Qlife FLC1808 User manual

FLC1808
Vibe Multifunctional Facial Cleansing Brush
Model: FLC-1808
Your Lifestyle, Your Choice

·Product Introduction
·Specification
·Content
·How to Use
·Cleaning and Maintenence
·Light State
·Precautions
·Troubleshooting Guide
·Service Process Description
Instruction Manual

Product Introduction
Deep
Cleaning Brush
Silicon
EMS Microcurrent
Soft
Cleaning Brush
LED Red Light
Makeup
Remover Area
Magnetic Ring
Power & Mode
Select
Lift up Area
Vibration Speed
Control
Waterproof
Charging Port

Name: Vibe Multifunctional Facial Cleansing Brush
Model: FLC1808
Weight: 124.4g
Product Size: 110.9x67.1x31.5mm
Main Material: Silicon, PC, ABS, SUS304
Charge Parameters: DC5V, 500mA
Battery Capacity: 500mAh
Charging Time: 2h
Working Time: 80min
Water Proof Level: IPX7
Specification
Vibe Facial Cleanser × 1
usb cable × 1
Instruction Manual × 1
Content

How to Use
Remove the magnetic suction ring
Place makeup cotton makeup remover in the makeup
remover area
Use the magnetic ring holder to clamp down the cotton
wipe
Press & hold the power button to turn on the device
Use the vibration speed keys to adjust the vibration
cleaning intensity
After makeup removal is completed, press and hold the
power mode to turn off device.
①
②
③
④
⑤
⑥
Use the normal amount of facial cleanser you normally
use and place it on the cleansing area.
Wet your face with water
Press & hold the power button to start the facial
cleanser. The sonic vibrations assist for deep cleaning.
Adjust the vibration cleaning intensity to your choosing
by using the vibration speed keys.
After cleansing is completed, press and hold the power
mode to turn off device.
①
②
③
④
⑤
Vibe Makeup Removal
Facial Cleansing

How to Use
Remove the magnetic suction ring
Place makeup cotton makeup remover in the makeup
remover area
Use the magnetic ring holder to clamp down the cotton
wipe
Press & hold the power button to turn on the device
Use the vibration speed keys to adjust the vibration
cleaning intensity
After makeup removal is completed, press and hold the
power mode to turn off device.
Press & hold the power button to start the facial cleanser
sonic vibrations which assist in massage and in lifting of
your skin.
Adjust the vibration cleaning intensity to your choosing
by using the vibration speed keys.
Shape, lift, & massage the area of your liking to life skin
upwards.
After massage and lifting is completed, press and hold
the power mode to turn off device.
①
②
③
④
Shaping & Lifting
Spread your favorite the moisturizing cream evenly on
your face, then press and hold the power button to
switch on device
Next turn on the EMS microcurrent mode with a short
press of the power button
Adjust the vibration cleaning intensity to your choosing
by using the vibration speed keys.
Use the EMS microcurrent to lift up skin and help it
absorb the cream better. The sonic vibration assists in
helping your skin absorb the cream. The red light
treatment stimulate the skin to produce more collagen.
①
②
③
④
Using EMS Microcurrent with Red Light Treatment

Cleaning and Maintenance
* When the device is not being use for a long periods of
time, make sure that the device is cleaned and wiped dry.
*Do not use harsh chemical cleaners like bleach or
rubbing alcohol to clean the device.
*Use non toxic diswashing cleaner or soap to clean the
device. Then make sure the device is completely dry
before storing.
*Store in dry areas away from direct sunlight
Light state
Low Battery: Red Light flashes
(Power off after flashing 3 times)
Charging: The Red light is on
Fully Charged: Displays a blue light
Precautions
Do not keep the device soaked for long periods of
time.
Do not use the device with any type of corrosive liquids or
cleaning products that may damage the device.
Do not charge device when charging port is not dry.
Do not disassemble, modify, misuse, or throw the
product in any way.

Troubleshooting Guide
GET SOCIAL WITH US
* When the device is not being use for a long periods of
time, make sure that the device is cleaned and wiped dry.
*Do not use harsh chemical cleaners like bleach or
rubbing alcohol to clean the device.
*Use non toxic diswashing cleaner or soap to clean the
device. Then make sure the device is completely dry
before storing.
*Store in dry areas away from direct sunlight
1.)Why is my device not responding when pressing
power button?
Try charging the battery and then try again.
2.) Why is my device not charging?
Check to confirm that the charging cable is connected
and is properly working
3.) Why is the ems not working properly?
Adjust Vibration Speed Control intensity during EMS
mode to test if that resolves the problem.
4.) Why does my siliicon brush feel sticky or weird?
If the silicon brush deteriorates or becomes sticky due to
oxidation or damage, stop using the device immediately.
IF the device still does not work properly, contact the
seller that you purchased the product from or
[email protected]
@Qlifeproducts
@Qlifetoday
@Qlifetoday
@Qlifetoday
EMAIL US
[email protected]
WEBSITE
www.qlifetoday.com