Q Garden QG500ELT User manual

500W Electric
Line Trimmer
Model No: QG500ELT
Product No: 1938278001
ASSEMBLY REQUIRED
SAVE THESE INSTRUCTIONS
Please read & understand this manual, paying attention to the safety instructions, before use.
Incorrect use of the product could put the operator or machine in danger.
Whilst every effort has been made to ensure the accuracy of information contained in this
manual, our policy of continuous improvement determines the right to make modifications
without prior warning.
Images used are for illustration purposes only.
INSTRUCTION MANUAL

Copyright Notice
Copyright © Handy Distribution
Permission is granted to reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written
permission from Handy Distribution.
In all cases this copyright notice must remain intact.

CONTENTS
SPECIFICATION
IMPORTANT INFORMATION
GENERAL SAFETY INSTRUCTIONS
KNOW YOUR MACHINE
ASSEMBLY
OPERATION
MAINTENANCE & STORAGE
TROUBLE SHOOTING
PARTS DIAGRAM & LIST
DECLARATION OF CONFORMITY
WARRANTY
If you require any assistance with regards to the contents or operation of your machine,
please call the Studio Customer Service phone number 0371 200 0378.
(Lines are open 8am - 8pm Monday to Friday & 9am to 5pm Weekends.)
SPECIFICATION
The manufacturer reserves the right to change the product specification and livery
according to continued product improvements.
Model
QG500ELT
Product Number
1938278001
Voltage
220-240V, 50Hz
Power
250W
Speed
10000 min-1
Working Width
300 mm
Trimmer Line Diameter
1.6 mm
Guaranteed Noise Power Level (LWA)
96 dB(A)
Vibration (ahv)
2.63 m/s2- uncertainty K: 1.5 m/s2
Net Weight
3.0 kg
Consistent with our policy of continuous improvement, QGARDEN reserves the right to
change the design and configuration of any of its products without notice or obligation.
Therefore, please treat the text and images in this manual as being for illustrative purposes
only. They may in no case serve as a basis for any legal claim.
If you require assistance with regards to the contents or operation of the machine, please
contact us:
Tel: [phone]
Email: [e-mail]
Opening hours weekdays:
February to October 8:30am - 5:30pm
November to January 8:30am - 5:00pm
(Closed Bank Holidays)

IMPORTANT INFORMATION
WARNING
Read this instruction manual carefully before operating this machine. Make sure that you are
familiar with the controls and properly operate the machine. Following these instructions can
reduce the risk of fire, electric shock and personal injury.
IF NOT USED PROPERLY THIS MACHINE CAN BE DANGEROUS!
This machine can cause serious injury to the operator and others, the warning and safety
instructions must be followed to ensure reasonable safety and efficiency in using this product.
The operator is responsible for following the warning and safety instructions in this manual
and on the machine. Never use the product unless the grass box or guards are correctly
positioned.
DESIGNED FOR DOMESTIC USE ONLY.
This machine is to be used exclusively for cutting natural grass edges of domestic lawns and
gardens. Never use the line trimmer for other purposes. Any other use can endanger your
safety and can involve damage to the line trimmer. Persons under 16 years of age and
persons who are not familiar with the user instructions must not use the machine.
The user is responsible for the safety of other people in the working area. Keep children and
domestic animals at a safe distance while the line trimmer is in use.
Before using, remove all foreign objects from the lawn edges which may be thrown by the
machine, stay alert for any foreign objects which may have been missed.
These operating instructions must be kept and referred to in order to ensure that the
equipment is properly used and maintained. The instructions contain valuable information on
operating, maintenance and servicing conditions.
TRAINING
Read the instructions carefully: Be familiar with the controls and the proper use of the
equipment.
Never allow children or people unfamiliar with these instructions to use the product. Local
regulations can restrict the age of the operator.
Never operate while people, especially children, or pets are nearby.
Keep in mind that the operator or user is responsible for accidents or hazards involving the
machine that occur to other people or their property.
WARNING
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse.
The user/operator and not the manufacturer will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or
industrial applications.
Our warranty will be 90 days from the original date of sale for commercial, trade or industrial
businesses or for equivalent purposes.

