QNAP TS-101 Turbo Station User manual

Network Attached Storage
TS-101 Turbo Station
User Manual

TS-101 Turbo Station
User Manual (Version: 1.0)
©Copyright 2005. QNAP Systems, Inc. All Rights Reserved.
December 22, 2005
- 2 -

FOREWORD
Thank you for choosing QNAP products! This user manual provides detailed
instructions of using TS-101. Please read carefully and start to enjoy the
powerful functions of TS-101!
LIMITED WARRANTY
In no event shall the liability of QNAP Systems, Inc. (QNAP) exceed the price paid
for the product from direct, indirect, special, incidental, or consequential software,
or its documentation. QNAP makes no warranty or representation, expressed,
implied, or statutory, with respect to its products or the contents or use of this
documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose. QNAP
reserves the right to revise or update its products, software, or documentation
without obligation to notify any individual or entity.
CAUTION
1. Back up your system periodically to avoid any potential data loss. QNAP
disclaims any responsibility of all sorts of data loss or recovery.
2. Should you return any components of TS-101 Turbo Station package for
refund or maintenance, make sure they are carefully packed for shipping.
Any form of damages due to improper packaging will not be compensated.
- 3 -

Safety Warnings
1. TS-101 can operate normally in the temperature of 0℃-35 and relative℃
humidity of 0%-85%. Please make sure the environment is well-ventilated.
2. The power cord and devices connected to TS-101 must provide correct supply
voltage (40W, 90-264V).
3. Do not place TS-101 in direct sunlight or near chemicals. Make sure the
temperature and humidity of the environment are in optimized level.
4. Unplug the power cord and all connected cables before cleaning. Wipe TS-101
with wet towel. Do not use chemical or aerosol to clean TS-101.
5. Do not place any objects on TS-101 for the server’s normal operation and to
avoid overheat.
6. Use the flat head screws in the product package to fasten the hard disk in TS-
101 when installing hard disk for proper operation.
7. Do not place TS-101 near any liquid.
8. Do not place TS-101 on any uneven surface to avoid falling off and damage.
9. Make sure the voltage is correct in your location when using TS-101. If you
are not sure, please contact the distributor or the local power supply company.
10. Do not attempt to repair your TS-101 in any occasions. Improper
disassembly of the product may expose you to electric shock or other risks.
For any enquiries, please contact the distributor.
- 4 -

Table of Contents
Chapter 1 Overview of TS-101 Turbo Station .......................................8
1.1 Introduction...................................................................................8
1.2 Package Contents ...........................................................................9
1.3 Hardware Illustration ......................................................................9
Chapter 2 Install TS-101 ....................................................................10
2.1 Install Hard Disk........................................................................... 10
2.2 Hard Disk Recommendation List...................................................... 12
2.3 Set up TS-101.............................................................................. 13
2.4 Check System Status .................................................................... 14
2.5 Configure Software Settings........................................................... 16
2.5.1 Windows Users........................................................................ 16
2.5.2 MAC Users.............................................................................. 31
Chapter 3 Start to Enjoy the Powerful Services of TS-101..................40
3.1 Server Administration.................................................................... 44
3.2 Quick Configuration ....................................................... 45
3.3 System Settings ............................................................ 48
3.3.1 Server Name........................................................................... 48
3.3.2 Date & Time ........................................................................... 49
3.3.3 Encoding Setting ..................................................................... 50
3.3.4 View System Settings............................................................... 50
3.4 Network Settings .......................................................... 51
3.4.1 TCP/ IP Configuration ............................................................... 51
3.4.2 Microsoft Networking................................................................ 52
3.4.3 Apple Network......................................................................... 54
3.4.4 Web File Manager .................................................................... 54
3.4.5 FTP Service............................................................................. 55
3.4.6 Multimedia Station................................................................... 56
3.4.7 Download Station .................................................................... 56
3.4.8 Web Server ............................................................................ 57
3.4.9 View Network Settings ............................................................. 58
3.5 Device Configuration ...................................................... 59
- 5 -

