Qualcast GT2826 User manual

Instruction Manual
Important - Please read these instructions fully before starting assembly
These instructions contain important information that will help you get the best from
your mower, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline
on 0845 077 8888.
Qualcast
430W Grass Trimmer (Model: GT2826)
Nov 2012
UK/Ireland 0845 077 8888
Republic of Ireland 0124 77708
Web www.homebasespares.co.uk
After Sales Support

Contents
2
Customer Helpline 0845 077 8888
Safety Information.......................................................................................................................................... 3
Warnings Symbols .......................................................................................................................................3
Safety Warning.............................................................................................................................................4
Precautionary Measures..............................................................................................................................6
In the Box .........................................................................................................................................................8
Parts..............................................................................................................................................................8
Assembly ..........................................................................................................................................................9
Step 1 - Assembling the Housing and Handle...........................................................................................9
Step 2 - Fitting the Guard............................................................................................................................9
Step 3 - Assembling the Additional Handle .............................................................................................10
Operating Instructions & Tips .......................................................................................................................11
Switching ON and OFF..............................................................................................................................11
Adjusting the Additional Handle ...............................................................................................................12
Adjusting the Cutting Angle ......................................................................................................................12
Lengthening the Cutting Lines..................................................................................................................13
Manner of Operation..................................................................................................................................13
Cutting grass..............................................................................................................................................14
Vertical Cut / Lawn Edge Trimming...........................................................................................................14
Maintenance...................................................................................................................................................15
Cleaning and Maintenance .......................................................................................................................15
Cleaning......................................................................................................................................................15
Replacing the line spool ............................................................................................................................15
Exchanging the Line Spool .......................................................................................................................16
Storage .......................................................................................................................................................16
Troubleshooting .............................................................................................................................................17
General Troubleshooting ...........................................................................................................................17
Technical Data................................................................................................................................................17
Technical Data Table..................................................................................................................................17
Disposal..........................................................................................................................................................17
Disposal and Recycling.............................................................................................................................17
Getting Help ...................................................................................................................................................17

Important - Please read these instructions fully before starting assembly
3
Customer Helpline 0845 077 8888
The following warning symbols appear throughout this assembly manual and indicate the appropriate
safety measures you should take when assembly and operating the trimmer.
Take extra care, beware of hazards.
Read instruction manual.
Wear eye protection.
Do not use the machine in the rain or leave it outdoors when it is raining.
Disconnect the mains plug if the cord is damage or entangled
Keep bystanders away
Noise level specication Lwa in dB.
Protection class II
Do not dispose of electrical equipment in domestic waste.
Conforms to all relevant safety standards.
Warnings Symbols
Safety Information

Important - Please read these instructions fully before starting assembly
4
Customer Helpline 0845 077 8888
IMPORTANT! When using this equipment, the following safety precautions must be followed to avoid
injuries and damage.
• Read all operating instructions carefully and comply with them. It is important to understand
these instructions and to acquaint yourself with the machine, its correct usage and all safety
requirements.
• Keep this manual in a safe place so that the information is available at all times.
• If you give the equipment to any other person, give them these operating instructions as well.
We accept no liability for damage or accidents which result from non-compliance with these
instructions.
WARNING! Be extra careful when using mains-powered appliances. Basic safety precautions,
including the following, should always be followed to reduce the risk of re, electric shock and personal
injury.
• Before use, check the supply and extension cord for signs of damage or ageing. If the cord
becomes damaged during use, disconnect the cord from the supply immediately. DO NOT
TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the appliance if the
cord is damaged or worn.
• Read the instructions carefully. Be familiar with the controls and proper use of the equipment.
• Keep the extension cord away from the cutting elements.
• Wear eye protection.
• Never allow children or people unfamiliar with these instructions to use the trimmer.
• Avoid using the trimmer if bystanders, especially children or pets, are nearby.
• Use the trimmer only in daylight or good articial light.
• Never operate the trimmer with damaged guards or shields or without guards or shields in place.
• Switch on the motor only when yours hands and feet are a safe distance from the cutting means.
• Never t metal cutting elements to this trimmer.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Always disconnect the trimmer from the mains when leaving the trimmer unattended.
• Disconnect the trimmer from the mains before carrying out maintenance or cleaning work.
• Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an authorised
repairer.
Warnings Symbols (continued)
Safety Warning
Safety Information

