Quatech SS-USB-100 User manual

May/07 MN3000000034
1
SS-USB-100
User Manual
Ver. 4.00
All brand names and trademarks are properties of their
respective owners.

May/07 MN3000000034
2
Features and Benefits
zConverts a USB port to a standard 9-pin serial port
zSupports various serial devices such as modems, PDAs, cellular
phones, digital cameras, card readers, and more
zEasy Plug and Play Installation
zSupports serial transmission rate up to 230,400 bps
zNo IRQ resource required
zBus Powered – no separate power supply or battery required
zSupports Windows® 2000, XP, Server 2003 and Vista
zCable Length: 1.5 m
Connectors
z1 x USB Type A connector
z1 x DB9 Male Connector
Package Contents
z1 x SS-USB-100
z1 x Driver CD

May/07 MN3000000034
3
System Requirements
zWindows® 2000/XP/Server 2003/Vista
zUSB 1.1 or higher port
Driver Installation
For Windows® 2000/XP/Server 2003
1. Don’t plug in SS-USB-100 connector of your computer until
driver installation is complete.
2. Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3. At the Windows desktop click Start, then Run.
4. Type D:\Drivers\USB\SS-USB-100\Setup.exe, then click OK.
(Change D: to match your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the installation.
6. Plug the SS-USB-100 into your computer’s USB port.
7. Open “Device Manager” under System Properties and check if
there is the device you install under “Prolific USB-to-Serial
Comm Port…”.
8. The SS-USB-100 is now ready to use.

May/07 MN3000000034
4
For Windows® Vista
1. Don’t plug in the SS-USB-100 into the USB connector of your
computer until driver installation is complete.
2. Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3. At the Windows desktop click Start, then Run.
4. Type D:\Drivers\USB\SS-USB-100\Setup.exe, then click OK.
(Change D: to match your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the installation.
6. Plug the SS-USB-10 into your computer’s USB port.
7. Open “Device Manager” under System Properties and you should
see the device listed as “Prolific USB-to-Serial Comm Port …”.
8. The SS-USB-100 is now ready to use.
Changing COM Port Number
Some serial devices need a special COM port in order to work. If your
serial device works properly, do not change this setting.
1. From the Device Manager window double click Ports(COM &
LPT), then double click the Prolific USB-to-Serial Comm Port
you want to change.
2. Click Port Settings tab and click Advanced… button.

May/07 MN3000000034
5
3. Click the down arrow that is next to the COM Port Number box,
select a COM port that is not in use, then click OK.
4. Click OK, then close Device Manager to save the changes.