3.5.1 SATA Disk .............................................................................. 59
3.5.2 USB Disk ................................................................................ 60
3.5.3 USB Printer............................................................................. 63
3.5.4 eSATA Disk............................................................................. 65
3.6 User Management ......................................................... 68
3.6.1 Users ..................................................................................... 68
3.6.2 User Groups............................................................................ 70
3.6.3 Quota .................................................................................... 75
3.7 Network Share Management ........................................... 77
3.7.1 Create ................................................................................... 78
3.7.2 Property ................................................................................. 79
3.7.3 Access Control ........................................................................ 80
3.7.4 Delete.................................................................................... 81
3.8 System Tools ................................................................ 82
3.8.1 Alert Notification...................................................................... 83
3.8.2 Restart/ Shutdown................................................................... 83
3.8.3 Hardware Settings ................................................................... 84
3.8.4 System Update........................................................................ 85
3.8.5 Change Logo........................................................................... 86
3.8.6 Remote Replication (Disaster Recovery)...................................... 87
3.8.7 Backup/ Restore/ Reset Settings................................................ 90
3.9 Event Logs ................................................................... 91
Chapter 4 Copy Data Directly by USB Ports to TS-101 ........................92
Chapter 5 Multimedia Station .............................................................93
Chapter 6 Download Station...............................................................99
Chapter 7 Web Server ......................................................................105
Chapter 8 FTP Server........................................................................108
Chapter 9 Web File Manager.............................................................111
Chapter 10 NetBak Replicator .....................................................116
Chapter 11 TS-101 Maintenance.........................................................131
11.1 Restart/ Shut down Server........................................................... 131
11.2 Reset Administrator Password and Network Settings........................ 132
- 6 -

11.3 Disk Failure or Malfunction ........................................................... 133
11.4 Power Outage or Abnormal Shutdown............................................ 133
Technical Support ................................................................................134
- 7 -

Chapter 1 Overview of TS-101 Turbo Station
1.1 Introduction
Thank you for choosing TS-101 Turbo Station. This product has the following key
features:
99-in-1 server: Multimedia Station, Download Station, Mirror Station, Disaster
Recovery, Web Server, Backup Server, File Server, FTP Server, and Printer
Server
9Easy to use, simple configuration in a few steps and TS-101 is ready to use!
9Enormous storage capacity, support SATA disk of up to 500GB or above, and
extendable to 1TB or more by eSATA/USB port.
93 high speed USB 2.0 (480Mbps) to support multiple USB devices like printer,
disk, digital camera, thumb drive, card reader etc. to provide diversified
functions.
9High speed transfer, 480Mb USB 2.0, Gigabit Ethernet, 1.5GB eSATA high
speed file transfer. With highly efficient block level algorithm, data transfer
can be done instantly.
9Incomparable high reliability, most complete and reliable data backup:
instant/ schedule/ real-time backup and can compress data to remote location.
9Stylish aluminum design, the best heat-release, shock-resistance, anti-
collision aluminum design
- 8 -

1.2 Package Contents
Your TS-101 package contains:
9TS-101 Turbo Station
9Adaptor
9Power cord
9CD-ROM (user manual,
Quick Install Wizard
and software inclusive)
9Quick Installation
Guide
9Flat head screw x 4
9Ethernet cable x 1
9Stand x 2
1.3 Hardware Illustration
One Touch Copy Button
LED indicators:
Status, HDD,
eSATA, LAN and
Power
USB Ports
Power Button
eSATA
Giga LAN
Reset Button
Power Cord Hook
Power Connector
K-Lock
Security Slot
- 9 -

Chapter 2 Install TS-101
2.1 Install Hard Disk
nUnfasten the two round head screws at the back of TS-101. Pull out the front
case of TS-101 as shown below:
PullPull
oInstall a hard disk in TS-101 drive plate. Make sure the disk holes of the disk
match the holes of drive plate. Lock the disk with flat head screws.
- 10 -

pAfter installing the disk, cover TS-101 with the front case and fasten the
round head screws. Then place TS-101 vertically on the stands.
- 11 -

