Qualcast GT2518 User manual

Instruction Manual
Important - Please read these instructions fully before starting assembly
These instructions contain important information that will help you get the best from
your mower, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline
on 08456 400 800.
Qualcast
320W Grass Trimmer (Model: GT2518)
Sep 2012
UK/Ireland 08456 400 800
Web www.argosspares.co.uk
After Sales Support

Contents
2
Customer Helpline 08456 400 800
Safety Information.......................................................................................................................................... 3
Warnings Symbols .......................................................................................................................................3
Safety Warning.............................................................................................................................................4
Precautionary Measures..............................................................................................................................6
In the Box .........................................................................................................................................................8
Parts..............................................................................................................................................................8
Assembly ..........................................................................................................................................................9
Step 1 - Assembling the Housing and Handle...........................................................................................9
Step 2 - Fitting the Guard............................................................................................................................9
Operating Instructions & Tips .......................................................................................................................10
Extension Lead ..........................................................................................................................................10
Starting and Stopping................................................................................................................................10
Cutting ........................................................................................................................................................11
Maintenance...................................................................................................................................................12
Fitting a New Spool of Cutting Line..........................................................................................................12
Winding New Line onto a Spool ...............................................................................................................13
Spool Storage ............................................................................................................................................14
Troubleshooting .............................................................................................................................................16
General Troubleshooting ...........................................................................................................................16
Technical Data................................................................................................................................................16
Technical Data Table..................................................................................................................................16
Disposal..........................................................................................................................................................16
Disposal and Recycling.............................................................................................................................16
Getting Help ...................................................................................................................................................16

Important - Please read these instructions fully before starting assembly
3
Customer Helpline 08456 400 800
The following warning symbols appear throughout this assembly manual and indicate the appropriate
safety measures you should take when assembly and operating the trimmer.
Take extra care, beware of hazards.
Read instruction manual.
Wear eye protection.
Do not use the machine in the rain or leave it outdoors when it is raining.
Disconnect the mains plug if the cord is damage or entangled
Keep bystanders away
Noise level specication Lwa in dB.
Protection class II
Do not dispose of electrical equipment in domestic waste.
Conforms to all relevant safety standards.
Warnings Symbols
Safety Information

Important - Please read these instructions fully before starting assembly
4
Customer Helpline 08456 400 800
IMPORTANT! When using this equipment, the following safety precautions must be followed to avoid
injuries and damage.
• Read all operating instructions carefully and comply with them. It is important to understand these
instructions and to acquaint yourself with the machine, its correct usage and all safety requirements.
• Keep this manual in a safe place so that the information is available at all times.
• If you give the equipment to any other person, give them these operating instructions as well.
We accept no liability for damage or accidents which result from non-compliance with these instructions.
WARNING! Be extra careful when using mains-powered appliances. Basic safety precautions, including
the following, should always be followed to reduce the risk of re, electric shock and personal injury.
• Before use, check the supply and extension cord for signs of damage or ageing. If the cord becomes
damaged during use, disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn.
• Read the instructions carefully. Be familiar with the controls and proper use of the equipment.
• Keep the extension cord away from the cutting elements.
• Wear eye protection.
• Never allow children or people unfamiliar with these instructions to use the trimmer.
• Avoid using the trimmer if bystanders, especially children or pets, are nearby.
• Use the trimmer only in daylight or good articial light.
• Never operate the trimmer with damaged guards or shields or without guards or shields in place.
• Switch on the motor only when yours hands and feet are a safe distance from the cutting means.
• Never t metal cutting elements to this trimmer.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Always disconnect the trimmer from the mains when leaving the trimmer unattended.
• Disconnect the trimmer from the mains before carrying out maintenance or cleaning work.
• Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an authorized repairer.
• Take care against injury from the line cutter on the grass guard for controlling the cutting line length.
After adjusting or extending new cutter line, always return the trimmer to its normal operating
position before switching on.
• Always ensure that the ventilation openings are kept clear of debris.
• When not in use, store the trimmer out of the reach of children.
Warnings Symbols (continued)
Safety Warning
Safety Information

Important - Please read these instructions fully before starting assembly
5
Customer Helpline 08456 400 800
• If the supply cord is damaged, it must immediately be replaced by a qualied service agent to avoid
further risk of electrocution or injury.
• Ensure you are familiar with the controls and proper use of the equipment
• Before use, always check the supply and extension cord for signs of damage or ageing.
• If the cord becomes damaged during use, disconnect the plug from the mains supply immediately. Do
not touch the cord before disconnecting the plug from the mains supply.
• Never use the lawn trimmer if the mains cords are damaged or worn.
• Warning, cutting elements continue to rotate after the motor is switched o.
• Keep extension cords away from cutting elements at all times.
• For the safe operation of this machine, it should always be used together with a residual current
device (RCD) with a tripping current of not more than 30 mA.
ATTENTION! Danger. The cutting line continues to rotate for a few moments after the motor is switched
o.
SAVE THESE INSTRUCTIONS FOR USE AT A LATER DATE
Safety Warning (continued)
Safety Information