GENERAL SAFETY INSTRUCTIONS
It is important that you read and understand the owner’s manual and labels affixed to the
machine. Learn its application and limitations as well as the specific potential hazards. Retain
these instructions for future reference. The operator is responsible for following the warnings &
instructions in this manual and on the product.
Read & understand operator’s
manual before using the
machine. Failure to follow
instructions could result in death
or serious injury.
Please keep in a safe place for
future reference.
Always wear eye
and ear protection
Keep all bystanders & animals
away from the machine during
operation. If approached, stop
the machine immediately.
SHARP ROTATING BLADES
Always wear gloves to protect your
hands.
Before working or undertaking
any servicing or cleaning of the
machine, ensure the electrical
cable is removed from the
power source.
Wear foot protection or sensible
shoes when using the machine
WARNING
Remove the plug from the
power source immediately if
the cable is damaged or cut.
Do not expose to rain or damp
conditions.
Keep guards in place and in
working order. Replace
damaged, missing or failed
parts before using it.
Moving Parts
Rotating parts can contact or
entangle hands, feet, hair, clothing
or accessories.
Traumatic amputation or severe
laceration can result
Class II
This
Safety alert symbol. Used to alert you
to potential personal injury hazards.
Obey all safety messages that follow
this symbol to avoid possible injury.
DANGER
Indicates an imminently
hazardous situation which, if not
avoided, will result in serious
injury
WARNING
Indicates a potentially hazardous
situation which, if not avoided,
could result in serious injury
CAUTION
Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION
Used without the safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
CE Marking - the product meets
demand and regulations set by
the EU
Noise Level - See label on machine
According to the European directive 2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national law, electrical and electronic equipment
that are no longer usable must be collected separately and disposed of in an
environmentally correct manner.

GENERAL SAFETY RULES
Before you put the machine into operation, you must read this instruction manual.
When using this machine, observe the following safety instructions to exclude the risk of
personal injury or material damage. Please also observe the special safety instructions in the
respective chapters. Where applicable, follow the legal directives or regulations for the
prevention of accidents in relation to the use of this machine.
WARNING
When using electric tools, basic safety precautions, should always be followed to reduce the
risk of serious personal injury and/or damage to the unit.
DANGER
Danger from contact with live parts!
Immediately disconnect the plug from the mains if the extension lead is damaged or
severed!
TRAINING
The operator must receive proper training in the use, adjustment and operation of the
machine, including prohibited operations.
1. Read the instructions carefully. Be familiar with the controls & proper use of the
equipment. Spend time to familiarise yourself with your machine before each use.
2. Never allow children or people unfamiliar with these instructions to use the machine.
Local regulations can restrict the operator age.
3. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the machine by a
person responsible for their safety.
4. Never work while people, especially children, or pets are nearby.
5. The operator or user is responsible for accidents or hazards occurring to other people or
their property.
ELECTRIC SAFETY
1. The domestic mains voltage must match the mains voltage specifications in the technical
data; do not use any other supply voltage.
2. The fuse must be a residual current circuit- breaker with a measured residual current of no
more than 30 mA.
3. Ensure any extension leads used with this product, meets the minimum requirements of
the machine and is suitable for outside use.
4. Damaged or brittle machine cables or extension leads must not be used.
5. Always check the condition of your cable or extension lead before operating the
machine.
6. Always keep cable & extension lead out of the cutting area and routed away from the
machine.
7. Never run over the cable or extension lead with the line trimmer.
8. Protect the machine against moisture.

