Q-See QSDS1428D User manual

MONITOR
Indoor Mini Color CCD Camera
With Pinhole Lens
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning-
Caution Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could
void the users' authority to operate the equipment.
（
（（
（ a ）
））
） Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service
person for servicing.
（
（（
（ b ）
））
） Handle the camera with care.
Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（ c ）
））
） Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
（
（（
（ d ）
））
） Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（ e ）
））
） Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.
A. PRECAUTIONS ：
THIS MINI CCTV COLOR CCD CAMERA Introduces advanced CCD and
digital technology, and offers customers a high quality and high resolution
picture.
Has a high-resolution 1/4" CCD image sensor with image resolution of
420TVL
Wide viewing angle 120 degrees
Comes with 2.8 pinhole lens
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
B. FEATURES ：
Low power consumption
Indoor use only
www.q-see.com
WARNING To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION: TO ED UCE THE ISK OF ELECT IC SHOCK DO NOT
EMOVE COVE (O BACK) NO USE -SE VICEABLE
PA TS INSIDE EFE SE VICING TO QUALFIED SE VICE
PE SONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
MODEL: QSDS1428D
MONITOR
电源
DVR
监视器
电源
摄像机
E. DIMENSIONS ：
Indoor Mini Color CCD Camera
With Pinhole Lens
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning-
Caution Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could
void the users' authority to operate the equipment.
（
（（
（ a ）
））
） Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service
person for servicing.
（
（（
（ b ）
））
） Handle the camera with care.
Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（ c ）
））
） Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
（
（（
（ d ）
））
） Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（ e ）
））
） Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.
A. PRECAUTIONS ：
THIS MINI CCTV COLOR CCD CAMERA Introduces advanced CCD and
digital technology, and offers customers a high quality and high resolution
picture.
Has a high-resolution 1/4" CCD image sensor with image resolution of
420TVL
Wide viewing angle 120 degrees
Comes with 2.8 pinhole lens
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
B. FEATURES ：
Low power consumption
（ b ） One monitor system with two or more cameras ：
（ a ） One monitor system with one camera ：
Video monitor
AC ADAPTER
CAMERA
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION ：
COLOR 1/4" SONY CCD
NTSC:510(H) 492(V) PAL:500(H) 582(H)
420TVL
Internal
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
0.45
1.0Vp-p 75ΩBNC
---
Fixed 2.8mm, pinhole
On/Off
On/Off
DC12V 100mA
<1.5W
About 75g
-10
℃
～ +50
℃
(14 F to 122 F) RH 95% Max
≥48dB
Scanning system
Sync System
Electronic Shutter
White Balance
Image Sensor
Pixel
Horizontal Resolution
Lens
Indoor Use only
S/N Ratio
Gamma
Video Output
Power Supply
Power Consumption
Operating Temp
AGC
BLC
Weight
D. SPECIFICATIONS ：
Indoor use only
www.q-see.com
WARNING To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION: TO ED UCE THE ISK OF ELECT IC SHOCK DO NOT
EMOVE COVE (O BACK) NO USE -SE VICEABLE
PA TS INSIDE EFE SE VICING TO QUALFIED SE VICE
PE SONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
MODEL: QSDS1428D
0.2 Lux
Usable Illumination
120 degrees
Viewing Angle
MONITOR
电源
DVR
监视器
电源
摄像机
E. DIMENSIONS ：
Indoor Mini Color CCD Camera
With Pinhole Lens
CCTV SYSTEM
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates,uses,and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning-
Caution Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could
void the users' authority to operate the equipment.
（
（（
（ a ）
））
） Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service
person for servicing.
（
（（
（ b ）
））
） Handle the camera with care.
Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
（
（（
（ c ）
））
） Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
（
（（
（ d ）
））
） Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
（
（（
（ e ）
））
） Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.
A. PRECAUTIONS ：
THIS MINI CCTV COLOR CCD CAMERA Introduces advanced CCD and
digital technology, and offers customers a high quality and high resolution
picture.
Has a high-resolution 1/4" CCD image sensor with image resolution of
420TVL
Wide viewing angle 120 degrees
Comes with 2.8 pinhole lens
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
B. FEATURES ：
Low power consumption
（ b ） One monitor system with two or more cameras ：
（ a ） One monitor system with one camera ：
Video monitor
AC ADAPTER
CAMERA
Video monitor
AC ADAPTER
CAMERA
C. CONNECTION ：
COLOR 1/4" SONY CCD
NTSC:510(H) 492(V) PAL:500(H) 582(H)
420TVL
Internal
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
0.45
1.0Vp-p 75ΩBNC
---
Fixed 2.8mm, pinhole
On/Off
On/Off
DC12V 100mA
<1.5W
About 75g
-10
℃
～ +50
℃
(14 F to 122 F) RH 95% Max
≥48dB
Scanning system
Sync System
Electronic Shutter
White Balance
Image Sensor
Pixel
Horizontal Resolution
Lens
Indoor Use only
S/N Ratio
Gamma
Video Output
Power Supply
Power Consumption
Operating Temp
AGC
BLC
Weight
D. SPECIFICATIONS ：
Indoor use only
www.q-see.com
WARNING To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
!
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock .
SA 1965
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
CAUTION: TO ED UCE THE ISK OF ELECT IC SHOCK DO NOT
EMOVE COVE (O BACK) NO USE -SE VICEABLE
PA TS INSIDE EFE SE VICING TO QUALFIED SE VICE
PE SONINEL
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
MODEL: QSDS1428D
0.2 Lux
Usable Illumination
120 degrees
Viewing Angle