Important - Please read these instructions fully before starting assembly
5
Customer Helpline 0845 077 8888
• Take care against injury from the line cutter on the grass guard for controlling the cutting line
length. After adjusting or extending new cutter line, always return the trimmer to its normal
operating position before switching on.
• Always ensure that the ventilation openings are kept clear of debris.
• When not in use, store the trimmer out of the reach of children.
• If the supply cord is damaged, it must immediately be replaced by a qualied service agent to
avoid further risk of electrocution or injury.
• Ensure you are familiar with the controls and proper use of the equipment
• Before use, always check the supply and extension cord for signs of damage or ageing.
• If the cord becomes damaged during use, disconnect the plug from the mains supply immediately.
Do not touch the cord before disconnecting the plug from the mains supply.
• Never use the lawn trimmer if the mains cords are damaged or worn.
• Warning, cutting elements continue to rotate after the motor is switched off.
• Keep extension cords away from cutting elements at all times.
• For the safe operation of this machine, it should always be used together with a residual current
device (RCD) with a tripping current of not more than 30 mA.
ATTENTION! Danger. The cutting line continues to rotate for a few moments after the motor is
switched off.
SAVE THESE INSTRUCTIONS FOR USE AT A LATER DATE
Safety Warning (continued)
Safety Information

Important - Please read these instructions fully before starting assembly
6
Customer Helpline 0845 077 8888
Work area
• Do not expose the appliance to rain. Do not use the appliance in damp or wet conditions.
• Only use the appliance in daylight or good articial light.
Personal protection
• Wear stout shoes or boots to protect your feet. Do not operate the appliance wearing open-toed
sandal or when barefoot.
• Wear long trousers to protect your legs.
Using your appliance
• Be sure that the appliance is switched off before connecting it to the mains supply.
• Stay alert at all times. Watch carefully what you are doing. Use common sense.
• Do not operate the appliance when you are tired.
• If the appliance begins to vibrate abnormally, switch it off and remove the plug from the socket.
Allow rotating parts to stop and inspect the appliance for damage and loose part.
• Never pull the cord to disconnect the plug from the socket. Keep the cord away from heat, oil and
sharp edges.
• If the main cable becomes damaged during use. Switch the appliance off and disconnect the plug
from the mains immediately. Do not touch the main cable before disconnect from the mains.
Safety of others
• Do not allow children or any person unfamiliar with these instructions to operate the appliance.
• Do not allow children, bystanders or animal to come near the work area or to touch the appliance
or mains cable.
• Remember that the operator maybe held responsible for the accidents or hazards occurring to
other people or their property.
After use
• Switch off, remove the plug from the socket and ensure that moving parts have stopped rotating
before leaving the appliance unattended and before changing, cleaning or inspecting any parts of
the appliance.
• When not in use, the appliance should be stored in a dry place. Children should not have access
to stored appliances.
Inspection and repairs
• Before use, check the appliance for damaged or defective parts. Check for misalignment and
seizure of moving part, broken parts, damage to guards and switches or any other conditions that
may affect its operation.
• Do not use the appliance if any part is damaged or defective. Do not use the appliance if the
switch does not turn it on and off.
Precautionary Measures
Safety Information

Important - Please read these instructions fully before starting assembly
7
Customer Helpline 0845 077 8888
• Never use the appliance when any guard or housing element is damaged or not in place.
• Ensure that the appliance will operate properly and perform its intended function.
• Have any damaged or defective parts repaired or replaced an authorized repair agent.
• Before use, check the mains cable for signs of damage, ageing or wear.
• Do not use the appliance if the mains cable is damaged or defective.
• If the mains cable is damaged or defective it must immediately be repaired by an authorised repair
agent to avoid any further hazard.
• Never attempt to remove or replace any parts other than those specied in this manual.
General safety during usage
This tool is double insulated; therefore no earth wire is required. Always check that the power supply
corresponds to the voltage on the rating plate.
• Before using the appliance, check that your cutting path is free from sticks, stones, wire and any
other dangerous objects that may cause damage or be projected
• Only use the appliance in the correct position, with the cutting line near the ground. Never switch
the appliance on in any other position.
• Switch on the appliance only when hands and feet are at a safe distance from the cutting line.
• Avoid any body contact with the cutting line while the appliance is running.
• Do not work on steep slopes, be sure of your footing. Be aware that freshly cut grass is damp and
slippery.
• Use only the appropriate of cutting line. Never use metal cutting line or shing line.
• After extending new cutting line, always return the appliance to its normal operating position before
switching on.
• Take care to keep the mains cable away from the cutting line. Always be aware of the position of
the cable.
Precautionary Measures (continued)
Safety Information