Important - Please read these instructions fully before starting assembly
6
Customer Helpline 08456 400 800
Work area
• Do not expose the appliance to rain. Do not use the appliance in damp or wet conditions.
• Only use the appliance in daylight or good articial light.
Personal protection
• Wear stout shoes or boots to protect your feet. Do not operate the appliance wearing open-toed
sandal or when barefoot.
• Wear long trousers to protect your legs.
Using your appliance
• Be sure that the appliance is switched o before connecting it to the mains supply.
• Stay alert at all times. Watch carefully what you are doing. Use common sense.
• Do not operate the appliance when you are tired.
• If the appliance begins to vibrate abnormally, switch it o and remove the plug from the socket. Allow
rotating parts to stop and inspect the appliance for damage and loose part.
• Never pull the cord to disconnect the plug from the socket. Keep the cord away from heat, oil and
sharp edges.
• If the main cable becomes damaged during use. Switch the appliance o and disconnect the plug
from the mains immediately. Do not touch the main cable before disconnect from the mains.
Safety of others
• Do not allow children or any person unfamiliar with these instructions to operate the appliance.
• Do not allow children, bystanders or animal to come near the work area or to touch the appliance or
mains cable.
• Remember that the operator maybe held responsible for the accidents or hazards occurring to other
people or their property.
After use
• Switch o, remove the plug from the socket and ensure that moving parts have stopped rotating
before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be stored in a dry place. Children should not have access to
stored appliances.
Inspection and repairs
• Before use, check the appliance for damaged or defective parts. Check for misalignment and seizure of
moving part, broken parts, damage to guards and switches or any other conditions that may aect its
operation.
• Do not use the appliance if any part is damaged or defective. Do not use the appliance if the switch
does not turn it on and o.
Precautionary Measures
Safety Information

Important - Please read these instructions fully before starting assembly
7
Customer Helpline 08456 400 800
• Never use the appliance when any guard or housing element is damaged or not in place.
• Ensure that the appliance will operate properly and perform its intended function.
• Have any damaged or defective parts repaired or replaced an authorized repair agent.
• Before use, check the mains cable for signs of damage, ageing or wear.
• Do not use the appliance if the mains cable is damaged or defective.
• If the mains cable is damaged or defective it must immediately be repaired by an authorised repair
agent to avoid any further hazard.
• Never attempt to remove or replace any parts other than those specied in this manual.
General safety during usage
This tool is double insulated; therefore no earth wire is required. Always check that the power supply
corresponds to the voltage on the rating plate.
• Before using the appliance, check that your cutting path is free from sticks, stones, wire and any other
dangerous objects that may cause damage or be projected
• Only use the appliance in the correct position, with the cutting line near the ground. Never switch the
appliance on in any other position.
• Switch on the appliance only when hands and feet are at a safe distance from the cutting line.
• Avoid any body contact with the cutting line while the appliance is running.
• Do not work on steep slopes, be sure of your footing. Be aware that freshly cut grass is damp and
slippery.
• Use only the appropriate of cutting line. Never use metal cutting line or shing line.
• After extending new cutting line, always return the appliance to its normal operating position before
switching on.
• Take care to keep the mains cable away from the cutting line. Always be aware of the position of the
cable.
Precautionary Measures (continued)
Safety Information

8
Customer Helpline 08456 400 800
1Built-In Cord Retainer
2Spare spool holder
3Safety Guard
4Cutting line on spool
5Motor Housing
6Helper handle
7ON/OFF switch
8Upper handle
In the Box
Parts
1
1
2
3
5
6
7
8
4

9
Customer Helpline 08456 400 800
WARNING! Before assembly, make sure that the tool is switched o and unplugged.
3. Place the guard onto the tool as shown
4. Secure the guard with 2 screws
WARNING! Never use the tool unless the guard is properly tted
Step 1 - Assembling the Housing and Handle
Step 2 - Fitting the Guard
Assembly
2
3 4

