Quoizel CHI9011IB Mounting instructions

1of2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
Pleasegoto forproductcleaningtips.Gotothe selection.
(1)MediumBasebulb100WMaximum,Alternatebulb(1)23WCFL.
www.quoizel.com Care + Maintenance
LightSource:
ToolsRequired: Flathead screwdriver,Phillipsscrewdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
EstimatedAssembly Time:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Assembly Instruction Sheet #IS-CHI9011IB
For Style CHI9011IB
Package Contents
Fixture Body
x1
B
STEP 1 Remove Package inside of
the Fixture
-
A. Unscrew Allen Screws on the Fixture
Hood and remove Fixture Hood from
the Cage.
B. Remove Styrofoam inside of the Cage.
C. Unscrew Screws and Tabs on the top
edge of the Glass. Remove the Glass
from the Cage and remove Foams
around the Glass.
Allen Screw
Cage
Fixture
Hood
Figure 1
Styrofoam
STEP 2 Install Glass, Bulb and
Fixture Hood
-
A. Place the Glass back into the Cage and
secure with the Tabs and Screws.
B. This fixture uses standard bulb with
medium base. Maximum 100 watts.
Insert bulb and screw snugly into
place.
C. Place the Fixture Hood back onto the
Cage and secure with Allen Screws.
Hand tighten until snug.
Allen
Screw
Screw
Fixture
Hood
Figure 2
Bulb
Socket
STEP 3 Drill Pilot Holes on Post-
A. Carefully fit the Post Fitter over the
end of the Post (not supplied),
making sure the Post Fitter is fully
seated.
B. Mark the drill point for the (3)
Mounting Screws, using (3)
Mounting Holes as reference. After
marking hole locations, remove
fixture from post and drill 1/16” pilot
holes for screws.
Post
Post Fitter
Figure 3
Mounting Hole
STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
White wire
from supply White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 4
A
Mounting
Screw
x3
July2015
STEP 5 -Attach Fixture Body to Post
A. Coat the top 1” of the Post with Clear
Silicone Caulk (not supplied) and
position the Post Fitter onto the Post.
Be sure to seat it completely, aligning
the holes in the Fitter with the 1/16”
Pilot Holes drilled into the Post.
B. Secure the Fixture to Post with (3)
Mounting Screws (A).
Your fixture is now assembled and
ready to use. Enjoy!
Post
Post Fitter
Figure 5
Mounting Hole
Screw
Tab
Glass
Foam
Tab
Glass
Cage

2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc. July2015
HOW TO REPLACE GLASS
A. Fixture
Hood and remove Fixture Hood
from the Cage.
B. Remove Bulb from inside of the
Cage.
C. Unscrew Screws and Tabs on the
top edge of the Glass and replace
the Glass. Re-attach the Tabs and
Screws onto the top edge of the
replacement Glass to secure it
properly.
D. Re-install the Bulb and re-attach
the Fixture Hood to the Cage.
Secure with Allen Screws and
hand tighten until snug.
Unlock Allen Screws on the
Figure 6
CHI9011IB
FINISH: IMPERIAL BRONZE
(1) 100W
Bulb
(Not Supplied)
Medium
Base PART NUMBER
1
NO. PART NUMBER REPLACEMENT PART REQ.
G2861SH 1
GLASS SHADE
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
1
Fixture Hood
Allen
Screw
Screw
Tab
Glass
Bulb
Socket
Cage
10.5" Dia.
21.5"