8
Customer Helpline 0845 077 8888
1Power cable
2Upper handle
3Cable strain relief
hook
4ON / OFF switch
5Wing nut and screw
6Helper handle
7Locking sleeve
8Aluminium shaft
9Motor head
10 Flower guard
11 Cutting head with
line spool
12 Line cutter
13 Protective cover
In the Box
Parts
11 2 3 4 5 6
7
8
9
13
10
11
12

9
Customer Helpline 0845 077 8888
WARNING! Before assembly, make sure that the tool is switched off and unplugged.
Push the aluminium shaft into the plastic housing assembly and tighten the locking sleeve.
Mount the protective cover 13 by sliding it into position then use 3 screws to lock it into place.
WARNING! Never use the tool unless the guard is properly tted
Step 1 - Assembling the Housing and Handle
Step 2 - Fitting the Guard
Assembly
2
313

10
Customer Helpline 0845 077 8888
• Pull the ends of the helper handle 6apart and slide it over the handle seat 14 .
• Attach the helper handle 6bolt and wing fastener 5.
Step 3 - Assembling the Additional Handle
Assembly
4
14
5
6

11
Customer Helpline 0845 077 8888
Switching ON and OFF
Operating Instructions & Tips
• Form a loop in the end of the extension cable, hook it through the cable strain relif hook 3.
• Connect the trimmer to the mains socket.
• Ensure you have a rm footing and hold on to the trimmer with both hands. Do not rest the cutting
head on the ground.
• To switch on depress the ON / OFF switch 4. Release the switch to switch off.
After the trimmer has been switched off the cutting head will continue to rotate for a few
seconds. Keep hands and feet well away.
The ON / OFF switch must not be locked in place. The trimmer must not be used if the
switch is damaged. There is the immediate danger of injury if the motor does not switch off
after the ON / OFF switch has been released.
WARNING! Always remove grass residue from the line cutter so that the cutting effect is not impaired.
52 3 4

12
Customer Helpline 0845 077 8888
Adjusting the Additional Handle
Adjusting the Cutting Angle
Operating Instructions & Tips
The additional handle can be set in different positions. Set the handle in such a manner that the
cutting head is slightly tilting forwards when in the working position.
• Loosen the wing nut 5and adjust the helper handle 6to the required position. Retighten the
wing nut 5.
• If the ower guard 10 is no longer required, it can be folded away into a vertical position. (Parking
position).
6
7
6
10
5

13
Customer Helpline 0845 077 8888
Lengthening the Cutting Lines
Manner of Operation
Operating Instructions & Tips
Cutting will be poor with short or worn out lines. Check whether the line spool still holds
sufficient lines when the cutting performance declines. Always disconnect the plug from the
mains socket beforehand! Line spool changing is described in “Replacing the line spool” in
the chapter on cleaning and maintenance.
Fully automatic dual line system
• The trimmer features a fully automatic dual line system so that the lines are automatically
lengthened each time the trimmer is switched on after a standstill. If the lines should be longer
that dened by the cutting circle then they will be automatically cut to the correct length by the line
cutter.
Regularly check the nylon lines for damage and whether the lines still have the correct
length defined by the line cutter.
When no line ends are visible
• Renew the line spool (see “Replacing the linespool” in the chapter on cleaning and maintenance).
Adjusting the line length manually
• Disconnect the plug from the mains socket! Press the retaining head, release it again and pull the
ends of the cord out a little. Repeat this process until the ends of the cord project a little beyond
the cord cutter.
WARNING! Danger of injury!
• Do not cut moist or wet grass.
• Before starting the trimmer check that the cutting head will not come into contact with stones,
rubble or other foreign bodies.
• Switch on the trimmer before you approach the grass that is to be cut.
• Always trail the extension cable behind you. Do not pass the operating trimmer over the extension
cable as the cable could be damaged.
• Do not overload the trimmer during operation.
• Avoid contact with obstacles (stones, walls, fences, etc.) as this will rapidly wear out the lines.

