Pylo Health Weight Scale Plus 300-LTE User manual

version:1.
User Manual
Weight Scale Plus 300-LTE
Thank you for choosing Pylo Health!
This manual outlines how to use your Pylo LTE weight
scale safely and correctly. Please be sure to read it
thoroughly and keep it for future reference.
Distributed By:
www.pylo.com
Pylo Health
28632 Roadside Drive, Ste 215, Agoura Hills, CA 91301
[email protected]

1
Table of Contents
Table of Contents
Overview
Device Components
LCD Display
Initial Start-Up
Start Measuring
Daily Measurement
Troubleshooting
Error Prompt
When Measuring
Specifications
Maintenance
Warranty
4
5
6
6
8
9
10
11
12
12
.................................................................................................................
...................................................................................................................
.............................................................................................................................
..................................................................................................................
............................................................................................................................
...............................................................................................................................
......................................................................................................................................
2
.........................................................................................................................
..........................................................................................
..............................................................................................................................
...................................................................................................................
General Instructions
Batteries and Initial Network Pairing
Selecting Measurement Unit 7
Safety Information
Your Scale and Its Environment
3
.............................................................................................
Efficient Use of Your Scale
3
..........................................................................................................
......................................................................................................
Symbol Meaning
Symbol Meaning
FCC Regulations ...................................................................................................................... 13
Appendix
................................................................................................................................ 14
EMC Guidance
Warning
........................................................................................................................ 14

2 3
Safety InformationSafety Information
The measures weight
network.
It is intended for use in a domestic setting only.
INDICATIONS FOR USE
These warning signs and symbols are essential to ensure your correct and safe use of
this product and to protect you and others from injury. e meanings of
the warning signs and symbols which you may encounter in the label and this user
manual
Symbol Meaning
To ensure your safety as well as the service life of your scale, please avoid using
the scale under the following circumstances:
Near a cell phone or microwave oven
Avoid storage in the following locations:
Where there is water
Where the device may be exposed to extreme temperatures, moisture, direct sunlight,
dust, or salt air
Where there is risk of shock or drop
Where you store chemicals or near corrosive gases
Where in reach of the infants or children
Your Scale and Its Environment
Efficient Use of Your Scale
To ensure the accuracy of measurement, please follow below instructions when
you start measurement.
Place the scale on a flat, hard surface. Soft or uneven surfaces will negatively
affect the safety and accuracy of the scale.
Take your weight measurements around the same time each day.
Avoid measuring immediately after strenuous exercise, sauna or bath, drinking, and
dining.
Avoid measurements immediately after waking up in the morning or within two hours
of eating a moderate or large meal
Any information provided by this scale is in no way meant to treat, cure or prevent any
disease or illness from happening. If in doubt, contact your physician.
Symbol for “THE OPERATION
GUIDE MUST BE READ”
Symbol for “TYPE BF APPLIED
PARTS”
Symbol for “MANUFACTURER” Symbol for “ENVIRONMENT
PROTECTION - Electrical waste
products should not be disposed of
with household waste. Please
recycle where facilities exist. Check
with your local authority or retailer
for recycling advice”
Symbol for “SERIAL NUMBER”
Symbol for “DIRECT CURRENT”
Symbol for “RECYCLE” Symbol for “MANUFACTURE DATE”
SN

4 5
LCD Display
List
1. Weight Scale Plus 300-LTE
2. Four AA-size Batteries (1.5V per each)
3. User Manual
OverviewOverview
Device Components
Kilogram
Stone
Pound
Signal strength symbol
Battery symbol
Data transmitting symbol
LCD Display
Battery Compartment
UNIT Button

