Qazqa Elif WL 1 Black Solar User manual

Elif WL 1 Black Solar
104842
IP54
In sta ll
Before
Insall
Combina on
Install
Seperate
Install
2 m eters
extension cord
①③
①Screw the lamp with
Bracket “B” on the wall
Hand Screw the Bracket “A” to the back
of Solar (Also marked “A”)
Hand Screw the Bracket“B” to the back
of Lamp (Also marked “B”)
③Use Screw to fix the Solar Part on the wall
then connect the cable
②
①
①
③
③
②
②
②
Fix the Solar Part with
Bracket “A” to Bracket “B”
Connected
1. Screw the Lamp with Bracket “B” on the wall
2. Screw the Solar Part with Bracket “A” on the wall
3. Use 2 meters extension cord to make 2 parts connected
Adjust Knobs:
Switch:
n.
f.
light on in
.on
In darkness , movement detected, light on. er delay , light of
in darkness , nightlight light in low lumen movement detected, high lumen,
aer delay me , back to low lume
Light off( won’t effect solar charing).
LUX 15-1000LUX (adjustable)
10-60seconds (adjustable)
Max.10m (adjustable)
8-10hours
110°±10°
Sensor distance
PIR sensor angle
A
B
Lamp Solar part
Max.8W
3000K
Ra>80
25000H
-
+
SMD 8W