SAFETY INSTRUCTIONS FOR WORKING WITH YOUR LINE TRIMMER
1. Operate in daylight or good artificial lighting. If possible, do not use on overly wet ground.
2. Ensure good stability on slopes. Always operate across the slope, never up and down.
3. Be particularly careful if changing direction of travel on the slope.
4. Do not operate on steep slopes.
5. Operate whilst walking, do not run.
6. Be particularly careful when you turn or when you pull the machine towards you.
7. Stop the motor and blade, if it is to travel across other areas or must be transferred
to/from working area.
8. Never use the machine with damaged safety protection guards.
9. Do not change the motor regulation set up.
10. Carefully start the motor. Keep your feet clear of the blade.
11. Never reach behind or under the rotating parts with hands or feet.
12. Never lift or carry the machine other than when in operation mode, while the motor is on.
13. Switch the motor off and remove electrical plug from the power source, before
unblocking or removing obstacles from the blade or guard:
−Before releasing blockages, inspecting, cleaning or working on the machine.
−After hitting an obstruction. Search for damage on the machine & make repairs as
necessary. If the machine starts vibrating unusually, it should be inspected by an
Approved Service Dealer.
WORK AREA
1. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
2. Check the landscape where the machine will be used and remove all objects such as
stones, toys, sticks and wires, which could be caught and thrown away from the work
area. Damage of the machine or operator’s injury could be caused.
3. Do not operate this machine in explosive atmospheres, in the presence of flammable
liquids, gases or dust. Machines create sparks which may ignite the dust or fumes.
4. Keep children & bystanders away while operating the machine. Distractions can cause
you to lose control.
PERSONAL SAFETY
1. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the machine by a
person responsible for their safety.
2. Children should be supervised to ensure that they do not use or play with the machine.
3. Stay alert, watch what you are doing, use common sense when operating the machine.
4. Do not use this machine while you are tired, ill or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating this machine can cause you to lose
control & may result in series personal injury.
5. Do not overreach. Always keep proper footing and balance. This enables better control
of the tool in unexpected situations.
6. Remove any adjusting tools before turning the machine on. A tool that is left attached to
a rotating part of the machine may result in personal injury.
7. Use safety equipment. Always wear eye protection. Safety equipment such as a dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
condition will reduce personal injuries.
8. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing & gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts. Wear foot protection or sensible shoes when using the machine.
9. Prolonged use of the machine may lead to disorders of blood circulation in hands
caused by vibration. These effects can be worsened by low ambient temperatures
and/or by gripping the handgrips excessively tightly. Period of use you can extend with
appropriate gloves or regular breaks. Take frequent work breaks. Limit the amount of
exposure per day.

10. Do not force the machine. Use the correct machine for your application. The correct
machine will do the job better and safer at the rate for which it was designed.
11. Do not use the machine if the trigger levers do not work to turn the machine off. Any
machine that cannot be controlled with the trigger levers is dangerous and must be
repaired.
1. Turn machine off completely and the electrical plug removed from the power source
before making any adjustments, changing accessories, or storing. Such preventive safety
measures reduce the risks of starting the machine accidentally.
2. Store idle machines out of the reach of children and do not allow persons unfamiliar with
the machine or these instructions to operate. Electric machines are dangerous in the
hands of untrained users.
3. Maintain your machine. Check for misalignment or binding of moving parts, breakage of
parts & any other condition that may affect the operation. If damaged, have the
machine repaired by an Approved Service Dealer immediately. Many accidents are
caused by poorly maintained machines.
4. Use the machine, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of electric machine, taking into
account the working conditions and the work to be performed. Use of the machine for
operations different from intended could result in a hazardous situation.
PERSON PROTECTION
1. In case of any injury, always proceed in accordance with the principles of first aid.
2. If someone is cut, cover the wound with a clean cloth & press hard to stop the flow of
blood.
3. Individuals with poor circulation who are exposed to excessive vibration may experience
injury to blood vessels or the nervous system. Vibration may cause the following symptoms
to occur in the fingers, hands or wrists: numbness, tingling, pain, stabbing sensation,
alteration of skin colour or of the skin. If any of these symptoms occur, see a doctor.
Put safety first in the case of fire:
4. If fire comes from the motor appears, at first distance yourself from the product to ensure
your physical safety.
5. Use a dry powder fire extinguisher on the fire to prevent it from spreading.
6. A panicked reaction could result in the fire and other damage becoming more
extensive.

