QPIX PS970H Instruction manual

QPIX PS970H 4-in-1 Scanner
QUICK USER GUIDE
Caution
Read This Guide
Before Using
Part A
Operate the scanner
with a SD card
1. Insert a SD memory card into
the scanner’s memory card slot.
2. Connect power to your QPIX
PS970H scanner via UBS cable
toAC power adapter. Press
Power button to turn on power.
Scanning film or slides
3. Push both the silver levers to
“Film Scanner” position
4. The default setting of this
scanner is for FILM.
Incorrect settings will NOT
deliver proper scan results.
Press “Mode” and Press ◀or ▶
until "Film" appears on the
screen. Press "Enter" to enter
film type selection submenu,
press ◀or ▶to choose your
film type to be scanned (film,
slide, black&white). Press
"Enter" to confirm.
5. Load your film or slides
onto the corresponding film or
slide holder. Insert the holder
into the slot. Adjust holder
position to ensure the image
appears on the screen
properly. Press “Scan” to scan
the image. You will be
prompted to save or abandon
the scanned image. If you
choose to save, the image will
be automatically saved on
your SD memory card.
Scanning photos
6. Push both the silver
levers to “Photo Scanner”
position.
7.According to the size of
your photo, fit brackets to
appropriate positions on the
photo holder for the size of
your photo. Place your
photo onto the photo holder.
Ensure that the left, right
and bottom edges of your

Note：
1. Please refer to full User Manual for
detailed operations information and
product specifications.
2. For other enquiries, please send email
to us: [e-mail]
We endeavour to attend to your enquiries
promptly.
photo are held down by the
brackets so that the photo does
not fall off the holder. Insert the
photo holder into the photo slot.
An image of the photo will
appear on the screen.
8. Press “Scan” to scan the
image. You will be prompted to
save or abandon the scanned
image. If you choose to save,
the image will be automatically
saved on your SD memory card.
Part B
Operate the scanner
without a SD card
1. The QPIX PS970H scanner
has an internal memory of up to
128MB. Connect your scanner to
your computer via the USB cable.
Press “Mode”, select “USB”
connection. The screen will go off.
On your computer screen, you will
see a new mass storage drive
marked as “NO NAME” which is
the internal memory storage of the
scanner.
2. Press “Mode”, the “NO
NAME” drive will disappear
from your computer screen.
Take steps in the above film
scanning or photo scanning
sections to scan film, slides or
photos.
3. You will be prompted to
save or abandon the
scanned image. If you
choose to save, the image
will be automatically saved
into the internal memory of
the scanner.
4. Press “Mode”, choose
“USB” connection. On the
computer screen, the “NO
NAME” mass storage will
reappear, click on that to
access scanned image
files.