Qlogic 7104-HCA-128LP User manual

DATA SHEET
7104-HCA-128LP
InfiniBand (IB) 4X SDR to PCI-X
Host Channel Adapter (HCA)
Benefits
Seamless InfiniBand enabling of PCI and PCI-X•
servers. No operating system or applications
changes required
Improved server CPU utilization with RDMA•
protocols
Fast 10-Gbps protocol today for clustering•
Server connectivity to InfiniBand based intelligent•
virtual I/O and clustering fabrics
Features
Comprehensive suite of high performance Upper•
Level Protocols (ULPs)
µDAPL–
Sockets Direct Protocol (SDP)–
Reliable Datagram Sockets (RDS)–
VirtualNIC–
VirtualHBA–
IPoIB–
MPI–
Windows– ®SDP
Dual 4X (10 Gb) InfiniBand ports•
Fully PCI/PCI-X compliant•
Low profile design•
Supports up to 130K queue pairs and 130K•
completion queues
An integral member of the QLogic family of interconnect offerings, the 7104-
HCA-128LP is a low profile, dual port 4X (10 Gb) Host Channel Adapter (HCA)
that enables the widest variety of current and next-generation servers to
realize the full benefits of InfiniBand.
The QLogic HCA creates an expressway between the server and the
InfiniBand fabric, allowing information transfer at 10 Gbps, up to 10 times the
bandwidth of current server interfaces. A comprehensive host environment
of high performance ULPs contained within the QLogic software family
enables the HCA to provide unprecedented performance to core business
applications that are supported by DBMS clustering, High Performance
Business Computing (HPBC), and High Availability Clustering.
QLogic HCA in the Enterprise. Combined with its ULPs, the HCA is the channel
by which today’s complex and costly enterprise environments quickly evolve
to feed ever-growing processing requirements. Clustering, Ethernet, and
Fibre Channel are all concurrently supported via a single 10-Gb pipe. The
net effect is a significantly reduced level of infrastructure complexity and
improved business responsiveness, with a lower total cost of ownership.
The HCA, used in conjunction with QLogic’s family of InfiniBand clustering
switches and virtual I/O systems, is part of a complete end-to-end InfiniBand
solution ready to enable today’s servers to handle tomorrow’s processing
requirements.
Guaranteed Interoperability. InfiniBand ecosystem partner certifications,
combined with agency and regulatory testing, ensures all products meet
industry compliance hardware and software specifications. All HCAs are
tested extensively with third-party hardware, along with multiple software
applications, to ensure best-in-class InfiniBand interoperability and
compatibility. You can be confident purchasing QLogic HCAs to meet your
InfiniBand networking needs.
Investment Protection. For over 15 years, QLogic has been a technological
leader with products that address the current needs of customers, yet
provide strong investment protection to support emerging technologies and
standards. QLogic stands alone in the industry with its product portfolio
depth and experience in successfully delivering technological solutions that
address the needs of today and tomorrow.

DATA SHEET
Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.com
Europe Headquarters QLogic (UK) LTD. Surrey Technology Centre 40 Occam Road Guildford Surrey GU2 7YG UK [phone]
7104-HCA-128LP InfiniBand (IB) 4X SDR to PCI-X Host Channel Adapter (HCA)
© 2007 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, and QuickSilver are trademarks or registered trademarks of QLogic Corporation. Linux is a registered trademark of Linus
Torvalds. Windows is a registered trademark of Microsoft Corporation. Oracle is a registered trademark of Oracle Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic
Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.
D000030-000 B 2
Host Bus Interface Specifications
PCI v2.2 compliant
Low profile design•
PCI-X addendum v.10a compliant•
PCI/PCI-X interface at 33, 66, 100, and 133 MHz•
3.3V interface•
32-bit and 64-bit data and address buses•
Supports for four outstanding split transactions•
in PCI-X mode
Zero wait states on both master and slave data•
phases
InfiniBand Interfaces and Specifications
Transport types
Unreliable Datagram (UD)•
Reliable Connection (RC)•
Transport services
RDMA read request•
RDMA write request and atomic operations•
Send/Receive•
Kernel bypass
InfiniBand specifications
8 virtual fabrics plus management lane•
Configurable up to 130K queue pairs and 130K•
completion queues1
Configurable up to 256k memory regions/520K•
Windows regions1
Auto configurable MTU 256 to 2048 bytes (2048•
default)
Support for 64 configurable P_Keys per port•
Up to 8 RDMA read requests as target per queue•
pair
Maximum message size 2 GB•
1 constant and 31 configurable Global IDs (GIDs)•
Support acknowledge (ACK) coalescing•
Memory, work queue, and completion queue•
accesses protection
InfiniBand v1.1 and v1.2 compliant•
Current memory option is 128 MB. Larger memory sizes are1.
available by order
Tools and Utilities
Management support
InfiniBand Fabric Suite•
BMA, PMA, SMA, CM•
Fabric and device discovery•
Generates SMA traps•
Operating environments
Linux™•
Windows 200•
x
Connectivity
SDR: dual 4X or 1X speeds - copper HSSD•
Host Driver/Upper Level Protocol (ULP)
Support
µDAPL
ULP RDMA server-to-server access utilizing User•
Direct Access Program Library (µDAPL) APIs
SDP
Sockets Direct Protocol (SDP) support for high-•
performance zero-copy data transfers
RDS
Sockets off-load driver provides reliable, in order,•
no duplicate delivery semantics for Oracle®Real
Application Clusters (RAC)
VirtualNIC
Ethernet ULP and advanced functionality (port•
sharing, load balancing, Ethernet IB switching)
VirtualHBA
Fibre Channel ULP and advanced functionality•
(port sharing, LUN management, SCSI Remote
DMA Protocol (SRP))
IPoIB
ULP to allow Internet Protocol (IP) using•
InfiniBand (IB) as a link layer
MPI
ULP for HPC clusters utilizing Message Passing•
Interface (MPI) function calls
WSD
Windows Sockets Direct Protocol (SDP) support•
for high-performance zero-copy data transfers
Physical Specifications
PCI-X low profile form factor 6.60 in x 2.536 in•
(167.64 mm x 64.41 mm)
Environment and Equipment
Specifications
Operating temperature
10°C to 45°C at sea level•
0–3 km (10,000 feet)•
-30°C to 60°C (non-operating)•
Humidity (non-condensing)
Operating: 20% to 80%•
Storage: 5% to 90%•
Typical power consumption
10 W•
Maximum power consumption
14 W•
RoHs compliance
RoHS 5•
Agency Approvals—Product Safety
US•
UL60950–
Europe•
EN60950–
Agency Approvals—EMI and EMC
US
FCC Part 15, Class A•
Europe
EN55022 level A; EN55024; EN61000-3-2,-3•
Ordering Information
7104-HCA-128LP
Low profile 128 MB Std. PCI-X (low profile•
bracket). Ships with driver CD.