KNOW YOUR MACHINE
1. On / Off Trigger
2. Safety Button
3. Cable Restraint
4. Head Angle Button
5. Nylon Head, Spool & cover
6. Edger Button
7. Height Adjuster
8. Adjustable Front Handle
9. Edging Wheel
10. Guard
11. Cutting Knife
1
2
3
8
7
4
6
5
9
10
11

ASSEMBLY
WARNING
Stop the motor and unplug the electrical cable before any repairs or maintenance
operations.
DO NOT attempt to start this machine without it first being FULLY assembled.
Your line trimmer has been supplied unassembled. Please follow the below steps to complete
assembly.
PROTECTIVE GUARD & EDGING WHEEL
CAUTION
Risk of injury!
On the underside of the protective guard there is a sharp blade designed to cut the thread.
Remove any transportation protection before operating
1. Place the internal guard beneath the external guard, align the 3 holes on both parts and
connect with three screws.
2. Use two screws to attach the edging wheel the the guard assembly.
3. Place the guard assembly onto the trimmer head and secure with two screws.

FRONT HANDLE
1. Press and hold the buttons on both sides of the main body and slide the front handle
over, until the buttons fit into the holes of the front handle.

OPERATION
DANGER
Risk of injury! The device may only be put into operation if there are no defects. If a part is
defective it must be replaced before the device is used again.
WARNING
Risk of injury! Before starting work, check the area & remove all objects which may be kicked
up by the unit.
FRONT HANDLE
1. The front handle can be set at various angles. To change the angle, press the button on
left side and adjust the front handle to the desired angle, then release the button.
HEIGHT ADJUSTMENT
1. Loosen the telescopic lock (5), pull the upper section and adjust to desired length for
your height, then lock the clip (5).

ANGLE OF CUT
1. Press the unlock button (7).
2. Slightly move the pole assembly upward or downward to adjust the angle until it locks in
place.
CABLE RESTRAINT
1. Feed a loop of the electrical cable through the hole in the casing and onto the strain
relief hook as shown with a loop. Pull it tight to ensure it is secure.
(Cable in image is different to item supplied with this product)
Before operating, check that the tool is in good working order and that the length of the
trimmer line is correct, as follows:
1. Ensure the switch is in the off position and disconnect the plug from the electrical supply.
2. Examine the general condition of the tool. Inspect the guard, switch, electrical cable
and extension lead (if used), check for loose screws, improper mounting, broken parts
and any other condition that may affect its safe operation. If abnormal noise or vibration
occurs during operation, turn the line trimmer off immediately and have the problem
corrected by a qualified electrician.
3. Ensure that you are on a flat surface and have secure footing.
4. Check that the line touches or goes beyond the edge of the guard.
SWITCHING ON AND OFF
After reading the safety rules carefully, follow the instructions below in order to get the most
out of your line trimmer.
Start off slowly, when you have gained experience, you will be able to use the grass trimmer
to its full potential.
1. To start the trimmer, first press the safety button and keep held in, when pressing the
On/Off trigger. Once the motor is running, release the safety button, whilst keeping the
On/Off trigger held securely.
2. To stop the machine, simply release the On/Off switch (1).

EXTENDING THE NYLON LINE
WARNING
Do not use any kind of metal wire or metal wire encased in plastic in the cutting head. This
may cause serious injuries to the user.
Your trimmer uses 1.6 mm diameter, round nylon line to cut grass and weeds quickly and
easily. During use, the tip of the nylon line will get shorter due to wear. Cutting line will wear
faster if the cutting or edging is done along sidewalks or other abrasive surfaces or heavier
weeds are being cut.
For this reason, the cutter is provided with a system: “Auto-feed” that when the cutting line is
too short，it can feed for itself.
REPLACEMENT SPOOL
1. Push the tabs (b) of the spool holder (a) both sides down and pull it out.
2. Remove the empty spool (c) and clean the inside of the spool holder carefully removing
all dust and grass residues.
3. Insert now the new spool in the spool base and push the end of line through the lateral
holes (d).
4. Push the spool holder on and fasten it securely.
5. Re-establish the length of the line by pushing the head of spool holder and pull the line
ends out to the desired length.
CAUTION!
Under no circumstances wind extra line on the empty spool. Instead replace it with a new
one, the same as the original. The use of line with different characteristics to those of the
original can permanently damage the grass trimmer as well as voiding the terms of the
manufacturer’s warranty.
OPERATING AREA
Only cut with the left (shown here as light grey) area of the cutting unit when the unit is being
moved from right to left.
In the right (dark grey) area, the threads rotate in your direction.
This represents a high level of kickback risk and objects may be thrown in your direction by
the rotation of the thread. You may be hurt as a result.
When the unit is moved from left to right, ensure that the nylon line is kept away from the
grass to ensure that the grass is not thrown up.
Cut long grass from top to bottom to ensure that the grass does not get tangled around the
spool.
Only use the tip of the nylon line. This way you use less nylon line and avoid grass getting
caught up in the spool.