7
6
General Instructions When initial pairing succeeds, the symbol “[ ]” will be
shown on the display and the scale is ready to start taking
measurements
If pairing fails, “E1” will be shown on the LCD.
In this case, the scale is not able to connect to the mobile
network. Please try again in a different location (near a
window, if able) before calling customer service.
Initial Start-UpInitial Start-Up
Select Measurement Unit
Inserting Batteries and Initial Network Pairing
Slide open the battery door on the back of the scale.
Insert the batteries (4 x 1.5V AA) into the battery compartment, making sure to insert
each battery following the configuration indicated inside the compartment.
Once the batteries are inserted, the scale will perform an initial secure pairing with the
mobile network. This process normally takes around fifteen seconds, but may take up
to two minutes.
Within the battery compartment you will see a black “UNIT” button. Pressing this button
changes the measurement unit on the scales display. The default measurement unit is
“lb”. Pressing the “UNIT” button cycles through the units pound, kilogram and stone.
CAUTION
When the symbol “ ” and “ Lo” appear, the device does not have enough battery power to function.
To resume function, replace all four batteries with new ones. Do NOT mix old batteries with new ones.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries
and device.
If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries
before storing it.
The Pylo 300-LTE weight scale applies SENSE ON technology that turns the scale on when
someone steps onto it.
Simply lay the scale on a level surface, step onto it and then remain still. It will automatically
turn on, take a weight reading and then send the reading over the mobile network.
You can determine the signal strength from the symbol in the
upper left of the display:
Strong Medium Weak Minimal No Signal
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.

9
8
Start Measuring
It is suggested that you weigh yourself each day at
approximately the same time. Simply step onto the
scale and it will automatically turn on and start taking a
measurement.
Daily Measurement
Stand still and keep full contact with the scale. The display will flash a number
when the weight measurement has been completed. After a few seconds, the
scale will connect and transmit the reading.
When data is successfully transmitted, “oH” will be displayed. If the data transfer fails, “E1”
will be displayed. In this case, the measurement is saved and transmission is reattempted
with the next measurement taken.
Error Prompt
Error Description Solution
Overload error. The
device will power off.
Check to make sure scale
load is under capacity
specifications.
Low battery error. The
device will power off.
Replace all four batteries in the
back of the scale and retry.
1. Move the scale to a place
with stronger signal and retry.
2. Contact customer support.
Failure to pair-up with the
system.
Or Data transmission
error.
Eeprom checks failed. Contact customer support.
Troubleshooting
Signal timeout.
No SIM card information
was found.
1. Reinstall the batteries.
2. Move the scale to a strong
signal place.
Contact customer support.

11
10
Specifications
When Measuring ...
Problem Root Cause Solution
No display on
LCD when the
device powers on.
The device
powers off
automatically.
Batteries not yet installed.
Worn batteries.
Low battery.
Install the batteries.
(Please refer to Inserting the
Batteries and Initial Pairing)
Replace all four batteries at
the same time.
Replace all four batteries at
the same time.
Troubleshooting
Weight Scale Plus
6V (Four AA-size Batteries)
About 10 seconds while showing 0.0;
1. Four AA-size Batteries
11lb to 551.2lb / 5kg to 250kg / 0st:11lb to 39st: 5lb
About the Accuracy of This Product
This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer.
Please refer to the above table for the descriptions on accuracy.
This product is specially designed for body weight measurement. It should NOT be used by anyone for verification
or measurement of any other object. Do not use this scale to measure weight for transactions or trade.
Scale: Approx. 360x360x37.2mm
Approximately 3.04kg ( Excluding the dry cells)
±(‰2+1d)
Specifications
Product Name
Dimension
Net Weight
Display Digital LCD
Measurement Unit Pound / Kilogram / Stone
Measurement Range
Division
Accuracy
Working Environment
Storage Environment
Power Source
Auto-ON SENSE ON technology
Auto-OFF
Accessories 2. User Manual
Mode of Operation Continuous Operation
Temperature: 5℃to 40℃
Temperature: -20℃to 60℃Relative Humidity: ≤90% RH
Atmospheric pressure: 86kPa to 106kPa
Atmospheric pressure: 50kPa to 106kPa
Relative Humidity: ≤90% RH
Protection Against
Ingress of Water IP22
Degree of protection Type BF applied part
0.1kg / 0.2lb

