Qcells Q.HOME+ESS HYB-G2 Installation guide

Option 1:
Mounted with the Q Home
system.
Note: If mounted outside
the Droplet should be
enclosed in a suitable
enclosure.
Option 2:
Mounted with the electrical
switchboard. (ensure
installation complies with
AS3000)
Option 3:
Mounted within the home
near the home internet
router.

Option 1:
Connect the Micro USB power pack to the micro USB
port of the Droplet and plug the power pack into a 240v
GPO. (Power pack included with Droplet)
Option 2:
Connection via a switchboard DIN mounted 240vAC to
a 5vDC power supply using a micro USB connection
lead, plugging the lead into the micro USB port of the
Droplet. (DIN mount power supply and lead not
included)

Connect the Droplet to
the Q Home System
using a USB Ethernet
adaptor.
(USB adaptor included.
Ethernet cables not
included)
Connect the Droplet to
the internet by ethernet to
the home router

Connect the Droplet to
the Q Home System
using an Ethernet cable
to the home router.
(USB adaptor included.
Ethernet cables not
included)
Connect the Droplet to
the internet using an
Ethernet cable to the
home router.

Connect the Droplet to
the Q Home System
using a USB Ethernet
adaptor.
(USB adaptor included.
Ethernet cables not
included)
Connect the Droplet to the internet by Wi-Fi to the
home router.
To do this you will need to down load the SwitchDin
Installer App from Apple App Store or from Google
Play.

Connect the Droplet to
the Q Home System
using a USB Ethernet
adaptor.
(USB adaptor included.
Ethernet cables not
included)
Connect the Droplet to
the internet using a 3G /
4G Modem.