Pyramat S2500-W User manual

Owner’s Manual
Read and understand this entire manual before using!
For assistance contact Pyramat. DO NOT RETURN TO STORE.
S2500-W
Wireless Sound Rocker
Item Number:
10174502

WARNING: The Pyramat Sound Rocker is intended for indoor use only. TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• Do not expose to direct sunlight or extreme temperatures.
• Adult supervision is required for set-up.
• Use only with the supplied power adapter. The power adapter is not a toy.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)
batteries.
• Excessive use of audio equipment at high volume may lead to hearing loss. Listen responsibly and use
common sense.
• Children under 13 should not use this product without parental supervision.
• DO NOT wash or soak the Sound Rocker with water. If cover becomes wet, disconnect power immediately and
don’t use until totally dry.
• To avoid injury or death from electrical shock, NEVER open the electrical cabinet or remove the cover.
The Sound Rocker is compatible with:
• All gaming consoles (including Xbox 360®, Wii™ and Playstation 3®)
• iPod® and all other MP3 players
• TVs, DVDs, VCRs
• Portable gaming devices (including Nintendo DS®, Nintendo DS Lite®, and PSP®)
SAFETY WARNINGS
1
Need Help? Visit our website at www.pyramat.com, send an e-mail to [email protected]
or call toll-free at 877-591-1012.
CONTENTS
Congratulations on the purchase of your Pyramat S2500-W Wireless Sound Rocker. The Sound Rocker is a
comfortable, rockable chair that delivers a powerful audio experience designed to intensify your enjoyment of games,
movies, music and more. To ensure the best results, please read this manual completely before operating your Sound
Rocker, and retain it for future reference.
Safety Warnings ............................................................ 1
Before You Begin........................................................... 2
Features......................................................................... 2
Sound Rocker Set-Up .................................................... 3
Wireless Transmitter Set-Up ......................................... 4
Wireless Connection Methods ...................................... 5
Direct Connection Methods ....................................... 6-7
Direct Multi-User Connection ....................................... 8
Portable Audio/Handheld Game Device Connection ..... 8
Troubleshooting ............................................................. 9
Warranty ...................................................................... 10
FCC Content................................................................ 11

Remove the foam separators from the Sound Rocker and take unit out of box.
Check to make sure you have all the parts shown below and that all items are in good condition.
BEFORE YOU BEGIN
2
11 ft. male to female
RCA audio cable
9 ft. 12-volt DC power adapter
Wireless transmitter
FEATURES
SOUND FURNITURE
Control panel
Volume/power knob
Twist to click on and power up
and adjust the volume level.
Bass knob
Twist to adjust the bass to your
preference.
MP3 pocket
Illuminating
speakers
Source knob
Select IN for direct connections to
the control panel.
Select Wfor wireless transmission.
Select MP3 for MP3 and portable
CD/DVD player connections to the
MP3 and portable CD/DVD player plug.
Multi-player RCA audio output ports
Connect up to four Sound Rockers together for multi-user fun.
Input RCA audio ports
Connect red and white RCA audio cable here from game
consoles, home theater, satellite receiver and stereo receiver.
Headphone port
Connect headphones here.
Channel selector button
Select the same channel as the transmitter by
pressing the channel selector button.
Power DC port
Connect supplied 12-volt power adapter here.
CAUTION: Keep
fingers clear of the folding seam
when opening the unit.
Note: Replacement cables and mini
adapters can be purchased at your
local audio accessory dealer or at
www.pyramat.com.
MP3 and portable CD/DVD
player plug
RCA to mini audio cable
AAA 1.5 Volt batteries
(Not included)

SET-UP
1Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
Secure velcro tab on the bottom
of the rocker.
2Place the Sound Rocker so
that the control panel is less than
9 ft./2.75 meters from the power
source.
3Connect the power adapter to
the power DC port on the control
panel. Then, plug the power
adapter into an electrical outlet.
4Twist the volume knob on
the control panel to click on the
power.
5Check the speakers on top to
see if the Pyramat logo is lit up.
Twist volume knob to power off the
Sound Rocker, then proceed to the
connection method shown below
for your audio/video device.
9 FEET OR LESS
1
2
3
4
5
6
7
8
3
CAUTION: Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.

