QOLSYS IQ PANEL User manual

QUICK GUIDE-IQ REMOTE
Secondary tablet
for the IQ Panel 2
INFORMATION
The IQ Remote is a 7” secondary tablet that can be installed to create additional
access to the IQ Panel 2. You can pair up to three (3) of these tablets with the IQ
Panel 2.
Document#: IQR-QG-08-17
Revision#: 8/1/17
Issue Date: AUG 2017
Qolsys Part #: QW9102-840
Software : 2.0.4
Additional documentation located
on qolsys.com
Power supply
IQ Remote
NEED HELP?
(855) 4-QOLSYS
[e-mail]
Wall Mount Bracket
and screws
Optional Table Stand
IN THE BOX
OPTION 1: WALL MOUNTING
OPTION 2: TABLE STAND
Secure wall mount to
the wall with
provided hardware
Choose your
location
Connect table stand to upper
holes on the back of the
device and snap into place
Connect your power
supply
Choose your
location
Connect power
supply to the back
Slide IQ Remote onto
wall mount bracket

QUICK GUIDE-IQ REMOTE
PAIRING THE IQ REMOTE WITH THE IQ PANEL 2
Perform the following steps on the IQ Panel 2 to pair an IQ Remote
Touch
“Settings”
Enter installer code
(default is 1111)
Touch
“Installation”
Touch
“Pair”
Touch “GO” on the IQ Remote to
pair with IQ Panel 2
The IQ Remote will take a moment to synchronize with the IQ Panel 2 over the network. Once complete it
will display the home screen. Allow up to 5 minutes for the IQ Remote to auto update to the current
software. To add additional IQ Remote tablets repeat steps above with up to three (3) total devices.
Touch “IQ
Remote
Devices”
Touch
“Devices”
* * * *
Page of Qolsys Confidential and Proprietary.2 2
NEED HELP? (855) 4-QOLSYS [e-mail]
CONNECTING THE IQ REMOTE TO WIFI
The IQ Remote pairs with the IQ Panel 2 over a secure WIFI Network (802.11 B, G, N) and must be connected to
the same network as the IQ Panel 2 before you can add it to the system. To connect to a secure WIFI:
IMPORTANT: Please check that the IQ Remote can successfully connect to the network in the chosen installation location
Select network from
available list.
POWER UP THE DEVICE
Press and hold the power button until the screen illuminates (approx 3-5 sec)
Touch
“Activate WIFI”
Enter WIFI
credentials
Perform the following step on the IQ
Remote to pair with the IQ Panel 2
Whitehouse
Your Neighbor
Password
Touch
“Advanced
Settings”
Touch
“WIFI Devices”
Pair