14
Customer Helpline 0845 077 8888
Cutting grass
Vertical Cut / Lawn Edge Trimming
Operating Instructions & Tips
Cut the grass by swaying the trimmer sideways to the right and left.
• Cut tall grass by a series of levels from top to bottom.
For edging, release the locking sleeve 7in an clockwise direction. Then rotate the handle to 180°
position and retighten the locking sleeve 7in a anti-clockwise direction. The handle will only rotate
in one direction.
• Special care and attention has to be taken when the cutting head is guided vertically. Always
maintain sufcient distance from the cutting lines to avoid injury.
• Avoid contact with solid objects as this will result in rapid line wear.
• Guide the trimmer slowly along the lawn edge for edge trimming.
You can work with the ower guard extended or folded away, depending on conditions.
8
9
77

15
Customer Helpline 0845 077 8888
Cleaning and Maintenance
Cleaning
Exchanging the Cutting Device
Maintenance
Always disconnect the plug from the mains socket before working on the trimmer.
Any work that is not described in these Instructions must be carried out by a competent
repair shop. Only use original parts and be very careful with the line cutter during
installation work. Danger of injury!
Do not spray water onto the trimmer and do not clean it under flowing water. This would
result in the danger of an electric shock and the trimmer could be damaged.
Always keep the trimmer clean. Do no use cleaning agents and solvents.
• After the work has been completed remove all grass and soil from the cutting device and the
protective cover.
• Ensure that the ventilation slots are always clean and free of grass.
• Clean the trimmer with a soft brush or a cloth.
Never manipulate the cutting device by inserting worn out parts. We recommend you use
original genuine parts. Never use metal lines.

16
Customer Helpline 0845 077 8888
Replacing the Line Spool
Maintenance
• Disconnect the plug from the mains socket.
• Turn over the trimmer so that the cutting head (11) is facing upwards.
• Simultaneously press the two retaining tabs on either side of the cover (11) and remove the cover
(17).
• Remove the line spool (18) from the cutting head (11).
• Insert the new spool with the smooth side facing upwards in the cutting head and thread the two
lines through the line eyelets (16). Ensure that the line ends do not slip out of the spool slots.
• Replace the cover.(17) Ensure that the retaining tabs on the cover (17) are accurately inserted in
the corresponding recesses of the cutting head. They lock in audibly.
• Press the retaining head (see 15), release it again and pull the ends of the cord out a little. Repeat
this process until the ends of the cord project a little beyond the cord cutter (12).
Check the line cutter. Never operate the trimmer without the line cutter or if the line cutter is
defective. A defective line cutter must only be repaired by an authorised servicing agency.
10
11
15
16
18 17
Storage
• Carefully clean the trimmer and its accessories after each use (see chapter on cleaning and
maintenance), thereby avoiding mould formation.
• Store the trimmer in a dry place well out of reach of children.
• Do not expose the trimmer for extended periods to direct sunlight.
• Do not wrap plastic sacks around the trimmer as this could result in the formation of moisture and
mould.
• Do not stand the trimmer on its protective cover. Suspend it by its upper handle in such a
manner that the protective cover does not come into contact with other objects. This is because
the protective cover could become deformed, thereby changing its dimensions and its safety
properties.

17
Customer Helpline 0845 077 8888
General Troubleshooting
Troubleshooting
If you feel that your trimmer is not working correctly, follow the instruction below. If this does not solve
the problems, please contact a competent repair agent.
WARNING!Before proceeding, switch off and unplug.
Check that the spool housing can rotate freely. Carefully clean it if necessary.
Check that the cutting line does not protrude more than 8cm from the spool housing. If it does, cut it
off so that it just reaches the line trimming blade.
Technical Data Table
Disposal and Recycling
Getting Help
Technical Data
Disposal
Specification Value
Rated voltage 220-240V~, 50Hz
Power 430W
No load speed 10300min-1
Cutting width 28 cm
Line diameter 1.4 mm
Line length 2x5m
Weight 2.2 kg
Sound pressure level (dB) 74 dB(A)
Possible noise variation value (dB) 3 dB
Sound Power level Lwa (dB(A)) 96 dB(A)
Vibration value 6.0m/s2(front handle) 4.8m/s2(rear handle)
uncertainty K =2.4m/s2
Do not dispose with household waste.
Recycle products and components according to local legal requirements.
After sales helpline number: 0845 077 8888
Spare parts purchases: www.homebasespares.co.uk