Quest Leisure Products 120010 User manual

Instant
Utility Shelter
Instruction Manual
Code: 120010
to Assemble
Nothing

Quest Leisure
Page 2
Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
This is not a toy. Children should not be left unattended with the product. Injury or death may result from
fire if the fabric is exposed to open flame. Take care opening or unfolding any part of this product as
moving or folding parts could trap fingers.
!
Please Read Before First Use
• The utility shelter frame is made to be easily erected, but take care when erecting and taking down the utility shelter. Always ensure that
nothing is twisted or caught in the frame.
• NEVER force the frame, it will open or close without the need for undue force. Applying undue force could damage the frame and would
invalidate your warranty.
• Although extremely easy we recommend that you put this utility shelter up and down a few times at home or in an area such as a
basement or garage before putting it up outside. This allows you to get used to the process before putting it up in an area that could be
exposed to wind and rain.
• The utility shelter can be put up by one person, but it is easier to erect with two people.
• We recommend that you always peg the utility shelter down with all the available pegging points and guy lines.

Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Quest Leisure
Page 3
Erecting the utility shelter
• Place the shelter on the ground and extend the 4
legs.
• Hold the central hub at a comfortable height. Gently
push the upper and lower hubs together. Insert the
safety locking hook.
• Straighten the four corner legs and lock into
position.
• IMPORTANT: Peg all 4 corners and guy lines as
shown.
1
2
3
4

Quest Leisure
Page 4
Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Taking the utility shelter down.
• IMPORTANT: Unzip the front door fully before
starting. Unpeg the corners and guy lines.
• Release the locks and lower each leg.
• Remove safety locking hook. Disconnect the upper
and lower central hubs. The legs will automatically
fold down and in.
• IMPORTANT: Ensure the leg is not twisted as
failure to do so can cause damage to the knuckle
joint.
• Fold 4 legs towards central hub. Roll tent and place
into carry bag.
1
2
3
4

Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Quest Leisure
Page 5

Quest Leisure
Page 6
Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
General Usage
• The shelter is an external product and designed to be used outside.
• Due to the changeable weather conditions it is recommended that you always use all of the guy lines and pegging points in order to
secure your shelter.
• It is also recommended that the shelter not be left unattended. Due to the nature of outdoor products along with the changeable weather
conditions and differing ground conditions, many unexpected circumstances can occur. If the shelter is left unattended it could impact the
performance of the shelter.
• If the shelter is going to be left unattended for an extended period of time (longer than a couple of days), we recommend to take the
shelter down.
• Coating: Over time the water resistant and U.V. coating of the material can deteriorate. This can be repaired by the use of a re-proofing
spray as listed in the maintenance section of the instructions.
• Condensation : This is a natural occurrence with any outdoor product. It is impossible to prevent completely and will occur depending
upon the weather conditions. Condensation can be improved upon (but never removed) by ensuring adequate ventilation in the product.

Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Quest Leisure
Page 7
Wear and Tear
• The shelter is used outdoors and thus will be subject to standard wear and tear caused by the weather and other external influences. This
section lists some, but not all of the standard wear and tear you may get with your shelter.
• Fading : With all polyester materials used outdoors some fading or colour changing will occur. This will change depending upon how
often you use it, how long it is up when you use it, what the weather is like when you use it and other external influences such as shade
etc. This fading only affects the look of the material and does not affect the performance of the screen house. It is a natural process and
cannot be avoided.
• Fading can be improved by using a proofing spray as listed in the maintenance section below.
Maintenance
• The shelter fabric is a coated polyester fabric and is used outdoors. Maintenance of the screen house can improve the life span of the
product and helps ensure it maintains its excellent performance for longer.
• You should clean the shelter if it becomes dirty. Dirt and grime, if left can become mould and algae. These can attack and damage the
fabric. We recommend you use a dedicated awning or tent cleaner (such as Fenwicks awning and tent cleaner).
• IMPORTANT: After cleaning your shelter you must reproof the shelter as the cleaner may well remove the coating on the fabric. We
recommend you use a dedicated re-proofing spray (such as Fenwicks awning and tent re-proofer, or Fabsil waterproofer).

