QOMOTOP QTFP02 User manual

ASSEMBLY INSTRUCTIONS
LOUNGE
Model:QTFP02
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Important Safety Information
Please read all instructions carefully before assembling this fireplace.
For your safety, assembly by two or more adults is highly recommended.
Only use hardware provided by the supplier to assemble this product. The
use of unauthorized hardware may jeopardize the structural integrity of this
product.
Hardware may loosen over time. Periodically check that all connections are tight.
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, which will prevent damage to parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not discard the
contents of any packages or shipping boxes until assembly is complete.
Use the parts and hardware list below to identify and separate each part.
Include parts.
The use of power tools for assembly is not recommended.
Power tools can damage the hardware.
NOTE: Do not fully tighten all bolts until all parts are in place.
Failure to follow instructions may result in misalignment of bolts during
assembly.
Care and cleaning
After burning the fire, if you see the coating on the surface of the fire pit peeling
off and oxidizing when it meets water, it is a normal condition.
You can clean it with a soft brush.

1
2
3
4
5
6
7
8
Fire Pit Bowl
support leg
spark screen cover
Hooked Ring
Reinforcement ring
legs
fire poker
Waterproof cover

1x1
2x1
3x4
4x1
5x4
6x1
7x1
8x1

Ax 13
M6xL15mm
BM6mm
Cx 1
Wrench
x 14

1
2
Bx1
M6mm
B

4
3B
A
Ax 4
M6xL15mm
BM6mm x 4

5 6
A
A
B
B
Ax 8
M6xL15mm
BM6mm x 8

SHENZHEN AUKEYHI TECHNOLOGY CO., LTD.
ROOM 201, BLOCK A, NO.1, QIANWAN ROAD 1, QIANHAISHENGANG
COOPERATIVE DISTRICT, SHENZHEN, CHINA
EMAIL：[e-mail]
MADE IN CHINA