Only take the nylon line as close as absolutely necessary to posts, walls, fences etc. Solid
objects will wear the nylon line.
Tree trunks, young trees and bushes may be damaged by the nylon line.
Use the metal plant guard to ensure your plants are not harmed. The plant guard can fold
down to be operational, or up to be housed away.
TRIMMING INSTRUCTIONS
1. Walk, never run with the machine, be very careful when trimming uneven/rough ground.
2. Be careful when changing the direction of the trimmer on a slope. Trim across the face of
slopes, never down or up.
3. Do not trim excessively steep slopes.
4. Best results will be achieved if the grass is dry. Wet grass will clog the spool and rotation of
the head.
5. To prevent grass becoming entangled around the spool, cut longer grass in stages.
6. Check that all nuts, bolts and screws are well tightened.
7. When line trimming, always wear a long trousers and strong footwear.
8. Work only when there is enough light.
9. Turn off the motor and remove the electrical plug from the power source, if you must
leave the line trimmer unattended.
10. Never place your hands and feet underneath the guard while the motor is running.
11. Never change in any way the rated speed of the motor.
12. Never lift or carry the line trimmer above working height, while the motor is running.
13. Stop the motor and remove the electrical cable from the power source in these cases:
-Before any operation under the guard.
-Before any maintenance, repairing or checking operations.
-Before carrying, lifting or removing the line trimmer.
-If you leave the line trimmer unattended or changing the cutting height.
-After hitting a foreign object, stop the line trimmer and check thoroughly the
machine in order to see if it is damaged. Take the machine to a local Approved
Service Dealer for inspection if necessary. Repairs of this nature are not covered

under the Manufacturer’s warranty.
-If the line trimmer vibrates in an abnormal way, find the reasons why, and take your
line trimmer to a local Approved Service Dealer.
WARNING
After the motor has stopped, the nylon line will still rotate a couple of seconds.
CAUTION
Allowing anyone to operate this machine without proper instruction may result in injury.
Wear sturdy, full coverage footwear. Operating this machine with bare feet, or with open toe
shoes or sandals increases your risk of injury.
Do not use the machine at night or in poor light.
Be sure to transport the machine from one place to another with the motor off.
To prevent damage, check the machine for any signs of damage or other faults when
operated.

MAINTENANCE & STORAGE
WARNING
Improper maintenance & storage of the machine may void your warranty.
Keep the machine clean for better and safer performance.
Turn off the motor and remove the electrical plug from the power source before performing
any maintenance.
MAINTENANCE
Use only original equipment replacement parts. Other parts may not perform as well, may
damage the unit and may result in injury. In addition, use of other parts may invalidate your
warranty.
•Before each use, check all nuts & bolts to be sure they are sufficiently tightened.
•We recommend only manufacturer original parts are used when maintaining this
machine. Failure to do so could invalidate your manufacturer’s warranty.
•The motor must be switched off and the electrical plug removed from the power source,
before the machine is unassembled, cleaned, serviced or maintained.
CLEANING
CAUTION
Do not use a water hose or pressure washer to clean the machine. Water can damage the
motor.
•Keep your machine clean. Thoroughly clean the machine at the end of each use.
•Clean the motor air vents with a cloth or brush. Motor air vents should be free from debris
to allow air circulation around the motor during use.
•Clean the underside of the guard with a stiff brush, before any maintenance is
undertaken to the spool.
STORAGE & TRANSPORT
The following steps should be taken to prepare your machine for storage.
STORING THE LINE TRIMMER
•Always unplug the machine from the mains for storage.
•For trouble free service, make sure the machine is clean and dry before storing.
•Please ensure the machine is stored away from direct sunlight.
•Store indoors or in a safe, locked protected area during severe weather and winter
months.
•If storing for an extended period, inspect, clean and repair the machine if necessary.
Store in a clean, dry, dust free area.
•Ensure the machine is stored in a position, where any persons cannot step on to attempt
to reach items up high, due to risk of movement.
TRANSPORT
•Always unplug the machine from the mains for storage.
•Use the original packaging to ship whenever possible.