4
WIRELESS TRANSMITTER SET-UP
4Select the same channel as the
transmitter on the Sound Rocker’s
control panel by pressing the chan-
nel button. Example: 1–1, 2–2
or 3–3. To add multiple Sound
Rockers, simply select the same
channel on each rocker.
Note: Both the transmitter and
control panel must be on the same
channel to hear sound.
1
2
3
4
5
6
7
8
6Twist the volume knob on
the control panel to click on the
power.
5Turn the source knob on the
control panel to W.
WARNING: Do not
mix old and new batteries. Do not
mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium)
batteries.
1Remove the casing and insert
2 AAA batteries (batteries not
included).
2Turn the power switch on the
front of the transmitter to the “on”
position
3Press the channel button to
select the desired transmitter
channel. Eight channels are
available for the best quality
reception. If you experience
static or poor reception, try
another channel.

WIRELESS CONNECTION METHODS
Video Game Console Connection
XBOX 360®, PLAYSTATION 2®, PLAYSTATION 3®, GAMECUBE® AND OTHERS
There are four types of audio/video cables that come with video game consoles:
1. Standard AV/RCA Cable 2. S-Video AV/RCA Cable
(red, white–audio; yellow–video) (red, white–audio; yellow, black–S-video)
3. High Definition AV/RCA Cable 4. Coaxial Connection
(red, white–audio; yellow, blue, red, green–video)
Audio/Video Device Connection
TV, DVD PLAYER, VCR, SATELLITE RECEIVER, STEREO
1 RCA Audio Cable Connection
For standard AV/RCA Cable, S-Video AV/RCA Cable and High Definition AV/RCA Cable
Connect the supplied RCA to mini audio cable to the red and white audio cable from the video game console. Follow the instructions from the video game
console’s manufacturer to connect the yellow video cable to your television.
OR
1 Coaxial Cable Connection
If your video game console has a coaxial cable instead of an RCA audio cable, then use the instructions provided by the video game console’s manufacturer to
hook up the video game console through an intermediary device (such as a TV, DVD, VCR, satellite receiver, etc.). Your intermediary device must have both a
coaxial input jack (the standard jack for cable TV) and an RCA audio output jack, or you can purchase an RCA replacement cable directly from the console manu-
facturer. Then follow the audio/video device connection instructions below to connect your Sound Rocker.
VIDEO
GAME
CONSOLE
TV
AUDIO
OUTPUT
TV
DVD
VCR
SATELLITE
RECEIVER
STEREO
RedRed
WhiteWhite
Yellow
Red
Red
White
White
5
(single black cable)
If you have this cable, you need to purchase the
RCA audio cable from the console manufacturer or
electronics retailer. Or, you can connect the Sound
Rocker through an intermediary audio source such as a
TV, DVD, VCR, etc. (see below).
The yellow RCA video cable
connects to the VIDEO INPUT
jack on the TV. Refer to the
instructions from the video
game console’s manufacturer
to connect any other video
cables to your TV.
1Connect the supplied RCA to mini audio cable to the red and white RCA audio cable included with your Sound Rocker. Connect the other end of the RCA
audio cable into the red and white AUDIO OUTPUT connection on your audio/video device. Connect the RCA to mini cable into the wireless transmitter.
Note: Connection must be made to an AUDIO OUTPUT source. The red and white audio connections on the front of most devices are AUDIO
INPUT. SOUND WILL NOT PLAY FROM AN AUDIO INPUT SOURCE.