1312
Maintenance
When carrying out usual maintenance, please ensure practice of the following Do’s and
Don’ts:
Maintenance
DO use a soft dry cloth for routine cleaning of the device.
DO use a lightly moist cloth for cleaning the device when needed but do not use
soap or detergent. Use a soft dry cloth immediately afterwards to dry the device.
DON’T wash the device with water or immerse it in water.
DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of
discolor or malfunction.
DON’T disassemble this device. If you have any problems, please contact Pylo
Health. (Please refer to Warranty for contact information)
Warranty
Pylo warrants its products free of defects in materials and workmanship in normal use for
a period of one year from the date of retail purchase.
This warranty does NOT cover damages caused by misuse or abuse, including but not
limited to:
Failure caused by unauthorized repairs or modifications;
Damage caused by shock or drop during transportation;
Failure caused by improper operation inconsistent with the instructions stated in this user
manual;
Malfunction or damage from failure to provide the recommended maintenance;
Damage caused by improper use of power supply.
Should this device require maintenance (or replacement at our option) under warranty,
please contact Pylo Health at the information below with your purchase receipt
information and device defect information to obtain a return authorization.
PYLO HEALTH
28632 Roadside Drive, STE 215, Agoura Hills, CA 91301
Tel: [phone]
Website: http://www.pylo.com/support
FCC User Guide Information
Radio Frequency Interface Requirements - FCC
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
Consult the dealer or an experienced radio / TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
FCC Regulations
FCC Regulations

15
14
Appendix Appendix
EMC Guidance
Guidance and manufacturer’s declaration -electromagnetic emissions and Immunity
Table 1
Guidance and manufacturer’s declaration - electromagnetic emissions
Emissions test
Compliance
RF emissions
CISPR 11
Group 1
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
Not applicable
Table 2
Guidance and manufacturer’s declaration - electromagnetic Immunity
Immunity Test
IEC 60601-1-2
Test level
Compliance level
Electrostatic discharge (ESD)
IEC 61000-4-2
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15 kV air
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15 kV air
Electrical fast transient/burst
IEC 61000-4-4
Not applicable
Not applicable
Surge
IEC 61000-4-5
Not applicable
Not applicable
Voltage dips, short
interruptions and voltage
variations on power supply
input lines
IEC 61000-4-11
Not applicable
Not applicable
Power frequency magnetic
field
30 A/m
50Hz/60Hz
30 A/m
50Hz/60Hz
IEC 61000-4-8
Conducted RF
IEC61000-4-6
Not applicable
Not applicable
Radiated RF
IEC61000-4-3
10 V/m
80 MHz – 2,7 GHz
80 %AM at 1 kHz
10 V/m
80 MHz – 2,7 GHz
80 %AM at 1 kHz
NOTE U
T
is the a.c. mians voltage prior to application of the test level.
Warning
The Pylo 300-LTE weight scale is suitable for home healthcare environments.
Warning：Don’t near active HF surgical equipment and the RF shielded room of an ME
system for magnetic resonance imaging, where the intensity of EM disturbances is high.
Warning：Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is necessary, this
equipment and the other equipment should be observed to verify that they are operating
normally.
Warning: Use of accessories, transducers and cables other than those specified or
provided by the manufacturer of this equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this equipment and result in improper
operation.”
Warning：Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than 30 cm (12
inches) to any part of the equipment, including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment could result.

16
Table 3
Guidance and manufacturer’s declaration - electromagnetic Immunity
Radiated RF
IEC61000-4-3
(Test specifications
for ENCLOSURE
PORT IMMUNITY to
RF wireless
communications
equipment)
Test
Frequency
(MHz)
Band
(MHz)
Service
Modulation
Modulation
(W)
Distance
(m)
IMMUNITY
TEST
LEVEL
(V/m)
385
380 –
390
TETRA 400
Pulse
modulation
18 Hz
1,8
0.3
27
450
430 –
470
GMRS 460,
FRS 460
FM
± 5 kHz
deviation
1 kHz sine
2
0.3
28
710
704 –
787
LTE Band
13,
17
Pulse
modulation
217 Hz
0,2
0.3
9
745
780
810
800 –
960
GSM
800/900,
TETRA
800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse
modulation
18 Hz
2
0.3
28
870
930
1720
1 700 –
1 990
GSM 1800;
CDMA
1900;
GSM 1900;
DECT;
LTE Band
1, 3,
4, 25;
UMTS
Pulse
modulation
217 Hz
2
0.3
28
1845
1970
2450
2 400 –
2 570
Bluetooth,
WLAN,
802.11
b/g/n,
RFID 2450,
LTE Band 7
Pulse
modulation
217 Hz
2
0.3
28
Appendix