Pyle PAH1 User manual

(E lt
-Art No.:PYLE_SPORTS·
PAH1
PROFESSIONAL
DIGITAL
ALTIMETER
----ALL·in-0NE
• •

FEATURES
Alti meter
-Altitude Range (-500 to 9000 meter1 -1 600 to 29500 feet),
Resolution
of 1 meter 1 1feet
-
Max.' Min. memory for Alti tude
-Al titude History and Graphical display of the last 12 hour
al titude readings
-Alti
tude Alarm
-StopWatch
up to 9 hr59 min 59.9 sec
-Alti tude tota l gain or loss 44999 meter1feet
Barometer
-Pressure Range 300.0 h
Pa 1mbar to 11 00.0 hPa I mbar
(B.B4 inHg to 32.44 inHg)
-
Reso l ution of 0.1 hPa 1 mbar (0.01 inHg)
-Max.I Min. memory
for Pressure
-Pressure Historyand Graphi
ca l display of the last
12 hours pressure readings
- Electronic Pressure Weather Forecast
(Sunny, SlightlyCloudy,Cloudy, Ra iny, Stonn)
-Pressure Trend I
nd icators
Thermometer
-Thermometer(-20·C
to +60·0
- °C, oFselectable
-Max.I Min.memory
for Thennometer
Hygrometer
-
Re lati ve Humidity (20% -95 %)
-Max.I Min. memory
fo r relative humidity
lime Keeping
-
lime: Hr, Min,Sec.
- Ca lendar: Year, Day of Week. Month, Date,
Automatic Calendar
-Alarm: 1
dailya l ann
BATTERY INSTALLATION
Remove the batterycover from the
back of the computer by using a
small coin, Install the 3V battery
(CR2032) with the positive (+) pole
facing the batterycover and close
the cover properly as in Fig. 1.
Fig. 1
Batt o ry
(3V I CR2032 )
DISPLAY ICONS & KEYS ILLUSTRATION
Barometer
Button
Clock Button
Alti
meter
Button
Set Button
•

Icons:
tBlI -Altimeter mode
TOT
-Altitude Tota l
Gain/loss
Ilr:tm - Barometer mode
IEIORI' -Memorymode
e
)) -Altimeter Alert ON
MAX
-Maximum memory
D1
... - Ascending
..
-Minimum memory
• -
Descend i ng
Elm
mb
- Barometer Graphic
:: } Barometer Un"
Display
ft } Altimeter Unit
m
D2
J- :- :- :- :- :
-.-.-.-. .. .
( _:_:_:_:_:- - History
Disp la yWindow
1- : - : ~ : - : - : -
- "- "- "- "- "-
.,... _ ..... ... -1. !Itt
(j1UoDTY
-Humidity
IIAX
• Max i mum memory
D3 Ii
TEMP - T.m~atu r .
.. -Minim um memory
D4 ) ~
- Alarm ON/OFf
m-Clockmod.
1
0 -
Stop Watdl mode
~
!III II II 1I1I/1II/'!11
- Weather Forecast Window
D5
<
~
- Pressure Trend Indicator
-
C.
-Battery low
.......
m ENTER DIFFERENT MODE
. . .
. . .
.:. :. :. :. :.
.. ... -- ....... ..
~ 5B% 1 Illt
:2:3526
E:l~
CLOCK
NORMAL MODE
..
IIllII
to :C.B:
. . . . .
•t.:.:.j.l.
. ._ -----
BAROMETER
NORMAL MODE
...
. _.
. . . . .
.:.: •. :.:.
.. ... _ .... _ .. "-
~ 6D% l i I6.5t
~ anaomJ
t:J~
ALTIMETER
NORMAL MODE