TROUBLE SHOOTING
WARNING!
Only perform the steps described in these instructions!
All further inspection, maintenance and repair work must be performed by an authorised
service specialist!
Contact your local authorised service dealer if the problem cannot be solved by yourself!
WARNING!
If the product does not perform properly, makes unusual sounds, the motor does not start or
stop as described, the cutting device does not work properly, or any other irregularity or
malfunction occurs, do not attempt to repair the product by yourself.
PROBLEM
POSSIBLE CAUSES
REMEDIAL ACTION
Motor does not start
No power supply
Check fuse / extension lead.
Machine cable defective
Contact Approved Service Dealer.
Blade jammed
Clean guard: the blade must rotate
freely.
Loss of motor
performance
Too much grass around
spool
Clean spool: the head must rotate
freely.
Cut longer grass in stages to prevent
grass from becoming tangled around
the spool.
Nylon line doesn’t
unwind
Nylon Line used up
Replace the spool
Spool blocked
Remove the cause of the blockage.

PARTS DIAGRAM & LIST

Item No.
Part No.
Description
Qty
1
QG130-3131-ABBD40 -1601
Screw
2
2
QG130-287-7A22301
Wheel Bracket
1
3
QG130-356-7A22301
Edging Wheel
1
4
QG130-3129-A0406
Flat Gasket
1
5
QG130-3131-ABBD40-1601
Screw
1
6
QG130-246-7A22301
Guard Block
1
7
QG130-3131-ABBD40-1601
Screw
2
8
QG130-3131-ABBD40-1601
Screw
2
9
QG130-183-8A20101
Cutting Knife
1
10
QG130-317-7A22301
Guard
1
11
QG130-386-7A20101
Spool Cap
1
12
QG130-269-7A20101
Plug
1
13
QG130-195-7A20101
Nylon Line
1
14
QG130-3132-A0801
Hex Nut
1
15
QG130-364-7A20101
Spool
1
16
QG130-344-7A20102
Balance Piece
1
17
QG130-274-7A20101
Balance Weight
1
18
QG130-370-7J11501
Ball Bearing
2
19
QG130-133-B050501
Hollow Rivet
2
20
QG130-264-7A21701
Fan
1
21
QG130-287-7A22302
Motor Bottom Support
1
22
QG130-131-7J10301
Gasket
2
23
QG130-129-A0809R
Spring Washer
2
24
QG130-129-7J1120101
mat
2
25
QG130-117-7A22301
Stator
1
26
QG130-3369-A000608
Bearing 608
1
27
QG130-303-7A22301
Left Motor Casing
1
28
QG130-319-7A22301
Left Cover
1
29
QG130-115-7A22301
Rotor
1
30
QG130-30
Connecting Line
31
QG130-3131-ABBD30 -1001
Screw
2
32
QG130-3369-A000607
Bearing 607
1
33
QG130-118-7A22301
Carbon
2
34
QG130-120-7A21701
Caron Brush
2
35
QG130-132-F0401
Hex Nut
2
36
QG130-287-7A20102
Top Motor Bracket
1
37
QG130-3131-ABBD40-1601
Screw
5
38
QG130-3131-ABBD40 -1201
Screw
2
39
QG130-220-7J10101
Line Pressing Board
1
40
QG130-319-7A22303
Top Cover
1
41
QG130-270-7A50101
Cushion
2