The CD should be
changed.
Carefully clean the CD
“nod” is shown on the
CD display
The CD is scratched or
damaged.
The disc is very dirty.
The CD should be
changed.
Carefully clean the CD
6

LISTENING TO USB/SD card
1. Press the Power/Mode button until the Led Display indicate “USb” or “CArd”. If not USB or
SD card, the led display will indicate “no”. Once the USB flash/SD card insert into the USB
or SD card slot, it will automatically start playback. Press “Prev” or “Next” to select the
previous or next track.
2. To select repeat one song, select the song that you want to repeat. Press “Prog” once, the
Led display will show “1” on the bottom right corner.
3. Press “Prog” once again to repeat all tracks. The Led display will show “All” on the same
corner.
4. Press “Prog” one more time to select Random. The Led display will show “RDM” on the
top.
5. Press “Stop” button to stop playback.
6. To select the volume level, Turn the rotary Volume Control Knob.
LISTENING TO BLUETOOTH
1. Press the Power/Mode button until the Led Display indicate “bLUE”, the Led display will
flash. Pairing the audio source with the unit by select “JUKEBOX”. Once it connected, the
Led display will stop flashing.
2. You can select previous or next song by using the “Prev” or “Next” button on the front
panel or using your audio source.
3. To select the volume level, you can turn the rotary Volume Control Knob on the front
panel or control by your audio source.
LISTENING TO AUX-IN
1. Insert the provided Aux-in cable into the Aux-in Jack, the unit will immediately goes into
Aux-in mode. The Led display will indicate “AUH”.
2. Use the controls on your Aux-in audio source to select your desire songs.
5
Precautions –Safety Information –
CAUTION:
1. Use of controls and adjustments or performance of procedures other than those
specified here, may result in hazardous radiation exposure.
2. If this product develops trouble, contact a qualified service center, and do not use the
product in a defective state.
See Markings on the back of the unit –
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
2

Unit Specifications –
Speaker –
Output Power: 2 Watts x 2
Frequency Response –180 to 12,000Hz
Impedance –4 Ohms
Input Power: Max 3 Watts
Tuner –
FM –Frequency Range –87.5 to 108Mhz
AM –Frequency Range 522 to 1620Khz
General –
Power: 110V / 60Hz
Power Consumption: 9Watts
Unit Dimension (W*H*D): 270mm X 395mm X170 mm (approx.)
Weight: 5.79Lbs / 2.63Kg (approx.)
Standard Accessories –Power Adaptor, Instruction Manual, Aux Cable
Package Contents
AM/FM Vintage Bluetooth Jukebox
Power Adaptor
AUX Cable
Instruction Manual
3
Description of Parts –
Listening to the Radio –
1. Press “POWER” button to choose “FM” Mode
2. Press “STOP/BAND” this button to choose “FM” or “AM” mode.
3. Press “PLAY/PAUSE” it would search for stations automatically and also search memory
stations.
4. Search for stations as above mentioned. Press “PROG/PLAYMODE” repeatedly and select
the channel you already searched. And the table number will be displayed
5. Manual Tuning –Press the “NEXT/FF/TUNER+” or “PREV/FW/TUNER-“, it will increase or
decrease 0.1 MHz respectively for FM and it will increase or decrease 10 KHz respectively
for AM. Press and hold the “NEXT/FF/TUNER+” or “PREV/FW/TUNER-“ for 2 seconds. The
device will automatically start and search the frequencies for the next strong station and
stop on that station. 4