WAKE UP AND SET YOUR COMPUTER
- Press buttonAuntil all segment on or re-insta ll the battery
Altimeter Unit (Meterl Feet) Selection
L Rig ht after all segment on, the Om" digit will start to flicker.
2. To select m (Meter) or ft ( Feet), press button B and then
press button Cto confirm.
Barometer Unit (mb 1hPa/ inHg ) Setting
1. Right afterthe altimeter unitsetting, the' mbf hPa' dig its
will then start to flicker.
2. To select mblhPa orinHg, press button B and then press
button Cto confirm.
Temperature Unit(O CI OF) Setting
1. Right afterthe Barometer Unit setting,the Ce l sius d ig it wi ll
then start to flicker
2. To select Cor F, press button B and then press button C to
confirm.
Clock and Alarm Setting
-T I ME
1. Press button C to Time mode,
p
ress and ho ld button Cuntil
12124 flashing, change to 12 Hrs
or 24 Hrs by press button Band
confirmed by button
C.
2. Cont inui ng to set the correct time
by button B and button C.
I 1:56.3Y I D4
" I /
/ "
m 11 :5 .3Y D4
/ I "
- CALENDER
L Press button Cto ca l enda r
mode, press and hold unt il
04 (Year) flashing, change to
the des i red year by press
button B.
2 Continuing to set the Month
and Da te by button Band
button
C.
3. Theday of week will
automatically calcu lated and
shown up.
-ALARM
1. Press button CtoAl arm mode,
the al
arm clock icon displayat
the left top.
2. Press and ho ld button Cuntil the
Hr digitflashing, press the
button B
and buttonC to set
t he Hour and Minute.
3. After setting the Alarm time,
press button B to activatethe
Al
arm function which a be ll Icon
di
sp l ay ~ at the leftdown
corne r.
4. Press button B again to offthe
Al
arm function.
, I
1M 12 : CCAl l D4
~ .,.:.!. !::.....!::!..!::!!..l.!: :....J D4
/ I '
, ~ , 12:CCAl D4
/ I '

THE BAROMETER
• Press Button Dto enter the
Barometer Mode.
Barometer and Weather
States
Adjustment
1. Toadjust the barometer and
weather states. weather forecast
functi on can have agood
Initialization.
2. Press Button Dto Norma lMode
and then hold Button D again. the
barometerdigits
wi ll start to flicker.
3. Press Button Bto set and then
press Button Dtoconfirm.
4. Repeat Step 3to set your desire
digits.
5.Right after the barometer digits
setting,
press the Button Bto
se l ect different states and then
press Button Dtoconfirm.
Weather Forecast
1. The unit is capable of detecting
atmospheric pressure changes to
pred ictthe weather for the
forthcoming B hours.
2. The weather forecast is meantfor
the next B
hours .It may not
necessarily reflec1 the current
weather situation.
3. The accuracy of a ll genera l
pressure-based technology
weather
forecast is about 70%.
and therefore. cannot be held
responsib lefor any
inconveni ences so caused by an
Inaccurate one .
w "m tm2:
D1
1 E:l~ IDS
4. Accord in g tothe barometric change. the pressure trend will
in di cate the weather is going fine (Fig. 1 UP).
stab le( Fig. 2 Stab l e) a and nd going worse ( Fig. 3Down ).
There are fIVe different states:
Sunny. SlightlyCl oudy, Cloudy, Rainy and Storm
Fig. 1 Fig.2
R R
lBlIEICY
TE' EIIC'f
(Going Fine) ( Stab l e)
Sunny SlightlyCloudy
0:::::- c:::;r-,
iii ii j i I' /'i i
I • I ••
Fig .3 R
TfPEIIC'f
(Going Worse)
Cloudy
co c:::;r-,
'11/ III/II 1111"111 II
""/111 I II ..1,
Rainy Storm

THE BAROMETER
Maximum and Minimum
1. Press Button 0 toenter the
Memory mode.
2. The memory of max imum and
minimum barometerwi
ll be scro ll ed
on the display automatical ly.
3. To reset the memory, press and
hold Button B.At the
same ti me,
the memoryforthe hygrometerand
the thermometerwi
ll be reset al so.
4. Press Button 0 toquitor leftItreturn
automaticallyto
Norma l Mode after
30 seconds .
The Atmospheric
Pressure
Bar Chart
1. Press Button 0 toenter the
Bar Chart Mode
2. The atmospheric pressure chart
records the atmospheric
changes
forthe past 12 hours and it will be
scro ll ed on thedi sp l ay automatica ll y.
•
The history hours are:
o H= Current
•1 H=
Past Ihour
-2 H=
Past 2hours
-3 H=
Past 3hours
-6 H=
Past 6hours
-
12 H= Past 12 hours
3.
To reset the records , press and hold
Button B.
4.
Press Button 0 toquitor leftitretum
automatically to
Norma l Mode after
30 seconds.
_EIOIII'IIAX
r11D '~.6:
L-......:.. =- ..:.......; = ~ 01
tmI EIOIII' liN
f01 90BD: 01
-
O lD ,~:
<= :""":":=-- :""""::= !...l 01
THE ALTIMETER
• Press ButtonAto enter theAltimeter
mode.
Setting theAl titude
1. To keep a cheel< and re-adjust the
altimeter,
it will l ead tothe most
accurate reading.
2. Press Button Ato normal mode
and then hold ButtonAagain, the
altimeterdigits will start to flicker
3.
Press Button Bto set and then
press ButtonAto confirm.
4. Repeat Step 3 to set your desire
digi
ts
Zeroing the Al titude
(Sea -level)
1. To re-setting the height at
sea -l evel, press Button Ato
Normal Mode.
2. Ho ld ButtonA aga in until all digits
are reset to zero .
EIII
01

