Quoticare BP101U User manual

Model No.: BP101U
Model No.: BP101U
Digital Blood Pressure Monitor
Digital Blood Pressure Monitor
Fully Automatic Upper Arm Style
Thanks for choosing the Digital Blood Pressure Monitor.
Please read this instruction manual before using your unit.
Please keep this instruction manual safe for future use.
Instruction Manual
Lead a Healthy Life...
0197
QUOTICARE
QUOTICARE
Distributed by:
S&S Tradings, Australia
PO BOX 3364,
Sunnybank South, QLD 4109
[email protected]
http://www.ss-tradings.com.au
VER:A00
S&S Tradings

The unit uses the oscillometric method of blood pressure
measurement. It means the unit detects the movement of your
blood through your brachial artery, and converts your blood
pressure into a digital reading. The unit is simple to use because a
stethoscope is not needed while using an oscillometric monitor.
Thank you for purchasing Fully Automatic Upper Arm Style Digital
Blood Pressure Monitor.
The unit stores automatically 60 sets of measurement values. You
can read the stored data conveniently by pressing the memory
button.
The unit comes with the following components:
• Main Unit
• Arm Cuff
• Instruction Manual printed in English
Introduction................................................................................................1
Symbols Use..............................................................................................2
Important Safety Notes..............................................................................3
Warning and safety notices........................................................................4
Konw Your Unit.......................................................................................5-6
Quick Reference Guide ............................................................................7
Battery lnstallation/Replacement...............................................................8
Adjusting Settings
1. To set year........................................................................................9
2. To set date and time........................................................................10
3. To set time .......................................................................................11
4. To set unit........................................................................................11
5. To set user........................................................................................12
Before Using the Monitor
Before Using the Monitor
Care and Maintenance
Care and Maintenance
Operating Instructions
Operating Instructions
Before Taking A Measurement.................................................................13
Proper Use of the Arm Cuff................................................................14-15
Take a Measurement .........................................................................16-17
Use the Memory Function
To read the average value...................................................................18
To read the measurement value..........................................................18
To delete the memory value................................................................19
About Blood Pressure
IHB Introduction...................................................................................20
Blood Circulation .................................................................................21
Health and Blood Pressure .................................................................21
Classification of Blood Pressure .........................................................22
Troubleshooting and Maintenance
Error Indicators....................................................................................23
Eliminate Fault.....................................................................................23
Maintenance........................................................................................24
Specifications ..........................................................................................25
Statement................................................................................................26
EMC Table..........................................................................................27-29
Warranty Infrmation.................................................................................30

3
2
Symbols Use
Symbols Use
To assure the correct use of the product basic safety measures
should always be followed including the precautions listed below:
Indicates a potentially hazardous situation
Type BF applied part
Refer to instruction manual/booklet
MANUFACTURER
SERIAL NUMBER
The marking of electrical and electronics devices
according to Directive 2002/96/EC.
The device,accessories and the packaging have to be disposed
of waste correctly at the end of the usage.
Please follow Local Ordinances or Regulations for disposal.
AUTHORISED REPRESENTATIVE IN THE
EUROPEAN COMMUNITY
which, if not
avoided, could result in death or serious injury.
SYMBOLS
SYMBOLS
USED
USED
IN
IN
THIS
THIS
INST
INSTR
UCTION
UCTION
MAN
MANU
AL
AL
WARNING
WARNING
CAUTION
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury to the user or
patient or damage to the equipment or other property.
Read all information in the instruction manual and any other
literature included in the box before using the unit.
Contact your physician for specific information about your blood
pressure. Self-diagnosis and treatment using measured results
may be dangerous.Follow the instructions of your healthcare
provider.
Operate the unit only as intended. Don't use for any other purpose.
The unit is intended to use in measuring blood pressure and pulse
rate for adult only, not recommended for neonatal baby at home or
medical centre.
Do not use a cellular phone near the unit. It may result in
operational failure.
Please avoid using in high radiant area in order to make your
measuring data correctly.
Do not disassemble or attempt to repair the unit or components.
Do not use the equipment where flammable gas (such as
anesthetic gas, oxygen or hydrogen) or flammable liquid (such as
alcohol) are present.
Do not use a mobile phone or other devices that emit
electromagnetic fields, near the unit. This may result in incorrect
operation of the unit.
Indicating that too frequent measurements can cause injury to the
PATIENT due to blood flow interference;
Remove the batteries if the unit will not be used for Three months
or More.
Regarding the application of the CUFF over a wound, as this can
cause further injury;
Regarding the effect of blood flow interference and resulting harmful
injury to the PATIENT caused by continuous CUFF pressure due to
connection tubing kinking;
Transport package shall be kept away from rain.

