Qazqa Rana WL PIR LUX LED Solar User manual

1.5W Fairy
1.The switch is cut-off switch, this lamp can get solar charged in any mode.
2.This is a solar powered lamp, please install it in a location where can get
enough sunshine.
3.Please kindly note the lighting time depends on sunshine duration and
weather.
4. The lamp will light up automatically at dusk and off at dawn.
5. Built-in IC is with over-charge, over-discharge and over-voltage protection.
6. The lamp is equipped with an internal lithium battery, which is replaceable.
If any need, please contact seller for correct new battery.
7. If the battery is taken out and put back in or replaced with new ones, please
toward the solar panel to sunshine or a strong light to activate the lamp.
8. Non-professional please do not disassemble the lamp.
9. Please do not dispose the battery with household garbage to avoid
explosion.
Measure card
Expansion plug
Notch
Screw
Button
1
2
3
4
5
1. Please use measure card to drill 2 holes of Φ6mm in correct position.
2. Fix 2 expansion plugs into the holes.
3. Fix screws to the expansion plugs with a spare space.
4. Hang the notch onto the screws and fasten the lamp.
5. Press the button to turn on the lamp.
1.5W
Global Patent Design with Front & Back Light
Please read and follow all instructions to operate.
Save this manual for future reference.
INSTRUCTION MANUALINSTRUCTION MANUAL
Rana WL PIR LUX LED Solar 1.5W
102193
Installation
Notice

Product Name
Power/Lumen
LEDs
Warranty
Housing Material
Installation Height
Packing
IP Degree
Solar Panel
Li-ion Battery
Detection Angle/Area
Beam Angle
Solar LED Wall Light with PIR Sensor
1.5W/220LM
SMD2835*13PCS( Front 12PCS+Back 1PC)
90º
14500 / 500mAh / 3.7V, replaceable
0.5Wp, Mono-crystalline silicon
120º / ≤6Mtrs
IP65 Waterproof
24 months(battery 12months warranty)
ABS+PC, Anti-UV, fireproof
≤ 4Mtrs
Blister Package (1*Solar light,1*Color page,
1*Accessory bag,1*User manual,1*Measure card)
When battery capactity above>30%
Lamp automatically turns on to full
brightness (220lm) when motion is
detected in the range ≤6 mtrs and then
turns to weak brightness (front light on
& back light on) in 10 seconds of no
motion.
When battery capactity below<30%
Lamp automatically turns on to full
brightness (220lm) when motion is
detected in the range ≤6 mtrs and then
turns to weak brightness (front light off
& back light on) in 10 seconds of no
motion.
Auto-changing Working Mode
Solar Powered
Light on/off Automatically
IP65 Waterproof Cordless
Super Bright
ZERO Electricity Cost
PlR Inductive
This is a totally automatic lamp with function of auto-adjusting working mode.
You only need to press the button once, it will work permanently.
Kindly remind:
1. This lamp can be flexibly used as wall light, security light, emergency
light, portable light etc.
2. You can install it easily in your garden, pathway, garage, courtyard,
entrance, balcony, fence etc.
Specification Working Mode
Features
Applications
Installation Height
Detection Area
10m Lighting Area
Installation
height
≤4m
1m 2m 3m 4m 5m 6m 7m
1m
2m
3m
4m
120° 120°
120° 120°