DIRECT CONNECTION METHODS
If you experience static or poor reception from your wireless connection in your location, you may need to select one of the direct connection
methods below to ensure the best possible sound quality.
Yellow video cable
VIDEO
GAME
CONSOLE
Video Game Console Connection Cables
XBOX 360®, PLAYSTATION 2®, PLAYSTATION 3®, GAMECUBETM and others
There are five types of audio/video cables that come with video game consoles:
1. Standard AV/RCA Cable
(red, white–audio; yellow–video)
2. High Definition AV/RCA Cable
(red, white–audio; yellow, blue, red, green–video)
3. S-Video AV/RCA Cable
(red, white–audio; yellow, black–S-video)
3. Coaxial Cable
(single black cable)
5. HDMI Cable
(single cable)
AV/RCA Cable Connection
For standard AV/RCA cable, high definition AV/RCA cable and S-Video AV/RCA cable.
2Connect the RCA audio cable
from the video game console to the
female end of the RCA audio cable.
1Follow the instructions from
the video game console’s manufac-
turer to connect the video cable(s)
from your video game console to
your television.
Note: Depending on your
connection, there may be more
than one video cable from your
video game console.
Note: If you have a coaxial cable
or HDMI cable, you will also need
to purchase a male to male RCA
audio cable from the console
manufacturer or electronics retailer.
VIDEO
INPUT
1Turn the source knob on the
control panel to IN.
Male to female RCA audio cable
3Connect the male end of the
RCA audio cable to the AUDIO IN
port on the control panel.
6

DIRECT CONNECTION METHODS
AUDIO
OUTPUT
Audio/Video Device Connection
TV, DVD PLAYER, VCR, SATELLITE RECEIVER, STEREO
Note: Connection must be made to an AUDIO OUTPUT source. The red and white audio connections on
the front of most devices are AUDIO INPUT. SOUND WILL NOT PLAY FROM AN AUDIO INPUT SOURCE.
HDMI Cable and PS3®Connection
HDMI cable is for high definition and transfer both audio and video from the source to the TV. If you are using an HDMI cable with your PS3 you
can use the HDMI connection for High Definition Video and use the AV/RCA Cable for audio.
1Connect a male to male RCA
audio cable (not included) to
the audio/video device’s AUDIO
OUTPUT source.
TV
DVD
VCR
SATELLITE
RECEIVER
STEREO
PS3®VIDEO
GAME
CONSOLE
HDMI cable
HDMI CABLE
INPUT
1Follow the instructions from
the PS3®to connect the HDMI
cable from your video game con-
sole to your television.
2Connect the RCA audio cable
from the video game console to the
female end of the RCA audio cable.
4On your PS3®system menu go
to Settings>Sound Settings>Audio
Output >Settings>Select Audio
Input Connector or AV Multi. The
audio will now play through the
RCA Cables and the TV will still
have High Definition.
2Connect the male to male RCA
audio cable (not included) from the
audio/video device to the AUDIO
IN port on the control panel.
You will need
male to male RCA cables
(not included)
VIDEO
GAME
CONSOLE
Coaxial cable
You will need
male to male RCA cables
(not included)
Coaxial Cable Connection
If you have a coaxial cable, you will also need to purchase a male to male RCA audio cable from an electronics retailer.
2Connect the male to male
RCA audio cable (not included) to
the AUDIO IN port on the control
panel.
1Follow the instructions from
the video game console’s manufac-
turer to connect the coaxial cable
from your video game console to
your television.
COAXIAL CABLE
INPUT
AUDIO
OUTPUT
3Connect the male end of the
RCA audio cable to the AUDIO IN
port on the control panel.
Male to female RCA audio cable
Note: If you do not have an audio output on your TV you will need to
purchase an AV/RCA cable from the video game console manufacturer or
electronics retailer to replace the coaxial cable.
7