2.2 Hard Disk Recommendation List
The following HDD models are verified by QNAP that are compatible with TS-101.
It is recommended to use the disk models listed here. Other HDD brands that are
not tested by QNAP may or may not work properly with TS-101. For more
updated compatible hard disk information, please visit QNAP website at
www.qnap.com.tw.
QNAP disclaims any responsibility for product damage/
malfunction or data loss/ recovery due to misuse or improper
installation of hard disks in any occasions for any reasons.
Brand Model Name Interface
Capacity
(GB)
Rotational
Speed
(RPM)
Buffer
Size
(MB)
Barracuda 7200.9
SATA NCQ SATA 1.5GB/s 500 7200 8
Barracuda 7200.8
SATA NCQ SATA 1.5GB/s 400 7200 8
Barracuda 7200.8
SATA NCQ SATA 1.5GB/s 250 7200 8
Barracuda 7200.7
SATA NCQ SATA 1.5GB/s 160 7200 8
Seagate
Barracuda 7200.7
SATA NCQ SATA 1.5GB/s 120 7200 8
DiamondMax 10 SATAII 150MB/s
300 7200 16
MaXLine Plus II SATA 150MB/s 250 7200 8
Maxtor
DiamondMax 10 SATAII 150MB/s
200 7200 8
Western
Digital
WD Caviar®SE
Serial ATA SATA 1.5GB/s 160 7200 8
Hitachi Deskstar 7K250 SATA 1.5GB/s 250 7200 8
- 12 -

2.3 Set up TS-101
Please check your network environment and select the appropriate installation
method before installing TS-101.
1. Office/ Home 2. Individual
Connect TS-101 directly to your PC by
a network cable.
Connect TS-101 and PC to the same
hub/ switch/ router.
When you have verified your network environment, please follow the steps below
to install TS-101.
*Optional step. You can skip this step if you are not using printer service.
- 13 -

2.4 Check System Status
TS-101 provides LED indicators for you to indicate system status and information
easily. When TS-101 is turned on, please check the following items to make sure
system status is normal.
LED System starting up System has started
nPower Blue Blue
oNetwork (LAN) Blink in orange Orange
qHard disk (HDD) OrangeÆBlink in orange Off
rStatus Blink in red (short beep once)→
Blink in green (long beep once)
Green
- 14 -

LED Display & System Status Overview
LED LED Display & System Status
nPower Blue: System has started
oNetwork Blink in orange: Accessing network
peSATA Blink in orange: Accessing data
qHDD Blink in orange: Accessing data
Green: System is normal
Blink in green: Hard disk not detected
Blink in red: Bad blocks are found in hard disk
Blink in green for 5 seconds, blink in green and red
alternatively: Hard disk not initialized
Blink in green and red alternatively: Disk capacity is almost full
(long beep twice)
rStatus
Blink in red: Disk full
sFront USB
Status
Blue: You can press copy button to copy data.
Blink in blue: Accessing data
Other Status
Action LED Process Finish
nPower Blink in blue Blue
Update
firmware rStatus Blink in green and red
alternatively
Green (long beep thrice)
nPower Blink in blue Off
System shut
down rStatus Off (short beep once) Off
- 15 -

2.5 Configure Software Settings
After checking system status, please follow the steps below to configure software
settings of TS-101. The configuration procedure of Windows and MAC users are
different. Please select the appropriate procedure according to your OS.
2.5.1 Windows Users
Insert TS-101 CD-ROM in your PC. Wait for a few seconds until the following
screen shows up. Then start to configure the software settings of TS-101.
1. Select Install Quick Install Wizard.
- 16 -

2. Run Quick Install Wizard. When the wizard prompts for performing quick
configuration, click OK.
Enter the default user name and password.
Default user name: administrator
Password: admin
- 17 -

When you have entered quick configuration page, follow the instructions to
complete the settings. Click Next to continue.
- 18 -

Step 1. Enter the server name and click Next.
- 19 -

Step 2. Enter a new password or select to use the original password. Click
Next to continue.
- 20 -