Know Your Unit
Body
Display
Air Socket
Memory Button
Setting Button
START/STOP Button
Display
Systolic Blood Pressure
Diastolic Blood Pressure
Unit Indicator
Date/Time
Inflation/Deflation Symbol or
WHO Indicator
Memory & Times
User Symbol
Battery Indicator
Irregular Heartbeat Symbol
Pulse
Heartbeat Symbol
Average Value Symbol
Battery Compartment
Warning and safety notices
Warning and safety notices
Regarding the application of the CUFF and its pressurization on
any limb where intravascular access or therapy, or an arterio-
venous (A-V) shunt, is present because of temporary interference
to blood flow and could result in injury to the PATIENT;
Regarding the application of the CUFF and its pressurization on
the arm on the side of a mastectomy;
Regarding the need to check (for example, by observation of the
limb concerned) that operation of the AUTOMATED
SPHYGMOMANOMETER does not result in prolonged
impairment of the circulation of the blood of the PATIENT.
When the arm is oppressed by air pressure,please loosen
CUFF or remove batteries.
Regarding the information that pressurization of the CUFF can
temporarily cause loss of function of simultaneously used
monitoring ME EQUIPMENT on the same limb;
5
4
Not touch the patient and battery output simultaneously when
measurement.
Warning: not allow to use the luer connetors.If Luer lock connectors
are used in the construction of tubing, there is a possibility that they
might be inadvertently connected to intravascular fluid systems,
allowing air to be pumped into a blood vessel.

7
6
Know Your Unit
Know Your Unit
Please keep the instruction manual
well after using.
Instruction Manual
3 AA Alkaline Batteries
Power
Fit for 22cm~36cm
range of upper arm
perimeter
If your arm cuff is broken or not functional, please use a new cuff.
A new arm cuff does not include an air plug. Please continue to use the
old air plug on the new arm cuff.
Hose
Air Plug
(Insert to Air Socket)
Metal
Arm Cuff
Warning:
Do not use rechargeable batteries.
Press the “ ” button.
All symbols appear,then the cuff
starts to inflate automatically.

9
8
Install 3 “AA” size batteries
so the + (positive) and - (negative)
polarities match the polarities
of the battery compartment
as indicated.
Remove the battery cover
from the battery
compartment.
Replace the battery cover.
Use four identical 1.5V alkaline batteries type AA/LR06.
Do not use rechargeable batteries.
Replace both of the batteries if the symbol of low battery
appears on the display.
Never leave any low battery in the battery compartment
since they may leak and cause damage to the unit.
Disposal of used batteries should be carried out in accordance
with the national regulations for the disposal of batteries.
Press the “MEM” button to increase one year.
Long press the button and the value quickly changes.
Adjusting Settings
Adjusting Settings
1.1 All information will appear
when the batteries are
installed at the first time.After
2 seconds the year flashes.
Finally, press the “SET” button
and continue with step 2.
1. To set year
1. To set year
1.2 The mark of year appears and flashes after press the “ SET”
Setting button for 3
~ 4 seconds , while the unit is off . Finally,
press the “ SET” button again and continue with step 2.
The year can be set between 2014 and 2050, and it will return
to 2014 when the display of year up to 2050.
+
+
-
+
-
-
+
-
+
+
-
-

