Pyle PJCDUB25 User manual


INSTRUCTIONS FOR USE
MINI CD JUKE-BOX with USB and FM Radio



IMPORTANT SAFETY INSTRUCTIONS
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you
set up and operate your system properly and enjoy all of its advanced features. Please save
this owner’s guide for future reference.
WARNING:
To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
Liquids can cause a failure and/or a fire hazard. DO NOT OPEN THE BACK PANEL FOR
RISK OF ELECTRICAL SHOCK.
This symbol indicates that there are important operating instructions in the literature
accompanying this unit. This symbol indicates that dangerous voltage constituting a risk
of electric shock is present within this unit. To reduce the risk of fire or electrical shock, do
not expose this product to rain or moisture.
This product is intended to use only with the power supply provided.
This product must be used indoors. It is NOT designed for outdoors use.
WARNING:
Keep the remote control battery away from children. It may cause a fire or chemical burn
if mishandled. Dispose of used batteries promptly.
Please dispose of used batteries properly, following any local regulations.
Location of Control




















Playing CD
1. This unit is using suction type CD device.
2. Press ON/OFF button to turn on the unit. Switch CD/USB-FM-AUX to CD/USB mode.
Once the red indicator is on, it means CD/USB mode is working. The unit supports
CD, CD-R, CD-RW, MP3, and MP4 CD.
3. Insert CD into CD slot half. Press to load another half. If you press , the CD
will be played automcatically in sequence.
4. Change or choose program. While the unit is playing, press or allows you
to choose certain song or change program.
5. Press , the unit system will jump to the beginning of next program. Press , it
will return back to the beginning of current program, press again, it will jump to
the beginning of last program.
6. While playing, press V+ to increase the volume. Press V- to decrease the volume.
7. Press to pause or restart the current program.
8. To change the CD，Press to exit the CD, insert another new CD half and then
press to pull in the whole CD. The unit will play the CD automatically in
sequence.
IMPORTANT NOTICE: CD must be removed from the CD unit before using
the USB mode or AUX mode. USB mode or AUX mode will not be
operational if there is a CD in the CD unit.
2
1


Playing USB
1. Press ON/OFF button to turn on the unit. Switch CD/USB-FM-AUX to CD/USB mode.
Press , the driver will exit the CD, the unit system will enter into USB mode.
2. Insert USB saved with MP3/WMAfile, the unit will play the USB automatically in
sequence.
3. Change or choose program. While the unit is playing USB, press or
allows you to choose certain song or change program.
4. Press , the unit system will jump to the beginning of next program. Press , it
will return back to the beginning of current program, press again, it will jump to
the beginning of last program.
5. While playing, press V+ to increase the volume. Press V- to decrease the volume.
6. Press to pause or restart the current program.
FM Radio
This unit with FM Scan Radio, Frequency Range: FM 88~108 MHz
1. Press ON/OFF button to turn on the unit. Switch CD/USB-FM-AUX to FM radio mode.
Once the yellow LED indicator is on, the system is entering into radio mode.
2. Manually change program: Press FM SCAN button for 1.5 seconds, the system will
be in manual mode. Users can choose program one by one. Every time users press
FM SCAN button for 1.5 seconds, the system will jump to next radio channel.
3. Auto change program: Gently press FM SCAN button for 0.5 seconds, the system
will scan from FM88 to 108MHz and stop at the most clear radio channel. Every time
users press FM Scan button for 0.5 seconds, the system will do it repeatedly.
4. While playing, press V+ to increase the volume. Press V- to decrease the volume.
AUX Input Device
1. Connect your own device (i.e. MP3 player or IPOD or iPhone) to the AUX IN jack
(located at the back of unit) with stereo 3.5mm plug (packed separately)
2. While playing, press V+ to increase the volume. Press V- to decrease the volume.
3. LED LIGHT ON/OFF SWITCH can switch on or switch off all the LED lights.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before the product
is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should be
adhered to.
4. Follow Instructions - All operating and user instructions should be followed.
5. Cleaning - Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning
6. Attachments - Do not use attachments not recommended by the product manufacturer as they
may cause hazards.
7. Water and Moisture - Do not use the product near water for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in wet basement; or near a swimming pool; and the like.
8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fail, causing serious injury to a child or adult and serious damage to the product.
Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold
with the product. Any mounting of the product should accessory recommended by the
manufacturer.
9. A product and cart combination should be moved with care; quick stops, excessive force and
uneven surface may cause the product and cart combination to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a
built-instruction such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.
11. Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from battery power, or other sources, refer
to the operating instructions.
12. Grounding or Polarization - This product may be equipped with a polarized alternating-current
line plug (a plug having one blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature; if you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug. (FOR USA OR
CANADA ONLY).
13. Power-Cord Protection - Power-supply cord should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cord
at plugs, convenience receptacles and the point where they exit from the product.
14. Protective Attachment Plug - The product is equipped with an attachment plug having overload
protection. This is a safety feature. See Instruction Manual for replacement or resetting or
protective device. If replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the same overload protection
as the original plug.
15. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article S10 of National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes
and requirements for the grounding electrode. See Figure 131.1.
16. Lightning - For added protection for this product during a lightning storm or when it is left
unattended and unused for long period of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lightning and
power-line surges.
4
3


17. Power Lines - An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact with them might be fatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
19. Object and liquid Entry - Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions, adjust only
those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance this indicates a need for service.
22. Replacement Parts - When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
23. Safety Check - Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
25. Heat - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
5