8
AUDIO
OUTPUT
1After connecting one Sound Rocker to an audio/video device, you can connect additional Sound Rockers together. Connect a male to male RCA audio
cable (not included) to the multi-player connection on the first Sound Rocker and then to the AUDIO IN port on the second Sound Rocker. Repeat to add
up to four Sound Rockers.
DIRECT MULTI-USER CONNECTION
Connect up to eight sound rockers together for multi-user fun!
You will need
male to male RCA cables
(not included)
VIDEO GAME
CONSOLE
TV
DVD
VCR
SATELLITE
RECEIVER
STEREO
2Slip your player into the MP3
pocket on the side of the Sound
Rocker.
SOUNDFURNITURE SOUND FURNITURE
SOUNDFURNITURE SOUND FURNITURE
3Connect the device to the
Sound Rocker with the 3.5mm mini
plug from inside the pocket.
Note: If your handheld game
device does not have a headphone
jack it is not compatible with the
Sound Rocker.
1Turn the source knob on the
control panel to MP3.
CAUTION: Power
off all audio/video devices prior to
proceeding with the Sound Rocker
connection method.
Use the 3.5mm mini plug to connect to an MP3 player, an iPOD®, or a handheld game
device such as Nintendo DS®, Nintendo DS Lite®, PSP® and portable CD/DVD players.
PORTABLE AUDIO/HANDHELD GAME DEVICE
CONNECTION

Unable to hear sound.
Transmitter power light
does not light up.
Static is interfering with
the sound.
Sound Rocker does not
turn on.
Unable to connect to the
gaming console.
Sound only plays from one
speaker.
Speaker does not light up
Sound Rocker plays sound
from one source but not
another.
Missing or broken cables
or mini adapters.
Missing or broken power
adapter.
Broken Knob
Cable connector breaks in
control panel
The RCA audio cables are not connected
properly.
Transmitter and/or Sound Rocker power is
not on.
Different channels are selected on the
transmitter and control panel.
The source knob on the control panel is in the
wrong position.
The batteries are old or not installed properly.
Radio wave interference.
The AC power adapter is disconnected from
the electrical outlet or the electrical outlet
has no power.
Your video game console has a coaxial cable
instead of an RCA audio cable.
The yellow RCA video cable is not connected
properly.
The RCA audio cables are not connected
properly.
Audio/video device has a single MONO audio
output (a common problem when connecting
to an older TV or VCR).
Broken speaker.
Broken speaker
The source knob on the control panel is in the
wrong position.
The RCA audio cables are not connected
properly.
Check the connection on your audio/video device. The RCA cables should be
connected to the AUDIO OUTPUT jacks. Check the connection on your rocker.
The RCA cables (red and white) must be in the AUDIO INPUT ports.
Check to make sure transmitter power is on and the power knob on the
Sound Rocker is on with the volume turned up.
Check to make sure that both the wireless channel on the transmitter and
the control panel are on the same: 1–1, 2–2 or 3–3.
Turn knob to W (wireless) or IN (direct connection) for video games and
audio/video devices. Turn knob to MP3 for MP3 and portable CD players.
See page 2 for the correct knob position for the device you are playing.
Check to make sure the batteries in the transmitter are working. Power light
on the transmitter should be on when batteries are installed correctly and
have a full charge.
Try switching both the transmitter and the control panel to another channel.
If you have tried all eight channels and are still hearing interference, your
location has too many radio waves and the Sound Rocker will need to be
plugged in directly through the RCA cables.
Check the plug on the AC power adapter. If the Sound Rocker still doesn’t
power up, try another electrical outlet.
Use the instructions provided by the video game console’s manufacturer to
hook up the video game console to an intermediary device (such as a TV,
DVD, VCR, satellite receiver, etc.). Your intermediary device must have
both a coaxial input jack (the standard jack for cable TV) and an RCA audio
output jack.
Purchase an RCA replacement cable directly from the console manufacturer.
The yellow RCA video cable connects to the VIDEO INPUT jack on the TV.
Refer to the instructions from the video game console’s manufacturer to
connect any other video cables to your TV.
Check that all RCA audio connections are correct–red to red, white to white.
If your audio source is mono only, as found mainly on older model TVs and
VCRs, an RCA “Y” adaptor (1 male to 2 male, not included) is needed to send
the signal to both Pyramat speakers. Please note: the use of this type of
adapter will not produce a true stereo sound. For optimal performance, it is
recommended that you connect your Sound Rocker to stereo outputs only.
Contact Customer Service for replacement.
Contact Customer Service for replacement.
Turn knob to W (wireless) or IN (direct connection) for video games and audio/
video devices. Turn knob to MP3 for MP3 and portable CD/DVD players. See
page 2 for the correct knob position for the device you are playing.
Check that all RCA audio connections are correct–red to red, white to white.
Replace items immediately. Replacement cables and mini adapters can be
purchased at your local audio accessory dealer.
Replace immediately with an authorized Pyramat power adapter. Do not use
the unit until the damaged power adapter has been replaced.
Contact Customer Service for replacement.
Contact Customer Service for replacement.
Problem Possible Cause Solution
Need Help? Visit our website at www.pyramat.com, send an e-mail to [email protected]
or call toll-free at 877-591-1012.
9
TROUBLESHOOTING GUIDE