Then press the “MEM” button again to change the current unit.
Press the “ ” button to save the current setting and turn off.
“mmHg”display “kPa”display
10
You can stop setting anytime when you press the “ ”
You can stop setting anytime when you press the “ ”
button to save the current setting and turn off.
button to save the current setting and turn off.
Unit Setting
KPa&mmHg
Adjusting Settings
Adjusting Settings
4. To set unit
4. To set unit
11
Adjusting Settings
Adjusting Settings
Then press the “MEM” button again to change the current the 12 hour
or the 24 hour.
Press the “SET”
button again and Continue with step 4 .
12 hour format 24 hour format
The 12 hour or
the 24 hour Setting
3. To set the 12 hour or the 24 hour
3. To set the 12 hour or the 24 hour
Press the “MEM” button to change the month and press the
“SET”
button and continue with next step. Then set the day, the
hour and the minute by using the same way. Continue with step 3.
2. To set date and time
2. To set date and time

13
12
Adjusting Settings
Adjusting Settings
Before Taking A Measurement
Before Taking A Measurement
1.Avoid eating,drinking alcohol, smoking, exercising and bathing for
30 minutes before taking a measurement and 5 minutes should
elapse before the first reading is taken.
2.Stress raises blood pressure.Avoid taking measurements during
stressful times. Relax as much as possible and no talking during the
measurement procedure.
3.The cuff can be applied to your left or rightArm.Always measure
your blood pressure on the sameArm.
4.Measurements should be taken in a quiet place.
5.Position the unit at heart level throughout the measurement.
6.Keep a record of your blood pressure and pulse readings for your
physician.A single measurement does not provide an accurate
indication of your true blood pressure.You need to take and record
several readings over a period of time. Try to measure your blood
pressure at the same time each day for consistency.
7.Wait 30~60 seconds between measurements.The wait time allows
the arteries to return to the condition prior to taking the blood
pressure measurement.You may need to increase the wait time
depending on your individual physiological characteristics.
5. To set user
5. To set user
The mark of a user will appear when pressing the “SET” button,
then press the “SET” button again to change the current user.
Finally, press the “ ” button to confirm user and turn off.

14 15
Proper Use of the Arm Cuff
Proper Use of the Arm Cuff
8
Relax your arm, keep the
palm upward and the
fingers curving naturally,
then turn on the unit and
start to measure.
Wrap the cuff tightly around
your upper arm by using the
Velcro strip. Do not leave
any spacing between the
arm and the cuff.
7
1 ~ 2cm
The hose runs down the
inside of your arm. The
bottom of the cuff should be
approximately 1~2cm above
your elbow.
6
5
Put your arm through the
loop, then pull it up to the
position of your upper arm.
Proper Use of the Arm Cuff
Proper Use of the Arm Cuff
4
Pass the end of the
cuff through the metal,
and keep the hose
outward.
Sit in a chair with your
feet flat on the floor.
Place your arm on a
table so as to level the
cuff to your heart.
3
Remove all clothes from
your upper arm allowing
the cuff to fit directly on
the skin.
2
Make sure the air plug is
inserted properly in the
main unit.
1

16 17
Take a Measurement
Take a Measurement
4
NOTE:
NOTE:
To stop the inflation or measurement, press the “ ” button in
anytime,the unit will stop inflating and then release and turn off.
Press the “ ” button to turn off the unit.
The unit will automatically turn off after 2 minutes if you have
forgotten to turn it off.
Inflation stop automatically and the measurement is
started.
2
The heartbeat symbol flashes once a pulse is detected.
Take a Measurement
Take a Measurement
The cuff is deflated
automatically, and all of the
measurement results are
stored in the memory with
date and time.
The “ ” symbol will be
displayed if
irregular heartbeat
is detected.
IHB
3
The blood pressure and pulse rate are displayed when
the measurement completed.
"IHB" display"mmHg" display
"kPa" display
Press the “ ” button.
1
All symbols display
Start to inflate
Deflating automatically
Maximum inflation
Inflating
Start toinflate
All display symbols appear on the screen. The cuff starts to
inflate automatically.