Maximum and Minimum
1. Press ButtonA to enter the
Memory mode.
2. The memory of maximum and
minimum a lti tude will be scro ll ed
on the di sp lay automat ically.
3. To reset the memory. press and
hold Button B. At the same time.
the
memory for the hygrometer
and
the thermometer will be reset
al
so .
4.
Press Button A to quit or left it
return automatica ll y to Normal
Mode after 30 seconds.
The Altimeter Bar Chart
1. Press ButtonA to enter the
Bar ChartMode.
2. Thealtimeter bar chart records the
altitude changes for the past 12
hoursand It will be scrolled on the
displayautomatically.
•The history hours
are:
oH = Current
- 1H =
Past Ih our
- 2 H= Past 2 hours
- 3 H=
Past 3 hours
- 6 H=
Past 6 hours
-12 H= Past 12 hours
3. To reset the records. press and hold
Button
B.
4. Press ButtonA to quit or left it return
automatically
to Normal Mode after
30 seconds.
10
. . . . .
. . . . .
01
•:.:.:.1.:.
..- - ~ - - - 02
The Total Altitude Displacement
1. Press ButtonA to enter the
A lt imeter Normal Mode.
2.
To starta trip . press Button B to
start the trip timer and t hen the tota l
a
lt itude d is placement wi ll be
recorded automaticall
y.
3. To stopa trip . press Button Baga in
to stop the trip timer and then the
tota lal titude displacement wi ll be
stopped to count
4. To read the TotalAl titude
, I ,
n
I
n
Displacement. press ButtonA to enter the Total Altitude
Displacement Mode and then press Button B to se lect the
tota ldisplacement for the gain (TOT.) orthe l oss ( TOT . ).
5.
Press ButtonA to quit or left it return automatically to Normal
Mode after30 seconds.
Ho;gN o
From0 toO , (the gain TOT.)
Tot al altitude di sp lacement for the gain (TOT.) = dl +d2+d3
From ato e,
(the l oss TOT .. ),
Total altitude di
sp lacement forthe loss (TOT.) =d5+dS+d7
01
01

The Al timeter Alarm
1. Press Button Ato enter the
AltimeterAl
arm Mode.
2. To set the target altitude for the
Al
arm , press and ho ld ButtonAuntil
the digit
starts to flicker.
3. Press Button Bto set thedigits and
then press Button Atoconflrm.
4. Repeat Step 3to set your desire
digits.
5. After setting the target al ti tude, press
Button Bto activate or deactivate
the
alarm .
6.
For theAltimeterAl arm sound, itwi ll
. Beep .. Beep .. Beep for 1minutes
and the UP i con flashing; when
the altitude come across the target
In ascending.
. Beep Beep .. Beep Beep .. Beep
Beep
for 1minutes and the DOWN
icon fl ashing ;when the altitude
come
across the target in
descending.
7. To read the targetaltitude and the
al
arm setti ng, press ButtonAto the
mode
and then press Button Ato
quitor left
it return automatically to
Norma lMode after 30 seconds .
l1li
" I /
IRl
- OFF ~
01
I
mil
III
,n,n
m
fU fU 01
01
IRl nnnnm
l- -=U:",:U:,,:U=U :.......J 01
THE HYGROMETER
1.Abuild-in sensor measure humidity
and shows on the displ ay .
2. To ca ll the Maximum and Minimum
Memory, press Button 0 tothe
mode.
3.
To reset the memory, press and
ho ld Button B.At the same time,
the memoryfor the barometerwi
ll
be reset al so.
The Thermometer
1. Abuild-in sensor measure
temperature and shows on the
di
sp l ay .
2.
To call the Maximum and Minimum
Memory, press Button 0 to the
mode.
3. To reset the memory, press and
ho ld Button B. At the same ti me ,
the memory forthe barometerwi
ll
be reset al so.
...
L......! .&..:::L- ...... -..&.J 03