10
Customer Helpline 08456 400 800
Extension Lead
Starting and Stopping
Operating Instructions & Tips
Connect the extension lead socket to the plug on the mower. Hook the cord of the extension lead through
the cord retainer. This helps to prevent accidental disconnection during usage.
• Now connect to the mains electrical supply.
• Hold the device rmly with both hands. Do not place the cutter head on the ground.
• To switch on, press the on/o switch- the lawn trimmer always runs at full speed.
• To switch o, release the switch.
CAUTION! After switching the device o, the cutter head still continues to rotate for some seconds.
Remember to rst disconnect the lead from the mains supply, then from the device.
Hold the tool as show Fig 6
5
6

11
Customer Helpline 08456 400 800
Cutting
Operating Instructions & Tips
• Gently swing the trimmer from side to side.
• When cutting long grass, work in stages, cutting from the top of the grass down. This helps to prevent
the grass from wrapping itself around the cutter head. Keep away from hard objects and delicate
plants.
• If the tool starts running slowly, reduce the load.
• In order to achieve optimum cutting results, only cut dry grass
WARNING! The On/O switch must never be clamped in the on position. The motor must switch o after
releasing the switch. If the switch is not working correctly, do not use the trimmer.

12
Customer Helpline 08456 400 800
Fitting a New Spool of Cutting Line
Maintenance
You tool has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING!Before performing any maintenance, switch o and unplug the tool.
Regularly clean the ventilation slot in your tool using a soft brush or dry cloth.
Regularly clean the cutting line and spool using a soft brush or dry cloth.
Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.
Unplug the tool
• Depress the tab on the side of the spool cover and remove the spool cover 1from the housing 3
.Remove the empty spool 2from the housing.
• Remove any dirt and grass from the spool cover and housing. Insert the new spool and push It into
the boss in the housing.
• Unclip the end of cutting line 4and guide the line into the eyelets in the housing. The line should
protrude approx. 10cm from the housing.
• Align the tabs on the spool cover with the outlets in the housing.
Push the cover onto the housing until it snaps securely into place.
WARNING!If a cutting line protrudes beyond the trimming blade, cut it o so that it just reaches the
blade.
7 8
11
22
3 3
44

13
Customer Helpline 08456 400 800
Winding New Line onto a Spool
Maintenance
• You may wind new cutting line onto an empty spool. Use 1.5mm line
• Remove the empty spool from the tool as described above.
• Remove any remaining cutting line from the spool.
• First feed 10 cm of cutting line 4into each of the two eyelets, one eyelet 5in the upper section of
the spool as shown, the other eyelet in the lower section not shown, but still proceeding in the same
manner as shown for the upper section.
• Wind the cutting line onto the spool in the direction of the arrow 6. Make sure to wind the line on
neatly and in layers. Do not criss-cross.
• Lock the cutting line into a slot on the edge of spool.
• Insert the spool into the cutter head assembly as described above. Do not forget to release the cutting
line from the slot on the edge of the spool and tread it through the eylets in the housing (see- Fitting a
New Spool).
WARNING!Only use the appropriate type of cutting line.
9 10
5
4
6

14
Customer Helpline 08456 400 800
Spool Storage
Maintenance
11
12 13
14
A spare cutting line spool can be stored in the recess below the rear handle. If you store your spare spool
here it will always be ready to hand when the line on the spool being used runs out.

15
Customer Helpline 08456 400 800
Spool Storage (continued)
Maintenance
10. To store a spare spool, push it into the recess as shown.
11. Turn the spool as illustrated to lock it in place.
12. The spool should sit securely in the recess and will always be conveniently available when the line on
the spool runs out.
To remove it, turn it the spool in the opposite direction and pull it back out.

16
Customer Helpline 08456 400 800
General Troubleshooting
Troubleshooting
If your tool seems not to operate properly, follow the instruction below. If this does not solve the
problems, please contact a competent repair agent.
WARNING!Before proceeding, switch o and unplug.
Check that the spool housing can rotate freely. Carefully clean it if necessary.
Check that the cutting line does not protrude more than 8cm from the spool housing. If it does, cut it o
so that it just reaches the line trimming blade.
Technical Data Table
Disposal and Recycling
Getting Help
Technical Data
Disposal
Specification Value
Rated voltage 220-240V~, 50Hz
Power 320W
No load speed 11200min-1
Cutting width 25 cm
Line diameter 1.5 mm
Line length 2 x 2.5m
Weight 1.3 kg
Sound pressure level (dB) 82 dB(A)
Noise uncertainly value (dB) 3 dB
Sound Power level Lwa (dB(A)) 96 dB(A)
Vibration value (m/s2) <2.5
Do not dispose with household waste.
Recycle products and components according to local legal requirements.
After sales helpline number: 08456 400 800
Spare parts purchases: www.argosspares.co.uk