Quest Leisure
Page 8
Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Warranty Information
• This product comes with a full 12 month manufacturers defect warranty and covers any manufacturers defects for one (1) year from the
date of the original purchase. It does not cover any damage occurred through:
• The product falling or being dropped.
• The product has been technically changed by the owner or another third party
• Improper use of the product and normal wear and tear.
• Screen tears, tent tears or any damage due to high wind conditions or unattended use.
• The affected part will be replaced or repaired (manufacturers option) if they are found to be defective within the one (1) year time frame.
• The warranty will be void if the product has been subject to neglect, misuse, improper installation, misapplication, alteration or accident
including, but not limited to, improper installation, maintenance or use of unauthorised parts or attachments.
• Damage caused by not following the instruction manual in full will invalidate the warranty, if this results in consequential damages, Quest
will not be liable for these damages or any costs incurred due to these damages.
• Quest will not be liable for material damage or personal injury caused by improper use or if the safety instructions are not properly
executed in full.
• The warranty does not cover any articles left inside the screen house. Any article placed inside the screen house is done at the owners
risk and is not covered under this warranty.
• The warranty does not cover damage caused by the weather. The product is not weather tight and water or wind can get inside the
screen house at any time so any damage caused by the weather is not covered by the warranty.
• The warranty does not cover wear and tear, which can include, but is not limited to:
• Wear and tear.
• Shrinkage in the material.
• Colour fading.
• Discolouration.
• All claims must be made though the retailer you purchased the product from and not direct with the wholesaler or manufacturer.
• Warranty claims cannot be honoured without an original dated receipt and or proof of purchase.
• By executing repairs the original warranty period of (1) one year will not be extended, nor the right to a complied new warranty. This
warranty is only legal in European countries. This warranty does not overrule the European directive 2011/83/EU.

Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Quest Leisure
Page 9
Warranty Claim
• In the unlikely event of a warranty claim, you must contact your retailer in the first instance.
• If you have not registered your screen house, first fill out the registration form overleaf and take this with you when you go to your retailer.
• Take the shelter to your retailer that you purchased it from along with your proof of purchase and explain the issue with the retailer.
The retailer will then check the shelter and liaise with the wholesaler or manufacturer on your behalf. They will keep you informed of the
progress of the claim.
• The wholesaler or manufacturer will not (unless under special circumstances) contact with you as all communication will be between
yourself and the retailer.
Registration
• Please register this screen house as this will help us improve any questions, support and warranty claims you may have at a later date.
• You can register the shelter either by sending in the registration form found on the back of this form or by registering it on the Quest
website at http://www.questleisure.com.
• The form only takes a minute to complete and it will register your details with us so we can speed up any claim at a future date.
• We do not pass your information onto anyone else. We do not let any third party have access to the data.

Quest Leisure
Page 10
Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Your Name:
Your Email:
Your Address:
Retailers Name:
Retailers Address:
Purchase Date:
Utility Shelter (standard) Registration

Instant
Utility Shelter
Product Code: 120010
Instruction Version: 3
Quest Leisure
Page 11
Information
Page left intentionally blank

www.questleisure.com
Correct Disposal
This marking indicates that this product should not be disposed with other household wastes though
out the EU. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote sustainable reuse of material resources.
To return your used product, please use the return and collection systems or contact the retailer from
where the product was purchased.
Specifications
Fabric: 190T PU Coated Oxford Polyester
UV Rating: 50+
Size: 155 x 155 cm*
Height: 205 - 220 cm*
Packed: 17 x 17 x 105 cm*
Total Weight: 5.5 kg*
The manufacturer reserves the right to change the products characteristics without prior notice.
Instant Utility Shelter
Code: 120010
* All sizes and weights are approximate