WARRANTY
Pyramat warranties this product and any included
accessories against defects in material and
workmanship for a period of 90 days from the date of
rst consumer purchase. This warranty is enforceable
only by the original purchaser. ALL DAMAGED OR
MISSING PARTS MUST BE REPORTED WITHIN 14
DAYS OF PURCHASE.
This warranty covers all defects in materials and
workmanship, but DOES NOT COVER the following:
1. Damage, deterioration or malfunction resulting from:
a. Acts of God, accident, misuse, abuse, negligence,
improper installation, maintenance or operation, or
failure to follow the instructions contained in this
manual.
b. Any shipment of the product (claims must be
presented to the carrier).
c. Repair, attempted repair or modication by anyone
other than the Pyramat Service Center.
2. Any unit which has been altered or on which the
serial number has been defaced, modied or removed.
3. Any unit used for industrial or commercial purposes.
4. Products sold AS IS or WITH ALL FAULTS, or
consumables (such as fuses or batteries).
5. Customer installation, set-up, adjustments or signal
reception problems.
Pyramat will repair or replace (at its discretion) units
covered by this warranty, without charge to the
consumer for labor or materials. CONSUMER IS
RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL
CHARGES AND ANY INITIAL SHIPPING CHARGES.
However, we will pay the return shipping charges to
any destination within the United States if repairs are
covered by the warranty.
S2500-W Wireless Sound Rocker Limited Warranty
REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. PYRAMAT SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTIES, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE LENGTH OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or allow limitations
on how long an implied warranty lasts, so the above
limitations may not apply to you.
TO OBTAIN WARRANTY SERVICE
For service assistance, product information, or to locate
the dealer nearest you, please call or write:
Pyramat Service Center
877-591-1012
[email protected]
For further information on how to order accessories for
this product or other Pyramat products, please visit our
website at www.pyramat.com.
IMPORTANT
For your records, save your original sales receipt with
this manual.
––––––––––––––––––––––––––––––––––––––––––––––––––
10

11
Printed in China for:
Pyramat LLC
PO Box 3610
Cerritos, CA 90703
© Copyright 2006 Pyramat LLC 08162007
If you have problems with your Sound Rocker,
DO NOT RETURN TO STORE.
Follow instructions in this manual.
Failure to follow these instructions may damage
your Sound Rocker and void your warranty.
Need Help? Visit our website at www.pyramat.com, send an e-mail to [email protected]
or call toll-free at 877-591-1012.
FCC part 15.21:
WARNING : Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC part 15.105:
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CONTENT